Injection Of Polymers
Mostrando 1-12 de 59 artigos, teses e dissertações.
-
1. Injection Shrinkage аnd Water Sorption of Some Thermoplastic Dental Materials
Abstract Objective: To evaluate the change of diameter of different injection-molded thermoplastic materials. Material and Methods: Four thermoplastic injection-molded materials were analyzed (Bre.flex 2nd edition, Vertex ThermoSens, Perflex Biosens and Polyan IC). A total of 432 test samples were made in the form of an "hourglass". All samples were divide
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
2. Estudo da substituição do nylon por compósito de polipropileno com fibra de vidro
RESUMO Peças fabricadas com polímeros de alto desempenho têm sido substituídas por materiais similares, sendo produzidas com uma composição de polipropileno (PP), que tem um custo mais baixo. Uma das composições mais comumente utilizadas é a junção do polipropileno com fibras, resultando na formação de um novo material, com características dife
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Toughening of bio-PE upon addition of PCL and PEgAA
Abstract Researches of polymer blends based on biological and biodegradable polymers appear as a viable alternative to develop environmentally friendly materials. Therefore, the aim of this research was to produce compounds made with biological polyethylene, i.e., Biopolyethylene, Bio-PE, added to the biodegradable Polycaprolactone (PCL) and functionalized b
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
4. Analysis and modeling of simulated residual stress of mold injected plastic parts by using robust correlations
ABSTRACT The injection molding process is the most widely used processing technique for polymers. The analysis of residual stresses generated during this process is crucial for the part quality assessment. The present study evaluates the residual stresses in a tensile strength specimen using the simulation software Moldex3D for two polymers, polypropylene an
Matéria (Rio J.). Publicado em: 02/10/2017
-
5. Thermo-Mechanical Properties of P(HB-HV) Nanocomposites Reinforced by Nanodiamonds
Several studies of biodegradable polymers and copolymers have been carried for different applications in the biomedical area. This current study aims to develop a biocomposite to be used as an orthopedic device, using poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(HB-HV), a biodegradable copolymer, with 94%HB and 6%HV, as matrix; and nanodiamonds (ND) with p
Mat. Res.. Publicado em: 26/06/2017
-
6. Recycling and Mechanical Characterization of Polymer Blends Present in Printers
More and more electronic devices are being produced and most of them are disposed of improperly. In addition, as they contain heavy metals and toxic substances in their composition, the environmental impact increases. This work aims to study the recycling of polymers present in e-waste through the mechanical characterization of polymer blends produced with t
Mat. Res.. Publicado em: 22/06/2017
-
7. Molecular weight and tacticity effect on morphological and mechanical properties of Ziegler–Natta catalyzed isotactic polypropylenes
The morphological and mechanical properties of Ziegler–Natta catalyzed isotactic polypropylenes as influenced by the molecular weight and tacticity was investigated. Polypropylene samples were injection moulded into standard disks with a HAAKE MiniJet II injection moulder at 190 °C and 200 bar for morphological and mechanical tests. The morphological and
Polímeros. Publicado em: 04/12/2015
-
8. The Recycling of Sugarcane Fiber/Polypropylene Composites
Mechanical recycling is utilized to reuse waste and obtain other plastic products via the reprocessing of a material in industrial equipment. Natural fiber composites have become more popular in recent years; however, these composites' mechanical behavior remains less well-understood than single polymers’ behavior after recycling. Therefore, the objective
Mat. Res.. Publicado em: 2015-08
-
9. Environmental Stress Cracking of Poly(3-hydroxibutyrate) Under Contact with Sodium Hydroxide
Environmental stress cracking (ESC) is one of the most important causes of polymer premature failure, occurring when a combination of mechanical load and an aggressive fluid is applied. The phenomenon is well know by polymer producers and product designers but its mechanisms are not very well understood. Although the ESC effects of many commercial polymers a
Mat. Res.. Publicado em: 2015-04
-
10. Evaluation of the influence of the use of waste from the processing of rice in physicochemical properties and biodegradability of PHB in composites
The high calorific value of rice husks has elevated its reuse as an energy source; however, the burning of these shells generates a waste ash from rice husk ash (RHA), which makes its disposal a concern. Despite advances, biodegradable polymers are not yet able to compete with those of traditional thermoplastics, which have lower production cost and higher p
Polímeros. Publicado em: 2014-12
-
11. Vibrational analysis of coconut fiber-PP composites
Many researchers have been studying coconut fibers due to its being a natural and renewable source. Moreover, coconut waste is discarded in landfills, bringing environmental problems because this material, although natural, takes time to be degraded. The use of natural fibers such as coconut fibers has become industrially attractive because of its low cost,
Mat. Res.. Publicado em: 17/12/2013
-
12. Evaluation of the effect of the incorporation of rubber tire waste particles on the properties of PP, HIPS and PP/HIPS matrices
In recent years, the consumption of plastics has been increasing and as consequence, the waste generated has also increased. Rubber tire (RT) waste is another residue which causes significant problems to society. In view of the considerable amounts of RT waste generated, this study aimed to evaluate the influence of the incorporation of RT particles into pos
Polímeros. Publicado em: 16/04/2013