High Cutting Speed
Mostrando 1-12 de 48 artigos, teses e dissertações.
-
1. A Comparative Study of the Heat Input During Laser Welding of Aeronautical Aluminum Alloy AA6013-T4
ABSTRACT The heat input is the amount of energy supplied per unit length of the welded workpiece. In this study, the effect of two different heat inputs in laser beam welding of a high strength aluminum alloy AA6013-T4 was evaluated from macrostructural and microstructural points of view. The experiments were performed using a continuous wave 2 kW Yb-fiber l
J. Aerosp. Technol. Manag.. Publicado em: 14/06/2018
-
2. QUALITY OF MECHANICAL SOYBEAN HARVESTING AT TWO TRAVEL SPEEDS
ABSTRACT: Soybean harvesting is the last operation performed in the field and therefore has high added value. Quantitative losses during this process should therefore be minimized to achieve maximum quality and increase the sustainability of the production system. The aim of the present study was to determine and characterize the quantitative losses and oper
Eng. Agríc.. Publicado em: 2017-12
-
3. Investigation of High-Speed Cryogenic Machining Based on Finite Element Approach
Abstract The simulation of cryogenic machining process because of using a three-dimensional model and high process duration time in the finite element method, have been studied rarely. In this study, to overcome this limitation, a 2.5D finite element model using the commercial finite element software ABAQUS has been developed for the cryogenic machining proc
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
4. Analysis of the cutting conditions influence on the finish of hardened steels using high speed milling / Análise da influência das condições de corte sobre o fresamento em acabamento de aços endurecidos usando altas velocidades
Normalmente, a utilização de aços ferramenta endurecidos, juntamente com as formas complexas típicas das peças utilizadas na área de moldes e matrizes, oferecem dificuldade na usinagem por fresamento, principalmente nas operações de acabamento que exijam o uso de ferramentas longas. A técnica de fresamento HSM (High Speed Machining - usinagem em alt
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/02/2012
-
5. Estudo da influência da força de corte em usinagem a verde nas propriedades mecânicas de cerâmicas sinterizadas / Influence of the cutting force of green machining on the mechanical properties of sintered ceramics
The present study deals with the measurement forces of green machining ceramics and their correlation with the mechanical properties after sintering. The green machining is employed in crude compacts either to check raw formats without compromising the extreme dimensional accuracy or to obtain a preform prior to finish machining after sintering, extensively
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/01/2012
-
6. AVALIAÇÃO DA EFICIÊNCIA OPERACIONAL NA OPERAÇÃO DE COLHEITA MECANIZADA EM LAVOURAS DE ARROZ IRRIGADO / EVALUATION OF OPERATING EFFICIENCIES IN HARVESTING RICE FIELDS
The objective of this thesis was evaluate the efficiencies of the harvesting operation in rice fields, located in the region of Depressão Central do Rio Grande do Sul. As specific objectives, this study sought to determine and evaluate the following efficiencies: field, time, field pattern and cutter bar; to verify if there is difference between the areas w
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/03/2011
-
7. Estudo teórico da condução de calor e desenvolvimento de um sistema para a avaliação de fluidos de corte em usinagem / Theoretical study of heat conduction and development of a system for evaluation of cutting fluids in machining
Due to the rapid growth and development of machining processes there has been a demand for environmental sustainability and news cutting fluids have been applied. A reliable assessment of their efficiency in cooling the workpiece, tools and improving productivity is still a requirement. The present thesis presents a theoretical study and a proposal of a syst
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2011
-
8. Otimização do corte de pontas de um aço livre de intersticiais laminado a quente usando tesoura do tipo guilhotina / Optimization the cut edge of a hot rolled interstitial free steel using a guillotine type shearing machine
The automotive industry\ s demand for high formability steels for use in exposed body panels motivated the development of several interstitial free (IF) steels specifications at Companhia Siderurgica Nacional. The \"IF-Ti\" steel specification belongs to the special deep drawing steels group (CSN EEP-IF), with yield strength <380 MPa, and among all grades of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/02/2011
-
9. Análise dos deslocamentos térmicos de eixo-árvores de máquinas-ferramenta em altas rotações / ANALYSIS OF MECHANICAL AND THERMAL DISPLACEMENTS IN HIGH SPEED MACHINE TOOL SPINDLES
Machine tools play a key role in modern industrial production; therefore the technological development of machine tool industry has grown over the past decades. High Speed Machining (HSM) is widely used for machining complex and free form surfaces with high geometrical and dimensional accuracy. The spindle is one of the main items of a machine tool. Thus, it
Publicado em: 2011
-
10. Improvement of the productivity in getting holes in aviation aluminum alloys with high speed tools / Melhoria da produtividade na obtenção de furos em liga de aluminio aeronautico com ferramentas de aço rapido
The purpose of this study is to optimize the manufacturing process of holes made by Company X in one of their products. Besides the optimization, should be maintained the dimensional quality by controlling the diameter, roundness, circularity, and surface finish of cylindrical holes obtained by the widening process, with high-speed steel reamers in a aluminu
Publicado em: 2010
-
11. Modelos de simulação para análise e apoio à decisão nos processos de corte mecanizado, carregamento e transporte no agronegócio da cana-de-açúcar / Simulation models for analysis and decision support in the processes of cutting, loading and transport in the agribusiness of cane sugar
In the current days sugarcane occupies an area of approximately 10,5 % of all the Brazilian agricultural land, with an estimated production for the 2008/2009 crop of 528 million t. In the sugarcane production process, the harvest highlights due its high costs, representing approximately 35% of the sugarcane production costs, besides the addition of operation
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/07/2009
-
12. Performance evaluation of carbide tools on automotive valve guides reaming / Avaliação do desempenho de ferramentas de metal duro no alargamento de guias de válvulas automotivas
Reaming is a machining process with relatively low cost and suitable when high quality holes are required. The purpose of this work is to evaluate the quality of the holes made in automotive valve guides, fabricated with sintered steel. This study was based on parameters of surface roughness, roundness and cylindricity deviations, obtained with uncoated carb
Publicado em: 2009