In Situ Optical Microscopy
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Influence of Forging Pressure on Microstructural and Mechanical Properties Development in Linear Friction Welded Al-Cu Dissimilar Joint
Abstract Dissimilar AA5083 and C101 pure copper linear friction welds were prepared using different forging pressures (60 MPa, 80 MPa, and 110 MPa) to investigate the influence of the forging pressure on the microstructural and mechanical properties development using optical microscopy (OM), scanning electron microscopy (SEM), hardness measurements, and ten
Soldag. insp.. Publicado em: 18/04/2019
-
2. Effect of Weathering and Accelerated Photoaging on PET/PC (80/20 wt/wt%) Melt Extruded Blend
In this study we investigated the natural weathering of a catalyzed blend of poly(ethylene terephthalate)/polycarbonate PET/PC (80/20wt/wt%). The results were compared to the accelerated photoaging tests. The specimens were characterized by wide angle X-ray diffraction (WAXD), optical microscopy (OM), thermogravimetry (TG/DTG), medium infrared spectroscopy (
Mat. Res.. Publicado em: 25/08/2015
-
3. Influência do alinhamento de nanotubos de carbono nas propriedades elétricas de nanocompósitos de matriz epoxídica / Influence of the alignment of carbon nanotubes in the electrical properties of epoxy matrix nanocomposites
Epoxy resin / carbon nanotubes (CN) composites are widely used due to the versatile matrix phase and the excellent properties of the reinforcing phase. However, the development of polymer nanocomposites still faces three important challenges: interfacial interaction, dispersion and orientation of the reinforcing phase. This work studied the orientation proce
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/02/2012
-
4. Corrosion in Haas expanders with and without use of an antimicrobial agent: an in situ study
OBJECTIVES: The purpose of this study was to evaluate in situ the occurrence of corrosion in the soldering point areas between the wire, silver brazing and band in Haas expanders. MATERIAL AND METHODS: Thirty-four 7-12-year-old patients who needed maxillary expansion with a Haas expander were randomly assigned to two groups of 17 individuals each, according
Journal of Applied Oral Science. Publicado em: 2011-12
-
5. Deformation and fracture of an alpha/beta titanium alloy
Titanium alloys are used in the aero-spatial, energy and biomaterial industries among others and exhibit high specific strength and fracture toughness. Their mechanical properties show a strong dependence on the microstructure, especially on the size and morphology of the constituent phases. An experimental evaluation was done to a better understanding of th
Matéria (Rio de Janeiro). Publicado em: 2010
-
6. Implantação iônica de baixa energia em polímero para desenvolvimento de camadas compósitas nanoestruturadas condutoras litografáveis. / Low energy ion implantation into polymers to develop conductive composite layers for lithography.
Electronics using polymers instead of silicon is a recent research area with promising economic perspectives. Polymer with metallic particles composites presents interesting electrical, magnetic and optical properties and they have been produced by a broad variety of techniques. Metal ion implantation using plasma is one of the used methods to obtain conduct
Publicado em: 2010
-
7. Estudo da corrosão do aço ao carbono em meio de sulfeto
This work presents a study of the 1020 and 1040 carbon steel corrosion in aqueous solution containing dissolved H2S in order to investigate the effect of H2Saq and HSaq species. Some different electrolytes were used: acetic acid buffer and phosphate buffer in presence or absence of 3.5 wt% NaCl solution containing 10, 25, 50, 100, 200, 500, 1000 and 2000 ppm
Publicado em: 2009
-
8. PREPARATION FOR SUPPORTING COMPOSITE POLIANYLINE IN MATRIZES OF COPOLYMERS ESTYRENE-DIVINYLBENZENE AND STUDIES OF ADSORPTION BY EXCHANGE IONIC OF COMPLEX ANIONS OF [FeCl4]- AND [CuCl4] 2- / PREPARAÇÃO DE COMPÓSITOS DE POLIANILINA EM MATRIZES DE COPOLÍMEROS ESTIRENO-DIVINILBENZENO E ESTUDOS DE ADSORÇÃO POR TROCA IÔNICA DE ÂNIONS COMPLEXOS DE [FeCl4]- E [CuCl4]2-
In this work, composites of dispersed polyaniline in beads of styrenedivinybenzene copolymer (Pani/Sty-DVB copopolymer) with different porosities were prepared through in situ polymerization. Materials with high surface areas and high porosities were obtained what explain their properties to adsorve transition metals. SD29 and SD84 copolymers were prepared t
Publicado em: 2008
-
9. Avaliação da atividade microbiana metanogênica na lagoa de estabilização anaeróbia da estação de tratamento de esgotos sanitários do município de Cajati, Vale do Ribeira do Iguape, Estado de São Paulo / Assessment of anaerobic methanogenic microbial activity at anaerobic stabilization pond of domestic wastewater plant at Cajati city, Vale do Ribeira de Iguape, São Paulo State, Brazil
Microbial diversity studies have remarkable relevance since the knowledge about the microbiology of process can improve plants and system efficiency. This work assessed microbial activity, specially methanogenic, at anaerobic pond for domestic wastewater treatment in the city of Cajati, São Paulo State, Brazil. Poliphasic taxonomy was adopted in onder to co
Publicado em: 2007
-
10. Phase transformations and microstructures of alloys in the Nb-Cr-Al system / Transformações de fase e microestruturas de ligas no sistema Nb-Cr-Al
The interest for new structural materiaIs for application in high temperature has created a large volume of publications concerning refractory metal-based alloys that contain intermetallic compounds. The low fracture toughness of those alloys leads to the search of combination of phases that guarantees high strength and ductility. In such a case, the best ch
Publicado em: 2005
-
11. Avaliação do diagrama de fases Ni-Al-Nb e obtenção da estrutura eutetica NiAl-NiAlNb
The solidification of an eutectic alloy results in two or more solid phases, which grow in cooperative form. Such phenomenon makes this type of alloy interesting for obtainment of in situ composites. An in situ composite shows different properties than the individual component phases, that can result in a material with interesting features with regards to me
Publicado em: 2002
-
12. Efeito da adição de elementos ternarios na microestrutura e propriedades do composito in situ Ni-Ni3Si
The fabrication of the structural components for the application in high temperatures and aggressive environments requires the use of materials that retain their chemical, mechanical and physical properties within the proper limits, even above 1000°C. In diverse systems, eutectic structure exhibits inherent thermal stability and permits obtaining an in situ
Publicado em: 2002