Filler
Mostrando 1-12 de 310 artigos, teses e dissertações.
-
1. Influence of bottom ash and red mud additions on self-leveling underlayment properties
Abstract Self-levelling underlayments (SLUs) based on Portland cement (PC) are susceptible to cracking due to drying shrinkage. The present study evaluated the influence of binder contents on systems consisting of calcium aluminate cement (CAC), PC, and a source of calcium sulfate (C$), derived from the flue gas desulfurization process (FGD), on the mechanic
Cerâmica. Publicado em: 2022
-
2. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
3. Visual loss after aesthetic facial filler injection: a literature review on an ophthalmologic issue
RESUMO O uso de preenchedores dérmicos é uma prática bem estabelecida de rejuvenescimento facial. Embora seja um procedimento minimamente invasivo, pode levar a complicações graves como cegueira. Uma revisão de casos de perda visual pós preenchimento facial estético foi conduzida para descrever os mecanismos, considerações anatômicas, quadro oftal
Arquivos Brasileiros de Oftalmologia. Publicado em: 2022
-
4. Renal volume of five-year-old preterm children are not different than full-term controls
Abstract Objective: In previous studies, smaller renal volumes were reported in prematurely born infants, however, these renal volumes were not corrected for body surface area, the main determinant of renal size. Given the rapid growth of the renal cortex after premature birth, the authors hypothesized that corrected volumes would not differ from healthy co
Jornal de Pediatria. Publicado em: 2022
-
5. Influence of the physical characteristics of sand and the crushed filler content on the properties of self-leveling mortars
Abstract The properties of self-leveling mortars (SLMs) in the fresh and hardened state are strongly affected by their formulation. In this study, the influence of three different quartz sands (different physical characteristics) was investigated in SLMs, as well as the replacement of these sands by crushed basalt filler. The tests performed were: spreading,
Cerâmica. Publicado em: 2021-06
-
6. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
7. Influência do hidróxido de cálcio na autocicatrização autógena de materiais a base de cimento expostos a dferentes ambientes de exposição
Resumo Diversos fatores, como retração química ou ataques ambientais podem produzir fissuras no concreto. O teor de hidróxido de cálcio do meio ambiente ou a hidratação do cimento podem promover o fenômeno de autocicatrização (SHP). Este estudo avalia a influência da concentração de hidróxido de cálcio no fenômeno de autoicatrização de mate
Ambient. constr.. Publicado em: 2021-04
-
8. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
9. Utilization of ferronickel slag in hot mix asphalt
Abstract The growing concern in minimizing the disorderly disposal of waste in nature has been influencing measures that seek to give new environmentally sustainable and economically viable purposes for these materials. The use of steel slag aggregate in road paving emerges as an alternative for reducing the storage of this material in industrial yards, as w
REM, Int. Eng. J.. Publicado em: 2021-01
-
10. Serpentinites: Mineral Structure, Properties and Technological Applications
Serpentine is a versatile mineral family rich in Mg silicate with several polymorphic phases, mainly antigorite and lizardite, all of them with similar chemical composition (Mg3Si2O5(OH)4). Their structures are generally composed of octahedral layers rich in Mg[MgO2(OH)4]6- , attached to a tetrahedral silicate [Si2O5]2- sheet. The unique physicochemical prop
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
11. Consumption of superplasticizer admixture for different cements and their binder efficiency
Resumo Foram estudados, em cimentos e fillers calcários, os teores ótimos de superplastificante (base policarboxilato éter), determinados através de reometria rotacional, e estimados seus efeitos nos impactos ambientais de concretos. Ensaios de espalhamento de argamassas em mesa de consistência foram feitos para determinação da redução de água e es
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
12. Análises de dosagens de concreto asfáltico do tipo Pré Misturado a Frio (PMF) utilizando Resíduos da Construção e Demolição de obras (RCD)
RESUMO Na construção civil, um problema ambiental recorrente é a geração e disposição de Resíduos de Construção e Demolição (RCD) de obras. A utilização do RCD como agregados na composição de concreto asfáltico, do tipo Pré Misturado a Frio (PMF), torna possível a execução de pavimentos rodoviários de baixo tráfego. Diante desses fatos
Matéria (Rio J.). Publicado em: 25/11/2019