Heating Treatment
Mostrando 1-12 de 359 artigos, teses e dissertações.
-
1. An alternative energy generation from charcoal produced from Brazilian pine (Araucaria angustifolia (Bert.) O. Ktze) seed residues
The perspective is that the energy demand will grow in the coming decades worldwide. The search for renewable energy sources is urgent and necessary. Residual biomass may be a promising source of raw material for obtaining bioenergy. Thus, this research sought to evaluate the energetic and physicochemical properties of residues from the seeds of Brazilian pi
Química Nova. Publicado em: 2022
-
2. Comparative study of inclusion removal from liquid steel in the RH and argon purging processes
Abstract In order to improve steel quality, it is necessary to increase the cleanliness of the liquid steel; that is, to reduce the number and size of the inclusions in the liquid steel, as well as to control their chemical composition. For this purpose, processes (with different operating costs) are used, such as the bubbling of inert gas in the steel ladle
REM, Int. Eng. J.. Publicado em: 2020-09
-
3. Two Years Monitoring of Ethyl Carbamate in Sugar Cane Spirit from Brazilian Distilleries
This paper describes the monitoring of ethyl carbamate concentration in sugar cane spirit from industrial distilleries in Brazil. In total, 18 distilleries from Minas Gerais and São Paulo states were evaluated, with, a total of 336 samples from August 2017 to August 2019. The ethyl carbamate was analyzed using a previously validated mass spectrometric metho
J. Braz. Chem. Soc.. Publicado em: 2020-07
-
4. Assessment of Reaction Parameters in the Polymeric Carbon Nitride Thermal Synthesis and the Influence in Photocatalytic Hydrogen Production
In this work, the reaction parameters for polymeric carbon nitride synthesis by thermal polycondensation were assessed, such as type of precursor, heating rate and time of thermal treatment, in order to obtain crystalline materials with high photocatalytic performance. All synthesized materials were tested as photocatalysts in hydrogen production using ethyl
J. Braz. Chem. Soc.. Publicado em: 2020-05
-
5. Acrylamide reduces plasma antioxidant vitamin levels in rats due to increased oxidative damage
RESUMO Objetivo A acrilamida é um químico potencialmente neurotóxico e carcinogênico, sendo naturalmente criada durante o processo de aquecimento de alimentos ricos em carboidratos, como batatas fritas e cereais matinais. Dado que o composto pode ser ingerido através do consumo de alimentos, o presente trabalho teve por objetivo investigar o seu efeito
Rev. Nutr.. Publicado em: 17/01/2020
-
6. The Surface Treatment of Niobium Superconducting Reentrant Cavities by Means of High Temperature Nitrogen Plasma Based Ion Implantation
High Temperature Nitrogen Plasma Based Ion Implantation (HT-NPBII) has been used to treat the surface of niobium superconducting reentrant cavities, which are part of parametric transducers in a resonant-mass gravitational wave detector. The aim is to enhance the corresponding electrical quality factors (Q-factors) which are closely related with the increase
Mat. Res.. Publicado em: 13/12/2019
-
7. Assessment of sulfamethoxazole adsorption capacity on Pirangi clay from the State of Sergipe, Brazil, modified by heating and addition of organic cation
Resumo O sulfametoxazol (SMX) é um antibiótico amplamente usado no tratamento de doenças e infecções e é frequentemente detectado em ecossistema de águas superficiais. Assim, este trabalho avaliou a capacidade de remoção deste antibiótico de sistemas aquosos utilizando argila Pirangi (PIR) do estado de Sergipe (Brasil). Amostras de argila Pirangi f
Cerâmica. Publicado em: 14/11/2019
-
8. Different effects of heating and freezing treatments on the antioxidant properties of broccoli, cauliflower, garlic and onion. An experimental in vitro study
ABSTRACT BACKGROUND: Vegetables have some beneficial effects on human health due to their antioxidant compounds, like polyphenols. Cooking leads to many physical and chemical changes to plant structure that can alter the phytochemical compounds of vegetables. OBJECTIVES: To investigate the effects of heat treatment and freezing on the antioxidant propert
Sao Paulo Med. J.. Publicado em: 07/11/2019
-
9. Influence of Molybdenum on Microstructure and Pitting Corrosion Behavior of Solution-Treated Duplex Stainless Steel in a Lithium Chloride Solution
With technological advances in the several areas of knowledge, the constant search for materials with characteristics that meet certain applications has been growing, especially in the chemical and petrochemical industries, where materials capable of withstanding the conditions of corrosion in aggressive environments are required. The aim of this paper was t
Mat. Res.. Publicado em: 24/10/2019
-
10. Evaluation of the Acid Baking Technique to Decrease the Phosphorus Content of the Iron Ore
Unlike the available mineral resources, the steelmaking processes have demanded raw material with lower phosphorus content to decrease the costs, energy use, and the residue generated within the steel plant. One alternative is to develop pretreatment of the iron ore concentrates producing raw materials with lower phosphorus. Depending on the mineral structur
Mat. Res.. Publicado em: 23/09/2019
-
11. Efeito da Taxa de Resfriamento na Liga Ni80Cu20 via Dinâmica Molecular
RESUMO A simulação em Dinâmica Molecular (MD) é uma poderosa ferramenta para estudo de ligas amorfas nanométricas. Neste artigo, a MD foi empregada para o estudo da liga Ni80Cu20. As simulações foram realizadas com o código livre LAMMPS, em um sistema contendo 2.000 átomos com interação atômica dada pelo potencial de Finnis-Sinclair (EAM-FS). O a
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Influence of Processing Variables on Clay-Based Ceramic Formulations
The properties of ceramic materials and microstructural changes are dependent on the raw materials from which they are made and on the manner in which they are processed, from the composition to the established thermal treatment, heating rate, and firing temperature. In this study, the influence of some processing parameters (formulation, maturation time, an
Mat. Res.. Publicado em: 11/03/2019