Hybrid Modeling
Mostrando 13-24 de 107 artigos, teses e dissertações.
-
13. Simulation of Stress Concentration Problems in Laminated Plates by Quasi-Trefftz Finite Element Models
Abstract Hybrid quasi-Trefftz finite elements have been applied with success to the analysis of laminated plates. Two independent fields are approximated by linearly independent, hierarchical polynomials: the stress basis in the domain, adapted from Papkovitch-Neuber solution of Navier equations, and the displacement basis, defined on element surface. The st
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
14. Strain Rate Dependent Behavior and Modeling for Compression Response of Hybrid Fiber Reinforced Concrete
Abstract This paper investigates the stress-strain characteristics of Hybrid fiber reinforced concrete (HFRC) composites under dynamic compression using Split Hopkinson Pressure Bar (SHPB) for strain rates in the range of 25 to 125 s-1. Three types of fibers - hooked ended steel fibers, monofilament crimped polypropylene fibers and staple Kevlar fibers were
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
15. UNCEMENTED ARTHROPLASTY AFTER HIP METASTATIC DISEASE AND MULTIPLE MYELOMA
ABSTRACT Objective: To describe a case series using a combination of narrative, graphical exploratory analysis and Bayesian Network modeling. Methods: Case series with 34 patients undergoing uncemented and hybrid arthroplasty procedures secondary to hip pain or fracture secondary to metastatic disease or multiple myeloma. Results: The most common tumors
Acta ortop. bras.. Publicado em: 2016-08
-
16. Online hybrid modeling method with application for predicting Bauxite production indicators
Abstract In the bauxite flotation process, concentrate grade and tailings grade are key production indicators; however, they are difficult to measure online. It is also difficult to develop an effective mathematical model for the process because of the complex non-linear and uncertain relationship among the feed parameters (feed grade, pulp density, slurry p
Rem: Rev. Esc. Minas. Publicado em: 2015-12
-
17. DEVELOPMENT OF A HYBRID FUZZY GENETIC ALGORITHM MODEL FOR SOLVING TRANSPORTATION SCHEDULING PROBLEM
ABSTRACT There has been an increasing public demand for passenger rail service in the recent times leading to a strong focus on the need for effective and efficient use of resources and managing the increasing passenger requirements, service reliability and variability by the railway management. Whilst shortening the passengers’ waiting and travelling time
JISTEM J.Inf.Syst. Technol. Manag.. Publicado em: 2015-12
-
18. Finite element modeling for buckling analysis of hybrid piezoelectric beam under electromechanical loads
A one-dimensional finite element model for buckling analysis of hybrid piezoelectric beams under electromechanical load is presented in this work. The coupled zigzag theory is used for making the model. The inplane displacement is approximated as a combination of a global third order variation across the thickness with an additional layer wise linear variati
Lat. Am. j. solids struct.. Publicado em: 2014-10
-
19. Wear prediction for dry revolute joint with clearance in multibody system by integrating dynamics model and wear model
This work presents an investigation on wear prediction of multibody system including dry revolute clearance joint using a computational methodology. A procedure to analyze multibody system in which wear is present at revolute joints is presented. The study involves integrating a dynamics model of the mutibody system with clearance joint into a wear predictio
Lat. Am. j. solids struct.. Publicado em: 2014
-
20. A hybrid method BEM-NRM for magnetostatics problems
This article proposes a new method to solve non-linear magnetostatic problems applied to the modeling of electromagnetic devices. A reduced scalar potential formulation is presented and solved by a hybrid BEM-NRM. It has been implemented and tested in a software called MaGot. We will show that the computation time of this new method is very low. Thus, it cou
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
21. Proposta de modelagem e projeto de arquitetura de controle de sistemas híbridos aplicados em processos de manufatura industrial / A modeling proposal and design of a control architecture of hybrid systems applied on manufacturing industrial processes
Com o avanço da tecnologia têm sido incrementados a complexidade dos sistemas de produção industrial. Essa complexidade está marcada pela interação das variáveis que respondem a uma dinâmica baseada em eventos discretos e as variáveis que são descritas em relação ao tempo. Isto levou para uma mudança no paradigma dos sistemas automáticos de co
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/06/2011
-
22. Modelagem matemática de escoamentos bifásicos usando o Meto- Do Espectral de Fourier / Mathematics modeling of two-phase ows using spectral method of Fourier
A simulação numérica de escoamentos bifásicos requer alta acurácia para se obter maiores detalhes do escoamento. Além disso, busca-se baixo custo computacional, pois de modo geral, as metodologias necessitam de um elevado refinamento da malha ou possuem um grande estêncil de discretização, o que as torna onerosas. Portanto, o presente trabalho prop�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/03/2011
-
23. Modelagem hÃbrida do processo de troca iÃnica em colunas de leito fixo / Hybrid modelling of ion exchange process in fixed bed column
A troca iÃnica à um processo muito utilizado no tratamento de efluentes industriais aquosos contendo compostos orgÃnicos e metais pesados. As colunas de leito fixo sÃo mais aplicadas por permitir que o processo ocorra de maneira contÃnua (ciclos de regeneraÃÃo). O projeto e a otimizaÃÃo de processos de troca iÃnica em coluna requer o uso de modelos
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/02/2011
-
24. Recent trends in the modeling of cellulose hydrolysis
This work reviews recent trends in the modeling of cellulose hydrolysis, within the perspective of application of kinetic models in a bioreactor engineering framework, including scale-up, design and process optimization. From this point of view, despite the phenomenological insight that mechanistic models can provide, the expectation that more detailed appro
Brazilian Journal of Chemical Engineering. Publicado em: 2011-12