Grazing Incidence
Mostrando 1-12 de 35 artigos, teses e dissertações.
-
1. Changing the characteristics of the nitrided layer using three different plasma configurations
ABSTRACT Direct current (DC) plasma nitriding offers some disadvantages, especially in parts with complex geometries, where the presence of edges is significant, such as gears, molds, and needle punched parts are strongly affected by this effect, leading to irregular formation of nitrided layers and high variation in surface hardness. To solve these problems
Matéria (Rio J.). Publicado em: 10/06/2019
-
2. The influence of nitrogen to hydrogen ratio and temperature on thickness and phase composition in plasma nitrided Ti-6Al-4V
ABSTRACT Ti-6Al-4V was plasma nitrided using several N2/H2 ratios and substrate temperatures. In order to investigate the combined influence of these parameters on phase composition and thickness of the coatings, the phases in the as received, annealed, and nitrided Ti-6Al-4V samples were identified with Rietveld refinement. In the as-received and annealed s
Matéria (Rio J.). Publicado em: 20/05/2019
-
3. Recubrimientos porosos de dióxido de titanio sintetizados por oxidación anódica
ABSTRACT Titanium dioxide is one of the most used materials in heterogeneous photocatalysis due to its commercial availability, low cost, chemical stability, low toxicity and high photocatalytic activity. One of the most efficient and economical methods to obtain TiO2 coatings is the plasma electrolytic oxidation. In this anodization process, a direct curren
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Local piezo-response for lead-free Ba0.9Ca0.1Ti0.9Zr0.1O3 electro-ceramic by switching spectroscopy
The purpose of this work is to determine the effective piezoelectric coefficient (d33) and the macro ferroelectric hysteresis behavior for the Ba0.9Ca0.1Ti0.9Zr0.1O3 (BCZT). The sample was prepared by the modified Pechini method and it was sintered at 1250 ºC for 5 h. The refinements of X-ray diffraction (XRD) patterns obtained by the Rietveld method sugges
Mat. Res.. Publicado em: 11/01/2018
-
5. Ionic Oxidation in Cathodic Cage of Titanium CP Grade II
Titanium oxides such as rutile and anatase, are materials that stand out for exhibiting properties that act in biomedical and photocatalytic applications, among others. It is extreme importance to idealize new techniques that produce such compounds, being indispensable the improvement of characterizations for these materials. For this purpose, titanium comer
Mat. Res.. Publicado em: 24/08/2017
-
6. Reflection and Refraction of Waves at the Boundary of a Non-Viscous Porous Solid Saturated with Single Fluid and a Porous Solid Saturated with Two Immiscible Fluids
Abstract The phenomenon of reflection and refraction is studied at the welded interface between two different porous solids. One is saturated with single non-viscous fluid and other is saturated with two immiscible viscous fluids. The incidence of Pf, Ps or SV wave through porous solid saturated with non-viscous fluid results in the three reflected waves and
Lat. Am. j. solids struct.. Publicado em: 2016-07
-
7. Influence of Temperature and Acid Etching Time on the Superficial Characteristics of Ti
AbstractWe evaluated the influence of the etching time and temperature of an acid solution (HCl/H2SO4) on the chemical and topographical superficial characteristics of cpTi grade IV. Samples were analyzed by electron microscopy, interferometry, and grazing incidence XRD. The surfaces kept the irregularity aspect when submitted to the same etching temperature
Mat. Res.. Publicado em: 2015-10
-
8. Effect of Low Temperature Nitriding of 100Cr6 Substrates on TiN Coatings Deposited by IBAD
In this paper we studied the influence of pre-treating the surface of 100Cr6 steel by ion beam nitriding at low temperature (380°C) on the surface topography and wear resistance of thin TiN coatings deposited by reactive ion beam assisted deposition. The specimens were characterized by grazing incidence X-ray diffraction, scanning electron microscopy and at
Mat. Res.. Publicado em: 2015-02
-
9. Characterization of TiCN thin films deposited by Dc-Pulsed PACVD using methane precursor
Titanium carbonitride (TiCN) thin films were deposited on hot-work steel (DIN 1.2606) by plasma-assisted chemical vapor deposition (PACVD) and the influence of different CH4/ (CH4+N2) gas flow ratio, on the layer mechanical properties, were investigated. SEM studies indicated that the growth rate is decreased by increasing the CH4/ (CH4+N2) gas flow ratio. I
Mat. Res.. Publicado em: 2014-12
-
10. Innovative low temperature plasma approach for deposition of alumina films
Alumina films were deposited from a new plasma method using aluminum acetylacetonate (AAA) powder as precursor. The AAA was sputtered in argon and oxygen plasma mixtures. It was investigated the effect of the oxygen proportion (O2%) on the properties of the coatings. Deposition rate was derived from the layer height measured by profilometry. The elemental co
Mat. Res.. Publicado em: 2014-12
-
11. Study of the influence of acid etching treatments on the superficial characteristics of Ti
Modifications in texture and surface chemistry are commonly used to increase the biologic response to implants. We evaluated the influence of five different acid etching treatments on the chemical and topographical superficial characteristics of cpTi grade IV discs (test groups). One group of samples were only polished (control group). The samples were analy
Mat. Res.. Publicado em: 01/04/2014
-
12. Forage yield and nutritive value of Panicum maximum genotypes in the Brazilian savannah
The narrow genetic variability of grasslands and the incidence of new biotic and abiotic stresses have motivated the selection of new Panicum maximum genotypes for use as forage for beef cattle in the Brazilian savannah. This study aimed to evaluate forage yield and nutritive value of P. maximum genotypes including 14 accessions (PM30 to PM43), four intraspe
Sci. agric. (Piracicaba, Braz.). Publicado em: 2014-02