Hydraulic Pumps
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Hydraulic System Onboard Monitoring and Fault Diagnostic in Agricultural Machine
Abstract Agricultural Machinery as an off-road vehicle is the backbone of the World agricultural industry. Its main function is to operate as a prime mover and support the power requirements to function the various type of draft implements. In this regards, the hydraulic system is an important part and is controlled by the propagated oil which is cleaned by
Braz. arch. biol. technol.. Publicado em: 24/10/2019
-
2. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Surface drainage system for dry docks in shipyards - Case study of Estaleiro Rio Grande (Technical Note)
Abstract This study aims to present a methodology for the design of a surface drainage system for dry docks in shipyards, taking into account the rainfall intensity at the site, the damping capacity of the hydraulic structures (drainage channels) and the pumping capacity of the pumping system. A case study of a dry dock owned by Estaleiro Rio Grande, located
Rem: Rev. Esc. Minas. Publicado em: 2016-06
-
4. Determinação experimental da curva do sistema e da potência consumida em unidade de bombeamento alimentando dois tanques em desnível com fluidos diferentes / Experimental determination of the curve of the system and power consumed in pumping unit feeding two tanks in different fluids with gap
A bomba centrífuga é uma máquina dinâmica que só pode trabalhar nos pontos de sua curva. Consequentemente, a soma das resistências da tubulação e seus componentes durante a operação deve se situar exatamente na sua curva ou curva da bomba. A literatura para a seleção e especificação deste equipamento alimentando apenas um ponto como um tanque o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/12/2011
-
5. Estudo experimental de uma bomba operando como turbina para acionamento de bombas centrífugas submersas / Experimental study of a pump as turbine to drive centrifugal submersible pumps
O método de elevação artificial através do bombeio centrífugo submerso (BCS) é amplamente conhecido na produção de petróleo. Uma alternativa a este método é o hydraulic submersible pump (HSP) que consiste de uma bomba submersa acoplada ao mesmo eixo de uma turbina hidráulica, que é acionada através do fluido a elevada pressão fornecido por uma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
6. Balanço hídrico e energético de um sistema predial de aproveitamento de água de chuva / Water and energy balance of a rainwater harvesting system for a building gutter
The use of rainwater as an alternative source of water supply is a practice on the rise, mainly for its importance in conservation of water resources. However, the user often ignores the energy that this system may require, and depending on its design, can be considered a relevant factor in its application. The conceptions and components of a rainwater harve
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/04/2011
-
7. Analysis of the hydrodynamic profile of different models of roller pump used in extracorporeal circulation / Analise do perfil hidrodinamico em diferentes modelos de bombas de roletes utilizadas em circulação extracorporea
Introduction: Among the equipment used in cardiopulmonary bypass, roller pumps have great importance, with models available from several manufacturers. The roller adjustment is an important factor in the rates of hemolysis and the hemolytic potential differs in adjustment. Researchers do not always address details on the profiles of the raceway accepting tha
Publicado em: 2009
-
8. Otimização dos custos de energia elétrica na programação do armazenamento e distribuição de água em redes urbanas / Minimization of the electrical energy cost in water distribution networks
The problem focused in this study consists of reducing the eletrical energy cost necessary to the operation of hydraulic pumps. The hydraulic pumps are used to catch water from artesians wells or Water Treatment Station to supply tanks which are located in districts in a city, from which the population will be supplied by gravitational force. As the cost of
Publicado em: 2008
-
9. Performance optimization of impellers of flow hydraulic pumps from classics criteria of design - experimental verifications. / Otimização de desempenho de rotores de bombas hidráulicas de fluxo a partir de critérios clássicos de projeto - verificações experimentais.
Este trabalho tem como objetivo analisar e otimizar o desempenho de uma bomba hidráulica de fluxo através do redimensionamento de seu rotor. A partir da teoria acerca do pré-dimensionamento de rotores pelo método clássico (também conhecido como método geométrico) propõe-se uma planilha eletrônica que permite obter as dimensões básicas necessária
Publicado em: 2008
-
10. Modelagem e simulação da dinâmica de uma bomba de palhetas auto-compensada por pressão do tipo controle integral / Modeling and simulation of the dynamic behavior of vanetype pressure compensated hydraulic pumps with integral-type control
Apesar dos sistemas hidráulicos estarem entre os mais antigos meios de transmissão de energia usados pelo homem, atualmente vem recebendo muita atenção nas pesquisas científicas. A busca por maios controle da energia gerada impulsionou um aumento da utilização e aplicação e novas investigações tecnológicas de tais sistemas. Além da alta capacida
Publicado em: 2008
-
11. Desenvolvimento de indicadores de eficiÃncia energÃtica para avaliaÃÃo de pivÃs centrais de irrigaÃÃo
The task of this work is to present the development of some indicators and to create a label and energy efficiency standards for central pivoting irrigation systems. Firstly were presented policies and programs related to the efficient use of electrical energy and the methodology for the evaluation of such systems. With the approach of efficiency, losses in
Publicado em: 2008
-
12. Modelagem do escoamento monofásico em bomba centrífuga submersa operando com fluidos viscosos / On the influence of viscosity upon electrical submersible pumping performance
In the oil industry, when artificial lift using Electrical Submersible Pumps (ESP) is considered, there is a need to determine their performance for displacing oils of medium to high viscosity. This work proposes a model that is able to predict the performance of conventional centrifugal pumps and ESPs when pumping heavier oils (meaning oils of high viscosit
Publicado em: 2007