Faults Detection
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. Equipment for Monitoring Synchronous Generators Condition through External Magnetic Field Waveforms
Abstract This paper presents an equipment for monitoring synchronous generators condition through characteristics of the time derivative of the external magnetic field. The developed monitoring methodology allows the identification of established or incipient faults, by detecting changes in the magnetic signature of the synchronous generator. In this methodo
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Tempo de Voo da Onda Difratada (ToFD) Auxilia na Garantia da Qualidade da Produção de Peças e Estruturas Mecânicas
Resumo A Técnica Tempo de Voo da Onda Difratada (ToFD) é uma técnica de ensaio não destrutivo por ultrassom utilizada para a detecção de falhas e descontinuidades em diferentes componentes, garantindo a qualidade, confiabilidade e segurança. É amplamente utilizada na indústria, principalmente na avaliação de peças e estruturas mecânicas. É lar
Soldag. insp.. Publicado em: 14/11/2019
-
3. Use of a combined SVD-Kalman filter approach for induction motor broken rotor bars identification
Abstract This paper describes a new parametric spectral estimator for the identification of rotor bar fault of an induction motor by analyzing the stator current. This approach combines two methods: The first one, the Singular Value Decomposition method which allows the accurate detection and location of the fault's signature frequency. The second method all
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-03
-
4. Reducing the Effects of Inaccurate Fault Estimation in Spacecraft Stabilization
ABSTRACT Reference Governor is an important component of Active Fault Tolerant Control. One of the main reasons for using Reference Governor is to adjust/modify the reference trajectories to maintain the stability of the post-fault system, especially when a series of actuator faults occur and the faulty system can not retain the pre-fault performance. Fault
J. Aerosp. Technol. Manag.. Publicado em: 2017-12
-
5. Non-invasive monitoring system of synchronous generator using external field
Abstract This paper presents an equipment dedicated to the monitoring of synchronous generator through the measurements of the external magnetic field time derivative. The equipment uses a methodology which can be an additional technique to those applied currently on the faults detection, mainly when monitoring the incipient faults type. Based on frequency s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03
-
6. Detecção de defeitos do tipo Resistive-Open em SRAM com o uso de lógica comparadora de vizinhança
The world we live today is very dependent of the technology advance and the Systemson- Chip (SoC) are one of the most important actors of this advance. As a consequence, the Moore s law has been outperformed due to this strong demand on the SoCs for growth, so that new silicon technologies has emerged along with new fault models that decreased the reliabilit
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2012
-
7. Uma contribuição para a detecção de faltas fase-terra de alta impedância
Este trabalho trata da proteção de redes de distribuição de energia elétrica contra faltas de alta impedância (FAI). È proposto uma metodologia para a detecção de FAI através da detecção do gráu de desequilíbrio das redes elétricas e da implementação da técnica em religadores e chaves seccionalizadoras. É desenvolvido um software destinado
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/03/2012
-
8. Detection and analysis of rotor faults in induction motors by the measurement of the stray magnetic flux
This paper presents measured data and electromagnetic FEM field calculations as techniques for detecting and analyzing eccentricity in three-phase induction motors. Also it presents experimental results for detecting broken bars in induction motor rotors. A search-coil is used as magnetic field sensor to measure the stray magnetic flux outside the motor. It
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2012-06
-
9. CFT-tool : ferramenta configurável para aplicação de técnicas de detecção de falhas em processadores por software / CFT-tool: configurable tool to application of faults detection techniques in processors by software
Este trabalho apresenta uma ferramenta configurável, denominada de CFT-tool, capaz de aplicar automaticamente técnicas de detecção de erros em software com o objetivo de proteger processadores com diferentes arquiteturas e organizações contra falhas transientes no hardware. As técnicas baseadas em redundância e comparação são aplicadas pela CFT-to
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
10. Detecção de falhas em circuitos eletrônicos lineares baseados em classificadores de classe única. / Fault detection in electronics linear circuits based in one class classifiers.
This work deals with the application of one class classifiers in fault detection. The faults to be detected are related parametric faults. The transfer function of each circuit was generated and the outputs signals with the components in and out of tolerance were analyzed. Pattern recognition and one class classifications tools are employed to perform the an
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2011
-
11. MÉTODOS PARA CORREÇÃO DAS DISTORÇÕES DA FORMA DE ONDA SECUNDÁRIA CAUSADAS PELA SATURAÇÃO DE TRANSFORMADORES DE CORRENTE PARA SERVIÇO DE PROTEÇÃO / METHODS FOR CORRECTION OF SECONDARY WAVEFORM DISTORTIONS CAUSED BY SATURATION OF CURRENT TRANSFORMERS FOR PROTECTIVE RELAYING PURPOSES
This work aims to evaluate the performance of some methods used to detect and correct the distorted portions of the secondary current signal waveform, which occur due to the core saturation of current transformers. Such methods are presented didactically divided among techniques existing in the specialized literature and new methodologies proposed. Involving
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/02/2011
-
12. Procedimento de teste para deteccao de falhas no processador transputer / Test procedure for faults detection in the transputer processor
Procedimentos de teste para dispositivos eletrônicos tem sido construídos de forma a lidar com problemas, tais como geração de padrões de teste, cobertura de falhas e outros parâmetros tais como custo e tempo. Com o surgimento dos circuitos VLSI (Very Large Scale Integration), tais como os processadores, os problemas do teste tem aumentado. Com relaç�
Publicado em: 2010