Finite Element Method
Mostrando 25-36 de 873 artigos, teses e dissertações.
-
25. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
26. Nonlinear numerical analysis of composite slabs with steel decking
Resumo O comportamento das lajes mistas é governado pelo cisalhamento longitudinal na interface entre o aço e o concreto, que é desenvolvido em lajes sob flexão simples. O método m-k e o método da interação parcial, utilizados no cálculo da resistência ao cisalhamento na interface aço-concreto de lajes mistas, são baseados em ensaios experimentai
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
27. Nonlinear static analysis of a pile-supported wharf
Resumo O objetivo deste artigo é desenvolver uma análise estática não-linear através de um estudo de caso de um cais sobre estacas situado em uma nova área portuária para petroleiras. A atividade sísmica da área é muito intensa com uma aceleração máxima do solo de 0.55 g. Por esta razão, é muito importante analisar o comportamento estrutural n
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
28. Impact responses of slender composite plates for bird-strike testing of fan blades
Abstract Bird-strike failure of fan blades is one of the basic challenges for the safety of aircraft engines. Simplified slender blade-like plates are always used to evaluate the impact-induced damage mechanism at design stage. One undesirable issue is the failure at the root of clamped slender plates, which cannot recover the real case of twisted blades. Fo
Lat. Am. j. solids struct.. Publicado em: 04/11/2019
-
29. Large deflection and initial instability analysis of anisotropic plates by the generalized finite element method
Abstract This paper presents investigations laminated plates under moderately large transverse displacements and initial instability, through the Generalized Finite Element Methods - GFEM. The von Kármán plate hypothesis are used along with Kirchhoff and Reissner-Mindlin kinematic plate bending models to approximate transverse displacements and critical bu
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
30. New nonlinear solution of nearly incompressible hyperelastic FGM cylindrical shells with arbitrary variable thickness and non-uniform pressure based on perturbation theory
Abstract In this paper, nonlinear analysis of thick cylindrical shells with arbitrary variable thickness made of hyperelastic FGM with radially variation of material properties in nearly incompressible state under non-uniform pressure loading is presented. Thickness and pressure of the shell vary in axial direction by linear and/or nonlinear functions. The g
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
31. Effect of α/β Forging on Microstructure and Texture Inhomogeneity in a Ti-1023 Forged Disk
The microstructure and texture distribution of a Ti-1023 forged disk were investigated by scanning electron microscopy and synchrotron-based high-energy X-ray diffraction. The finite element method was used to simulate temperature and strain distribution in order to investigate the relationship of the α/β forging process with microstructure and texture dis
Mat. Res.. Publicado em: 30/09/2019
-
32. DESIGN OF EXPERIMENTS USED IN COMPUTER TRIALS: A SUPPORTIVE METHOD FOR PRODUCT DEVELOPMENT
ABSTRACT The study proposes the development of a framework that can take advantage of the Design and Analysis of Computer Experiments (DACE) more efficiently. The need for rapid product development cycles creates a demand for tools that aid in decision making. One of these tools is Computer Aided Engineering which uses the Finite Element Method that requires
Pesqui. Oper.. Publicado em: 23/09/2019
-
33. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 16/09/2019
-
34. Uma abordagem experimental e numérica para determinação de curvas de compressão para concreto simples e reforçados com fibras de aço
RESUMO A curva tensão-deformação do concreto é importante para o dimensionamento de estruturas, pois por meio dela é possível obter sua resistência à compressão, sua deformação de pico, o módulo de elasticidade e a tenacidade do concreto. Entretanto, essa é uma propriedade que não é comumente determinada nos ensaios de controle de qualidade do
Matéria (Rio J.). Publicado em: 16/09/2019
-
35. On-load Back-EMF Optimization Based on the Back-EMF MST Method and Parametric Optimization
Abstract This paper proposes an optimal design for a surface mounted permanent magnet synchronous machine (SM-PMSM) based on parametric optimization process to reduce the on-load Back-EMF distortions caused by an increase in the electromagnetic load and in the saturation. Unlike conventional methods described in the literature, the optimization approach prop
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
36. The Structure-Soil-Structure Interaction Effects on the Response of the Neighbouring Frame Structures
Abstract The Structure-Soil-Structure Interaction (SSSI) phenomenon between the neighbouring structures has been interested lesser than Soil-Structure Interaction. However, in urban environments, the structures have to be constructed in the neighbourhood, and it is inevitable that these structures affect each other’s responses. This study examines the Stru
Lat. Am. j. solids struct.. Publicado em: 12/09/2019