Finite Elements
Mostrando 25-36 de 590 artigos, teses e dissertações.
-
25. Numerical analysis of reinforced concrete asymmetric cross-section beams under oblique bending
Abstract The problem of symmetric cross-section beams under oblique bending is well known to professional designers and academy. In fact, symmetric elements make up most of the cross-sections defined in design. The case of the asymmetric cross-sections is, however, little discussed in literature, but is a particular problem, especially in bridge girder desig
REM, Int. Eng. J.. Publicado em: 2019-06
-
26. Two-Dimensional Numerical Model of the Fracture Process in Steel Fibre Reinforced Concrete with the Continuum Strong Discontinuity Approach and Functional Data Analysis
Abstract This paper presents the formulation of a two-dimensional numeri-cal model able to describe the fracture process in structural mem-bers of steel fibre reinforced concrete (SFRC) from the volume ratio of the fibres and the mechanical properties of the compo-nents: a concrete matrix and a set of steel fibres with a random orientation. The relationship
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
27. Contact phenomena modeling in biological structures on the example of the implant-bone
Abstract The work presents modeling of interface phenomena in biological structures. Selected ways of numerical modeling of phenomena at the boundary of two materials by means of FEM methods are discussed. The work focuses on phenomena related to biological structures and their mutual interactions. Using an example of an implant-bone system, various techniqu
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
28. Development of Improved Models for Estimation of Bursting Stresses in Elements under High-Concentrated Load
Abstract In precast concrete segmental tunnels, radial and circumferential joints are often the most highly stressed parts and it is therefore important to use appropriate equations to accurately analysed these joints during design and provide adequate structural capacity to avoid failure. Different design codes have put forward equations for the estimation
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
29. László Tisza, 110 anos: Origens da Física Térmica Moderna
Resumo A axiomática de László Tisza da termodinâmica é revisitada, identificada a partir de cinco elementos constitutivos, e incluída em uma perspectiva histórica. Através de uma definição de medida, uma análise detalhada da associação do formalismo de Tisza com o experimento é conduzida. A ênfase da apresentação é para a relação da axiom
Rev. Bras. Ensino Fís.. Publicado em: 10/01/2019
-
30. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 07/01/2019
-
31. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 20/12/2018
-
32. Análisis de los elementos principales en el diseño de placas de bloqueo en una fractura de 2-partes del cuello quirúrgico del húmero utilizando MEF y análisis estadístico
ABSTRACT A large number of proximal humerus fractures are being treated with osteosynthesis. However, loss of reduction remains a serious problem and it can cause screw cutout at the humeral joint and reoperation. According to the interfragmentary strain theory, one should be aware of the balance between a flexible fixation, which stimulates callus formation
Matéria (Rio J.). Publicado em: 06/12/2018
-
33. A computational framework for predicting onset and crack propagation in composite structures via eXtended Finite Element Method (XFEM)
Abstract The eXtended Finite Element Method (XFEM) has been reliably used for analyzing crack growth in 3D structural elements over last years. In fact, many researchers have worked in this field, but it is scarce to find scientific contributions about 3D XFEM models applied to the failure of non-standard composite parts, such as tapered structures and thick
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
34. Sensitivity analysis of 3D frictional contact with BEM using complex-step differentiation
Abstract This paper presents a study of the complex step differentiation method applied to a parameter sensitivity analysis for 3D elastic contact problem. The analysis is performed with the Boundary Element Method (BEM) using discontinuous elements and the Generalized Newton Method with line search (GNMls). A standard BEM implementation is used and the cont
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
35. Numerical simulation of bolted connections
Abstract This article presents the modeling of a complete bolted connection based on a model with one bolt connecting two or three plates. Initially, the behavior of this model with one bolt is analyzed by comparing it with existing bibliography for 3 different types of applied load: tension, shear and a combination of these two. This model includes all nece
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
36. Aspects of Finite Element Modeling of Punching Shear Behavior of Reinforced Concrete Flat Slabs
Abstract A series of nonlinear FE analyses was conducted in this paper to model the punching shear failure of RC flat slabs. The analyses were carried out in the software DIANA using three-dimensional continuum elements. These analyses involve the test of different modeling choices in order to evaluate their influences on punching shear failure modeling. The
Lat. Am. j. solids struct.. Publicado em: 04/10/2018