Hollow Cathode
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Silicon Nanostructuring Using SF6/O2 Downstram Plasma Etching: Morphological, Optical and Sensing Properties
Silicon (Si) nanostructures were prepared in the downstream of radiofrequency SF6/O2 mixture plasma generated in 13.56 MHz hollow cathode discharge system. Depending on the oxygen percentage in the mixture, the obtained Si nanostructures were characterized for their different properties: etching rate, morphology, optical reflectance, photoluminescence, spect
Mat. Res.. Publicado em: 10/07/2018
-
2. Deposition of TiO2 Film on Duplex Stainless Steel Substrate Using the Cathodic Cage Plasma Technique
This research used the "cathodic cage (CC)" technique for TiO2 film deposition on duplex stainless steel substrate. This technique uses a multiple hollow cathode effect. Duplex stainless steel substrates were treated at temperatures of 300°C, 350°C and 400°C, giving a temperature value ratio (Ts/Tm) of 0.27 to 0.31 (Ts being the substrate temperature and
Mat. Res.. Publicado em: 15/09/2016
-
3. Bone tissue response to plasma-nitrided titanium implant surfaces
A current goal of dental implant research is the development of titanium (Ti) surfaces to improve osseointegration. Plasma nitriding treatments generate surfaces that favor osteoblast differentiation, a key event to the process of osteogenesis. Based on this, it is possible to hypothesize that plasma-nitrided Ti implants may positively impact osseointegratio
J. Appl. Oral Sci.. Publicado em: 2015-02
-
4. Plasma assisted parts' manufacturing: sintering and surface texturing - part II - influence of inter-cathode distance and gas pressure
The acquirements and potentiality universe of cleaning, heating and/or sputtering effects caused by plasma species bombardment phenomenon on the surface characteristics and finishing of manufactured parts treated in DC abnormal glow discharge opens a new research and development field, called here of Plasma Assisted Parts' Manufacturing (PAP'M). The adequate
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-06
-
5. Plasma assisted parts' manufacturing: sintering and surface texturing - part I - influence of sintering time and temperature
The acquirements and potentiality universe of cleaning, heating and/or sputtering effects caused by plasma species bombardment phenomenon on the surface characteristics and finishing of manufactured parts treated in DC abnormal glow discharge opens a new research and development field, called here of Plasma Assisted Parts' Manufacturing (PAP'M). The adequate
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-06
-
6. Deposition of thin film of titanium on ceramic substrate using the discharge for hollow cathode for Al2O3/Al2O3 indirect brazing
Thin films of titanium were deposited onto Al2O3 substrate by hollow cathode discharge method for the formation of a ceramic-ceramic joint using indirect brazing method. An advantage of using this technique is that a relatively small amount of titanium is required for the metallization of the ceramic surface when compared with other conventional methods. Rap
Materials Research. Publicado em: 2009
-
7. Hollow cathode discharge: application of a deposition treatment in the iron sintering
The influence of a previous deposition treatment on the final amount of alloying elements (Cr and Ni) deposited and diffused into the surface of iron parts sintered in hollow cathode discharge (HCD) was studied. Cylindrical pure iron pressed samples, being a central cathode, were placed concentrically in the interior of an AISI 310 steel machine-made outer c
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2008-06
-
8. Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco
O sistema construído para caracterizar eletrodos e, conseqüentemente, filmes finos depositados é constituído por um cátodo oco que trabalha a altas e baixas pressões (aproximadamente 10-3 a 5 mbar), uma fonte DC (0 a 1200 V), uma câmara cilíndrica de borossilicato fechada por flanges de aço inox com uma associação de bombas de vácuo mecânica e d
Publicado em: 2008
-
9. Comparative study of porosity and pores morphology of unalloyed iron sintered in furnace and plasma reactor
Samples of unalloyed iron were sintered in the presence of an abnormal glow discharge using a confined anode-cathode configuration. The samples were placed on a holder acting as the discharge anode inside an AISI 1020 steel hollow cathode. Heating of the outer cathode was obtained by the bombardment of ions and energetic neutral particles. As a consequence o
Materials Research. Publicado em: 2007-03
-
10. Determinação do perfil térmico em amostras de aço AISI M35 imersas em plasma
The heat transfer between plasma and a solid occurs mostly due the radiation and the collision of the particles on the material surface, heating the material from the surface to the bulk. The thermal gradient inside the sample depends of the rate of particles collisions and thermal conductivity of the solid. In order to study that effect, samples of AISI M35
Publicado em: 2007
-
11. Integração de técnicas analíticas e proposta de experimentos para cursos de graduação em análise instrumental: uso de espectrômetro de absorção atômica para medidas de absorção molecular
Simple experiments are proposed for measuring molecular absorption of chromate and dichromate ions using an atomic absorption spectrometer. The experiments can help undergraduate students in instrumental analysis courses understand important aspects involving conceptual and instrumental similarities and differences between frequently used analytical techniqu
Química Nova. Publicado em: 2006-07
-
12. Hollow cathode magnetron deposition of AlN thin films: crystalline structure and morphology
A new dc hollow cathode plasma source has been assembled whith a conventional planar magnetron cathode used together with another plane cathode plate to form a hollow cathode cavity. The system comprises two cathode plates of aluminium separated by a distance d, one of them acting as target of the magnetron cathode, the other being an ordinary plate. The dis
Brazilian Journal of Physics. Publicado em: 2006-06