Flexible Pipe
Mostrando 1-12 de 16 artigos, teses e dissertações.
-
1. Head loss in laser-perforated thin-walled polyethylene pipes for irrigation
RESUMO Para reduzir custos fixos e operacionais em sistemas de irrigação pressurizados são produzidos tubos de polietileno com pequena espessura de parede, com orifícios de descarga perfurados a laser, que operam a baixas pressões (até 100 kPa). A caracterização hidráulica desses materiais é essencial para o dimensionamento dos sistemas de irrigaç
Rev. bras. eng. agríc. ambient.. Publicado em: 06/05/2019
-
2. Influencia de la temperatura en ensayos de arrancamiento sobre diferentes sistemas epoxi-acero de uso en conectores de ductos flexibles
ABSTRACT In the offshore oil fields located in deep and ultra-deep waters they are used flexible pipes. In many cases inside these pipes, the hydrocarbons are transported at elevated temperatures. At the ends of the flexible pipes are installed end fittings, these are the connection with sea platforms and different subsea systems. In the assembly of end fitt
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Caracterización de resinas epoxi para uso en conectores de ductos flexibles
ABSTRACT In the offshore productions of gas and oil are frequently used flexible pipes. The end fitting is the connection between the flexible pipe body and the production unit, at the assembly of this component is used epoxy resin to fill the free space inside it. This polymeric material holds the tensile armor wires to form the anchoring system. A critical
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Vibration suppression of a rotating flexible cantilever pipe conveying fluid using piezoelectric layers
AbstractIn this study, the governing equations of a rotating cantilever pipe conveying fluid are derived and the longitudinal and lateral induced vibrations are controlled. The pipe considered as an Euler Bernoulli beam with tip mass which piezoelectric layers attached both side of it as sensors and actuators. The follower force due to the fluid discharge ca
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
5. Molecular dynamic study of the jet noise about the micro-scale tube
This paper studies the two-dimensional micro-scale molecular simulations of the jet flow using Lagrange discrete systems and adopting Andresen flexible constraint mechanism. At the effects of different excitation conditions and boundary conditions, the low Mach number flow field and sound field are obtained, and characteristic results are given. At the jet f
Matéria (Rio J.). Publicado em: 2014-12
-
6. FLEXIBLE RISERS MONITORING TECHNIQUE BASED ON VIBRATION MEASUREMENTS / MONITORAMENTO DE RISERS FLEXÍVEIS ATRAVÉS DE TÉCNICA BASEADA EM VIBRAÇÕES
The main failure in flexible risers is the disruption of the wires from the tensile armor layer. Experience has shown that this class of damage occurs primarily near to the top riser connector. The breaking of the wires occurs gradually and may be caused by different processes as corrosion by inflow of fluid in the annular space, excessive wear associated wi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/04/2012
-
7. Detecção e localização de vazamentos em tubulações utilizando sistemas acústicos e redes neurais / Leak detection and location in pipelines through acoustic method and neural networks
Pipeline networks are complex systems of ducts used nowadays for gas and chemical products transporting through long distances. They frequently cross highly populated regions, water supplies or natural reserves. Even small leaks in pipelines can lead to great losses of products and serious damages to the environment before it could be detected. With the purp
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
8. Instrumentação de um tribômetro para ensaios de deslizamento em dutos flexíveis / Instrumentation of a tribometer for testing the slip in flexible pipe
Os dutos flexíveis são utilizados em larga escala como meio de condução de petróleo, gás e água entre as cabeças dos poços e as plataformas. Os dutos flexíveis são constituídos por camadas de materiais poliméricos, intercaladas com cintas de aço, formando assim um compósito que alia alta resistência à corrosão e flexibilidade de movimentaç
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/04/2011
-
9. Avaliação das armaduras de tração de riser flexível durante ensaios axiais de tração e fadiga
O presente trabalho tem como objetivo avaliar as tensões atuantes no conjunto conector e duto flexível de camadas não aderentes durante ensaios com carregamentos axiais de tração e fadiga. Estes ensaios são utilizados para a qualificação de dutos flexíveis. Foram desenvolvidos e patenteados alguns modelos de conectores contemplando apenas a parte es
Publicado em: 2010
-
10. Modificação do LLDPE através de silanos viabilizando a aplicação em camadas plásticas de linhas flexíveis / Study of silane grafting reactions of low density polyethylene for pipe applications
The flexible lines are flexible structures manufactured through plastic and steel layers that allows its use in order to permit fluid flow in exploration and production of hydrocarbon between offshore oil units and sea bed and/or coast. Nowadays these pipes are one of the main ways to permit the exploration of hydrocarbon in deepwater. The present study aims
Publicado em: 2009
-
11. Avaliação da vida em fadiga de um novo modelo de terminal conector para dutos flexíveis
Este trabalho foca a avaliação da vida em fadiga de um novo modelo de terminal conector para dutos flexíveis (risers) de camadas não aderentes (unbonded). Os ensaios foram feitos levando em consideração apenas a parte estrutural desses dutos, de forma a ensaiar uma nova configuração de ancoragem da armadura de tração encontrada nesse equipamento co
Publicado em: 2009
-
12. Optimization of Polyurethanes for Protection of Flexible Pipes Subject at Abrasion Wear / Otimização de poliuretanos para protetores de linhas flexíveis sujeitos ao desgaste abrasivo
n the last year the Petrobras Company gone self sufficiency of Brazil in the production of petroleum, Its take great effort to achieve technology in the exploration of deeper oil-well offshore. The extraction of petroleum deeper off-shore is make through flexible pipes that has multi layers of metal materials and polymeric materials, connected semi-submersib
Publicado em: 2007