Green Machining
Mostrando 1-5 de 5 artigos, teses e dissertações.
-
1. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
2. Estudo da influência da força de corte em usinagem a verde nas propriedades mecânicas de cerâmicas sinterizadas / Influence of the cutting force of green machining on the mechanical properties of sintered ceramics
The present study deals with the measurement forces of green machining ceramics and their correlation with the mechanical properties after sintering. The green machining is employed in crude compacts either to check raw formats without compromising the extreme dimensional accuracy or to obtain a preform prior to finish machining after sintering, extensively
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/01/2012
-
3. Study on the behavior of the minimum quantity lubricant - MQL technique under different lubricating and cooling conditions when grinding ABNT 4340 steel
Energy consumption, air pollution and industrial waste have received special attention from public authorities in recent years. The environment has become one of the most important subjects in the context of modern life, for its deterioration impacts the quality of life populations. Driven by pressure from environmental agencies, politicians have drawn up ev
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2005-06
-
4. Complex-shaped ceramic composites obtained by machining compact polymer-filler mixtures
Research in the preparation of ceramics from polymeric precursors is giving rise to increased interest in ceramic technology because it allows the use of several promising polymer forming techniques. In this work ceramic composite pieces were obtained by pyrolysis of a compacted mixture of a polysiloxane resin and alumina/silicon powder. The mixture consists
Materials Research. Publicado em: 2005-06
-
5. Projeto e fabricação de moldes para prensagem isostática utilizando tecnologias CAD/CAE e prototipagem rápida. / Design and manufacturing of moulds in isostatic pressing using CAD/CAE technology and rapid prototyping.
This work presents a methodology for the design and fabrication of ceramic powder isostatic pressing moulds using CAD and CAE tools and Rapid Prototyping. The isostatic pressing process was simulated using the finite element method. The compaction behavior of ceramic powder is described by the Drucker-Prager/cap constitutive model and the behavior of elastom
Publicado em: 2002