Furnaces
Mostrando 1-12 de 63 artigos, teses e dissertações.
-
1. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
2. Analysis of cracks and coating in iron ore pellets by digital image processing
Abstract The pelletizing process agglomerates ore fines previously considered as tailings and makes its application possible in the form of pellets. During the process, the pellets are subjected to various compressive forces and temperature changes, which cause ruptures in their surface. These ruptures (cracks) impair the performance of the pellets in the re
REM, Int. Eng. J.. Publicado em: 2020-09
-
3. Discrimination of pores and cracks in iron ore pellets using deep learning neural networks
Abstract The discrimination between pores and cracks is an important step in the microstructural analysis of iron ore pellets. While the porosity is fundamental during the reduction process in blast furnaces, cracks are strongly detrimental to the mechanical strength. The usual image processing tools cannot automatically discriminate between these two types
REM, Int. Eng. J.. Publicado em: 2020-06
-
4. Análise do desempenho de adensamento da massa refratária de sílica usada em fornos de indução
Resumo As indústrias de fundição de ferro fundido usam em seu processo grande quantidade de sucata zincada, o que tem contribuído para a redução da campanha do revestimento refratário de fornos de indução a cadinho já que o vapor de zinco formado no aquecimento migra para o centro do refratário, condensando em regiões externas do forno, próximo
Cerâmica. Publicado em: 14/11/2019
-
5. Mechanical strength of briquettes for use in blast furnaces
Abstract The demand for sustainable materials in the steel industry and the search for alternatives for the traditional ferriferous burdens utilized in siderurgy stimulated the development of this research. The briquetting process is a usual measure taken for recycling materials such as ironmaking waste (dust and sludge from blast furnaces), which can be reu
REM, Int. Eng. J.. Publicado em: 2019-03
-
6. Selection of materials for blast furnace injection using quality indicators
Abstract The injection of pulverized materials is a technique used in most of the blast furnaces in the world to reduce coke and charcoal consumption. In addition, injection is one of the main variables of the blast furnace heat control. Coal is the most used material for the injection, but some industries have been attempting to use other materials, usually
REM, Int. Eng. J.. Publicado em: 2019-03
-
7. MONITORING OF TRANSPORTATION NETWORK OF CARBONIZATION GASES IN COGENERATION PROJECTS
RESUMO O objetivo desse trabalho foi avaliar o desempenho e a eficiência de um sistema de transporte de gases da carbonização até um queimador. O sistema de transporte de gases da carbonização consiste na retirada destes da chaminé dos fornos, os quais passam por tubulações até atingirem o queimador. Para evitar a condensação dos gases e geraçã
Rev. Árvore. Publicado em: 11/02/2019
-
8. Novel Drying Process Assisted by Microwave to Iron Ore Pelletizing
Drying has became critical to iron ore pellet production, due to increasing inability to withdrawal moisture from the green pellets, especially faced by goethitic iron ore producers. Most of the existing pelletizing furnaces do not support increase heating rates nor changes in furnaces length, without compromise pellet quality. The present study evaluates an
Mat. Res.. Publicado em: 06/09/2018
-
9. Aspectos de la formación de polvo volátil en la industria del cobre primario
ABSTRACT In addition to the production of primary copper and ferro silicate slag, the formation of significant amounts of flue dust plays an increasingly important role in today’s copper industry. While valuable elements such as copper and precious metals primarily remain in the heavier, denser products, others such as zinc and lead preferably accumulate i
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Carbothermic reduction of Electric Arc Furnace Dust via thermogravimetry
Abstract Electric Arc Furnace Dust (EAFD) is a solid waste originated from electric steelmaking furnaces. Currently, according to some authors, there is an estimated generation of 15 to 25 kg of dust per ton of steel produced. The formation of the dust is related to the following steps of the process: furnace charge, metal volatilization, iron vaporization u
REM, Int. Eng. J.. Publicado em: 2018-07
-
11. Impact of operational parameters on fuel consumption of a blast furnace
Abstract Process analyses foster opportunities for identifying losses during the production process and consequently, provide courses of action to enhance the process with operational parameters that are compatible with the targeted results. In this study, a thermochemical model was developed in order to monitor the performance of coke-based blast furnaces,
REM, Int. Eng. J.. Publicado em: 2017-12
-
12. Convective recirculation effect on the selective non-catalytic reduction behavior in an industrial furnace
Abstract Selective non-catalytic reduction (SNCR) has become an important technique for reducing NOx emissions in industrial furnaces. The occurrence of convective recirculation can cause significant changes in SNCR performance. This paper presents the results of a study performed by Computational Fluid Dynamics (CFD) considering: (i) changes of initial NOX;
Braz. J. Chem. Eng.. Publicado em: 2017-10