Friction
Mostrando 13-24 de 620 artigos, teses e dissertações.
-
13. Simulação de condição de fluxo em duto circular transportando polpa de bauxita de Paragominas (PA) na presença de aditivo modificador de viscosidade
RESUMO Sistemas de bombeamento de minérios por dutos tem atraído o interesse de mineradoras pois se tornam uma alternativa de transporte muito eficiente. Dentre os maiores desafios no projeto de bombeamento por dutos está a estimativa do fator de atrito, já que são muitas as variáveis que afetam este parâmetro. Uma amostra de polpa de bauxita de Parag
Matéria (Rio J.). Publicado em: 25/11/2019
-
14. Thermal Dissipation Effect on Temperature-controlled Friction Stir Welding
Resumo Durante a Soldagem por Fricção linear (FSW) de geometrias complexas, a dissipação térmica, induzida por características geométricas ou pelo ambiente circundante, desempenha um papel importante na qualidade final da junta. Para garantir uma qualidade consistente em condições diferentes é necessário a adaptacão de parâmetros durante o proce
Soldag. insp.. Publicado em: 25/11/2019
-
15. Avaliação tribológica de óleos hidráulicos biodegradável e mineral com deslizamento entre as ligas de Cu-Zn e WC-CoCr
RESUMO A correta seleção dos óleos lubrificantes e das superfícies de contato melhoram o desempenho e reduzem o consumo de energia das máquinas Por isso, a engenharia de superfícies propõe novos revestimentos aos quais seu comportamento tribológico combinado com o uso de óleos biodegradáveis em componentes de sistema hidráulicos, não são conheci
Matéria (Rio J.). Publicado em: 25/11/2019
-
16. Forças no sistema de referência acelerado de um pêndulo: estudo teórico e resultados experimentais
Resumo Neste trabalho realizamos, inicialmente, uma discussão teórica sobre as forças no sistema de referência acelerado de um pêndulo que oscila livre de resistência. Tal discussão propicia a afirmação de que, se um acelerômetro for fixado no centro de oscilação de um pêndulo, ele deverá registrar um valor variável sobre o eixo orientado radi
Rev. Bras. Ensino Fís.. Publicado em: 25/11/2019
-
17. The Effects of Friction Coefficient on Formability Behaviour of Dual Phase Steel
The effects of friction coefficient on formability behavior of advanced high-strength steel sheets have been examined in this study. For this purpose, forming analysis has been conducted by stretching the three different steel sheets such as DP600, DP800 and DP1000. Forming processes have been done by using punch that has different friction coefficients (0.0
Mat. Res.. Publicado em: 14/11/2019
-
18. Flexure Based Energy Dissipating Device in Self-Centering Braces
Abstract Self-centering braces, in the current stage of development can accommodate large deformation and force levels. However, there is still a need for improvement of the energy dissipation mechanisms commonly incorporated in these braces. Yield based energy dissipation systems can overcome some of the problems faced with friction-based devices, such as s
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
19. Hand hygiene: knowledge and skill of caregivers in the hematopoietic stem cell transplantation
RESUMO Objetivo: identificar o conhecimento e habilidade de cuidadores sobre higiene das mãos no transplante de células-tronco hematopoéticas. Método: estudo transversal prospectivo. Utilizou-se questionário para identificar o conhecimento e foi observada a execução da técnica de higienização. Os dados foram coletados em duas unidades (transplant
Rev. Bras. Enferm.. Publicado em: 21/10/2019
-
20. Driving upside-down in a circular track
Abstract In this article, we point out an interesting solution for the dynamics of a racecar in a banked circular track with banking angle well over 90°. We call this track configuration an Inverted Track, at which a racecar can drive partially upside-down. We show an experimental setup, where we made a toy car to circulate upside-down held only by its fric
Rev. Bras. Ensino Fís.. Publicado em: 30/09/2019
-
21. PREDICTION OF COAL SLURRY PIPELINE TRANSPORTATION GRADING REDUCTION AND ITS INFLUENCE ON PIPE TRANSPORTATION PARAMETERS
Abstract Coal slurry pipe, being a new type of energy transportation mode, changes of the particle composition and the effect on other parameters are worth studying. Comparison of ring tube test measured data and batch grinding model simulation data shows that batch grinding model can predict the coal particle gradation to a certain extent. The effect of col
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
22. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
23. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 16/09/2019
-
24. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019