Flexural Stiffness
Mostrando 1-12 de 37 artigos, teses e dissertações.
-
1. Experimental study of reinforced masonry beams
Resumo Com objetivo de contribuir com o melhor entendimento do comportamento de vigas de alvenaria estrutural armada, foi realizado o estudo experimental de vigas de alvenaria armada com blocos de concreto. Essas foram projetadas para ruptura à flexão, sendo analisando o modo de fissuração, a flecha, o momento fletor último, a deformação por encurtame
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
2. Structural models for analysis of reinforced concrete frame buildings with masonry infills
Resumo Este trabalho tem como objetivo o estudo do comportamento de pórticos de edifícios de concreto armado preenchidos com alvenaria frente às ações horizontais, empregando-se dois modelos estruturais: i) modelo de diagonal equivalente (MDE) e ii) modelo com elementos finitos bidimensionais para estado plano de tensões (MEF). No primeiro modelo, a al
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
3. Flexure Based Energy Dissipating Device in Self-Centering Braces
Abstract Self-centering braces, in the current stage of development can accommodate large deformation and force levels. However, there is still a need for improvement of the energy dissipation mechanisms commonly incorporated in these braces. Yield based energy dissipation systems can overcome some of the problems faced with friction-based devices, such as s
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
4. Analytical determination of the vibration frequencies and buckling loads of slender reinforced concrete towers
Abstract This study focused on improving the design of slender structures with reinforced concrete (RC) telecommunication towers as the main application. Analytical procedure based on Rayleigh’s method to compute the first natural vibration frequency and the critical buckling load was development. All the nonlinearities present in the system were considere
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
5. Hybrid Sandwich Particleboard Made with Sugarcane, Pínus Taeda Thermally Treated and Malva Fibre from Amazon
A multilayer particleboard panels, consisted of sugarcane bagasse reinforced composite as core material and hybrid composites made with Pinus taeda particles and Malva fibres as facing materials, were designed and evaluated in this work. Tukey test was used to identify the effect of the facing material, considering different combinations of Pinus taeda parti
Mat. Res.. Publicado em: 18/12/2017
-
6. Electrical, Thermal and Mechanical Properties of Epoxy/CNT/Calcium Carbonate Nanocomposites
Epoxy/CNT and epoxy/CNT/calcium carbonate nanocomposites were produced via in situ polymerization assisted by ultrasonication without solvent and electrical, mechanical, thermal and thermomechanical properties of nanocomposites were evaluated. Epoxy/CNT presented very low percolation threshold, near 0.05 wt % and nanocomposites with higher contents of CNT pr
Mat. Res.. Publicado em: 04/12/2017
-
7. Layer-by-Layer technique employed to construct multitask interfaces in polymer composites
Abstract The properties of glass fiber-reinforced polymer composites are closely related to the fiber-matrix interface. Interfacial treatments to improve mechanical properties are usually limited to enhance interfacial adhesion. In this work, Layer-by-Layer (LbL) technique was introduced to build a novel interface in polymer composites. Different numbers of
Polímeros. Publicado em: 2017-12
-
8. Hybrid composites reinforced with short sisal fibres and micro ceramic particles
ABSTRACT Biocomposites reinforced with natural fibres have been extensively investigated as a promising replacing material for synthetic ones, such as the glass fibre reinforced composites. The length of natural fibres depends not only on the plant species, but also on the extraction processing. The heterogeneity of natural fibres, in terms of length, can be
Matéria (Rio J.). Publicado em: 20/07/2017
-
9. Mechanical Properties of Glass Fiber Reinforced Polymers Members for Structural Applications
This paper presents the results of an experimental investigation aiming at determining the mechanical properties of Glass Fiber Reinforced Polymer (GFRP) element produced by the Brazilian industry to classify it for structural applications.. The material samples used in this work were (i) prepared in accordance to ABNT-NBR15708:2011 recommendations, (ii) ext
Mat. Res.. Publicado em: 03/11/2015
-
10. Severe Loading Assessment of Modern and New Proposed Beam to Column Connections
AbstractThe performance of two different steel beam to column connections known as SidePlateTM and a new proposed connection by seismic loading and progressive collapse were investigated in this research. Seismic performance evaluated included consideration of interstory drift angles and flexural strengths based on 2010 AISC Seismic Provisions while investig
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
11. Evaluation of the Effects of Fluids Upon the Flexural and Parallel-plate Loading Behavior of Glass Fiber Reinforced-vinyl Ester Resin Matrix Composite Pipes
Commercial glass fiber reinforced-vinyl ester resin composite pipes used in onshore and offshore utilities were exposed to the action of fluids that could normally come into contact with them during their service life, namely: salt water, biodiesel and a mixture of water and oil. The influence of these fluids upon the flexural properties and parallel-plate l
Mat. Res.. Publicado em: 2015-02
-
12. Effects of CFRP retrofit on impact response of shear-deficient scaled reinforced concrete beams
An experimental procedure is carried out to investigate response features of semi-deep reinforced concrete (RC) beams with dominant static shear failure subjected to low-velocity impact dynamic load both in intact and retrofitted cases. Built specimens have scaled geometry and material properties preserving physical similarity with full-scale members and are
Lat. Am. j. solids struct.. Publicado em: 2015-01