Graphite Furnace
Mostrando 1-12 de 98 artigos, teses e dissertações.
-
1. Simple Spectrophotometric Determination of Iron in Diesel Oil after Sample Preparation Employing Extraction Induced by Emulsion Breaking
This work reports the development of a simple and fast method for the spectrophotometric determination of Fe in diesel oil using the classic reaction with 1,10-phenanthroline after its extraction induced by emulsion breaking (EIEB). The extraction parameters of EIEB were optimized (concentration of HNO3 and Triton X-100® in the emulsifying solution) as well
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Dispersive Solid-Phase Extraction Using 3-Mercaptopropyltrimethoxysilane Functionalized Magnetic MWCNT-Based Nanocomposite for Selective and Efficient Preconcentration of Pb2+ with FAAS Determination
A novel nanocomposite based on magnetic multiwalled carbon nanotubes coated with SiO2 and functionalized with 3-mercaptopropyltrimethoxysilane (3-MPTMS) was prepared for the efficient extraction and quantification of lead ions from water samples. The adsorption capacity of this adsorbent could reach 1.995 mg g-1 Pb2+ in an equilibrium time of 30 min. Under o
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Development of a Methodology Based on Extraction Induced by Emulsion Breaking for Copper Determination in Gasohol by Graphite Furnace Atomic Absorption Spectrometry
The development of a method based on extraction induced by emulsion breaking (EIEB) aiming copper determination in gasohol using graphite furnace atomic absorption spectrometry (GF AAS) is reported. Emulsification of the gasohol samples was carried out using nitric acid solution, (1,1,3,3-tetramethylbutyl)phenyl-polyethylene glycol surfactant (Triton X-114),
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
4. AVALIAÇÃO DE NANOTUBOS DE CARBONO FUNCIONALIZADOS VISANDO O DESENVOLVIMENTO DE MÉTODOS DE PRÉ-CONCENTRAÇÃO DE ÍONS METÁLICOS E DETERMINAÇÃO POR TÉCNICAS ESPECTROMÉTRICAS E ELETROANALÍTICAS
This review focuses on the use of functionalized carbon nanotubes (CNTs) on the development of preconcentration methods with substantial contributions on selectivity and sensitivity for metal ions determination. CNTs have been usually employed in the development of preconcentration/speciation coupled to spectroanalytical techniques for ions determination at
Quím. Nova. Publicado em: 2020-09
-
5. Determination of Copper and Cadmium in Petroleum Produced Formation Water by Electrothermal Atomic Absorption Spectrometry after Cloud Point Extraction
Cloud point extraction (CPE) in association with graphite furnace atomic absorption spectrometry (GF AAS) was proposed for preconcentration and quantification of trace amounts of copper and cadmium in samples of saline produced formation water from petroleum exploration. The procedure was based on the formation of hydrophobic complexes of the analytes with 1
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
6. Simple GFAAS Method for Determination of Pb, As, and Cd in Cannabidiol Extracts Used for Therapeutic Purposes
Cannabis sativa has many promising medicinal applications for the mitigation, or even cure, of chronic diseases. The high bioaccumulation potential of C. sativa enables its use for the phytoremediation and detoxification of soil, may increase the levels of inorganic elements in products such as cannabidiol (CBD) extracts being necessary the evaluation/monito
J. Braz. Chem. Soc.. Publicado em: 2020-05
-
7. Spatial pattern of the environmental exposure to tin in the vicinity of an alloy industry in Volta Redonda, Rio de Janeiro State, Brazil
Resumo: O estanho é amplamente utilizado na indústria. A literatura sobre seus efeitos em humanos é escassa, principalmente quanto aos valores de referência em indicadores biológicos como sangue e urina. Também são raros os estudos sobre os limites do estanho no meio ambiente. O estudo teve como objetivo avaliar os pontos críticos da distribuição e
Cad. Saúde Pública. Publicado em: 14/10/2019
-
8. Assessment of Trace Element Contents in Soils and Water from Cerrado Wetlands, Triângulo Mineiro Region
ABSTRACT In the Brazilian Cerrado biome, there are wetlands locally known as “Veredas”, which are swampy plains between hills and rivers. Since the 1970’s, the Cerrado biome has been gradually converted to livestock, crop, or forestry production. Until now, very few studies were conducted to evaluate the baseline contents of trace elements in Cerrado w
Rev. Bras. Ciênc. Solo. Publicado em: 29/04/2019
-
9. Calibration of high-temperature furnace assemblies for experiments between 200 and 600 MPa with end-loaded piston-cylinder apparatuses
Abstract We present pressure calibration results for piston-cylinder –” and 1” high temperature furnace assemblies in the 200-600 MPa range aiming to expand its applicability to simulate upper crustal conditions. The furnace assemblies were made up by crushable MgO, graphite heater, pyrex glass spacer, and NaCl sleeve. Twenty-one experiments were carri
Braz. J. Geol.. Publicado em: 15/04/2019
-
10. Synthesis of Graphene Oxide and Functionalized CNT Nanocomposites Based on Epoxy Resin
ABSTRACT Lately, nanomaterials have been largely studied as reinforcements for epoxy resin. Although their usage is highly promising, the literature has reported some drawbacks regarding the improvement of mechanical properties in nanocomposites. These difficulties are usually due to dispersion of nanomaterials and its adhesion to the polymeric matrix. One a
J. Aerosp. Technol. Manag.. Publicado em: 16/07/2018
-
11. Copper/Iron Brake Friction for Military Aircraft Application
ABSTRACT: The present study assesses the influence of non-metallic constituents and manufacturing parameters, such as compaction pressure and sintering temperature, to produce a metal matrix composite (MMC) of copper/iron, based on the brake disc of aircraft AT-29 SuperTucano. The samples were produced with six different compositions, by varying the amount o
J. Aerosp. Technol. Manag.. Publicado em: 03/05/2018
-
12. CORRELAÇÕES GEOQUÍMICAS ENTRE AMOSTRAS DE PETRÓLEO DA BACIA POTIGUAR E DEFINIÇÃO DE SUAS POSSÍVEIS ROCHAS GERADORAS
Eight petroleum samples from Potiguar Basin were submitted for determination of saturated biomarkers by gas chromatography (fingerprint), liquid chromatography (saturates, aromatics, resins and asphaltenes), gas chromatography-mass spectrometry (GC-MS), nickel and vanadium by high resolution continuum source graphite furnace atomic absorption spectrometry (H
Quím. Nova. Publicado em: 2018-04