Gtaw
Mostrando 1-12 de 66 artigos, teses e dissertações.
-
1. Contributions of the High Frequency Dynamic Wire Feeding in the GTAW Process for Increased Robustness
Abstract: The GTAW process is recognized as a process of high metallurgical quality, being widely used in the pipelines welding, mainly in the root pass. The relative independence between the heat delivered to the melting pool and the amount of material added helps to control the melting of the material and to avoid the appearance of welding discontinuities
Soldag. insp.. Publicado em: 02/12/2019
-
2. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
3. Influence of Nb Content on Sensitization and Pitting Corrosion of Welded AISI 430 Ferritic Stainless Steel
Resumo Neste trabalho, o efeito da adição de Nb na sensitização e corrosão por pite de aço inoxidável ferrítico AISI 430 submetido à soldagem TIG foi investigado por caracterização microestrutural e técnicas eletroquímicas. As três regiões distintas do processo de soldagem, zona fundida, zona termicamente afetada e metal de base do aço AISI
Soldag. insp.. Publicado em: 07/10/2019
-
4. Keyhole GTAW with Dynamic Wire Feeding Applied to Orbital Welding of 304L SS Pipes
Resumo Atualmente, no cenário brasileiro de óleo e gás a execução dos processos de soldagem para aços inoxidáveis consiste em sua grande maioria de aplicações manuais, dificultando qualquer aumento de produtividade e repetibilidade dos processos. Portanto, a automação desta etapa permite grandes avanços com resultados mais confiáveis, menores c
Soldag. insp.. Publicado em: 15/08/2019
-
5. Performance of the INCONEL 625 alloy weld overlay obtained by FCAW process
ABSTRACT Nickel-based weld overlays (cladding) are commonly used in oil & gas industry to extend the life of equipment under corrosive environment, as it improves the corrosion resistance without a significant increase in the manufacturing cost, when compared to a full nickel-based alloy equipment. Although there are extensive literature involving overlays a
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Nickel-Titanium Alloys Welding of Thin Sheets Using GTAW: Comparative Study Between Similar and Dissimilar Welding with AISI 304 Stainless Steel
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the Gas Tungsten Arc Welding (GTAW) process and to study the mechanical and metallurgical properties of the joints with and without post-welding heat treatment (PWHT). The GTAW process was chose
Mat. Res.. Publicado em: 08/11/2018
-
7. Efecto del tiempo de superpulso de soldadura sobre la evolución microestructural de un acero de bajo carbono
ABSTRACT The Super Pulse arc type was developed to provide a solution to butt root pass beads in the semi-automatic welding process with gas protection (GMAW). Unlike standard pulse welding, the Super Pulse uses a sequence of different pulse waveforms to create a cord shape and appearance similar to the GTAW process. It uses higher amperage in the primary ph
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Análise da Influência de Parâmetros de Soldagem em Características Microestruturais e Mecânicas de Juntas Soldadas de um Tubo de Aço API X70Q para Aplicação Sour Service
Resumo O aço X70 é um material que possui boa relação entre resistência mecânica e tenacidade, sendo um grau bastante utilizado em condução/transporte de óleo e gás. Com o objetivo de avaliar a soldabilidade deste material, características microestruturais e mecânicas foram avaliadas ao longo da seção transversal de juntas obtidas por soldage
Soldag. insp.. Publicado em: 10/07/2018
-
9. Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
ABSTRACT AISI 430 is a non-stabilized ferritic stainless steel grade with carbon content lower than 0.12%.After hot and cold rolling this material is annealed. The slow cooling after soaking at temperatures between 900oC and 1000oC promotes the formation of a high quantity of carbides and nitrides, while the rapid cooling partially suppresses the formation o
Matéria (Rio J.). Publicado em: 08/01/2018
-
10. Effects of Aging at 450°C on the Pitting Corrosion Resistance and Toughness of AISI 317L Steel Welded by GTAW and FSW
Austenitic stainless steels are high corrosion resistant alloys widely used in many industrial fields. Among this family of steels, AISI 317L stands out due to its higher localized corrosion resistance when compared to the traditional grades AISI 304L and AISI 316L. In some applications in oil refineries, the AISI 317L is being specified for services at mode
Mat. Res.. Publicado em: 17/11/2017
-
11. Efeito do Arrefecimento Causado pelo Fluido Durante a Soldagem em Operação em Tubulações com Espessura de Parede de 6 e 11 mm
Resumo Este trabalho compara a influência do arrefecimento causado por um fluído em circulação e em contato com a parede interna de uma tubulação, que caracteriza a soldagem em operação. Foram avaliadas duas espessuras de parede do tubo e duas temperaturas do fluido interno. A soldagem foi realizada na ligação de conexões de aço ASTM A105 a um tu
Soldag. insp.. Publicado em: 2017-09
-
12. Avaliação microestrutural de um aço de baixo carbono submetido ao tratamento de boretação pré e pós-soldagem GTAW
RESUMO Os estudos na área da engenharia de superfícies recebem grande importância devido ao aprimoramento que as modificações superficiais fornecem aos materiais. Com um mercado global que tem a necessidade de proporcionar às peças e equipamentos maior vida útil com baixo custo, para suportar solicitações severas e assim manter seu alto desempenho,
Matéria (Rio J.). Publicado em: 01/06/2017