Ellipsometry
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. Silver nanoparticle thin films deposited on glass surface using an ionic silsesquioxane as stabilizer and as crosslinking agent
Thin films containing silver nanoparticles homogeneously dispersed, with narrow size distribution below 10 nm, were synthesized on flat glass surface, by using an ionic silsesquioxane as stabilizer and crosslinking agent. The films can be prepared without previous functionalization of substrate surfaces and without addition of other components. The films wer
J. Braz. Chem. Soc.. Publicado em: 2015-05
-
2. Síntese e caracterização de misturas poliméricas condutoras para aplicação em membranas biodegradáveis e dispositivos eletroluminescentes / Synthesis and characterization of conducting polymeric blends for use in biodegradable membranes and electroluminescent devices
The electrical properties of some conducting polymers and their blends have contributed to the technological advancement in various areas such as medicine and microelectronics. Recently, photochemical synthesis and spinner techniques have been using to prepare polymeric blends with good conducting properties. In this study we report the preparation of conduc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/08/2012
-
3. Aplicação da técnica de elipsometria de emissão para caracterização de materiais luminescentes
In this work we demonstrated the potential of the emission ellipsometry in the scope of the Stokes theory for electromagnetic field to the photophysics study of luminescent materials, in addition we introduce a new methodology using an achromatic quarter-wave plate. Moreover, the use of linearly polarized light allowed "selectively" the study of various phot
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/02/2012
-
4. Filmes ultrafinos de ésteres de celulose: preparo, caracterização e imobilização de proteínas
In this study cellulose acetate butyrate (CAB) and carboxymehtylcellulose acetate butyrate (CMCAB) films adsorbed onto silicon wafers were characterized by means of ellipsometry, atomic force microscopy (AFM), sum frequency generation spectroscopy (SFG) and contact angle measurements. The adsorption behavior of lysozyme (LIS) or bovine serum albumin (BSA) on
Química Nova. Publicado em: 2010
-
5. Study of optical and electro-optical properties of diamond-like carbon films - DLC. / Estudo das propriedades ópticas e eletro-ópticas de filmes de carbono amorfo tipo diamante - DLC.
In this work it was studied electrical and optical characteristics of diamond-like carbon (DLC) films deposited in a reactive RF magnetron sputtering system on silicon and glass substrates. Samples were deposited at different process conditions in each type of substrate at two pressure conditions (5 mTorr and 10 mTorr) and four conditions of RF power (100 W,
Publicado em: 2010
-
6. Characterization and application of thin film of carboxymehtylcellulose acetate butyrate / Caracterização e aplicação de filmes finos de acetato butirato carboximetil celulose
The effect of ethyl acetate and acetone on the solution behavior of cellulose acetate butyrate (CAB) and carboxymehtylcellulose acetate butyrate (CMCAB) and on the characteristics of films obtained either by spin coating or adsorption was investigated. Viscosity and small angle X-ray scattering (SAXS) measurements showed that ethyl acetate is a better solven
Publicado em: 2009
-
7. Caracterización eléctrica de películas delgadas de Al2O3 depositadas sobre GaAs por la técnica de rocío pirolítico
Electrical characteristics of thin films of aluminum oxide prepared by spray pyrolysis were studied. The films were prepared from solution onto single crystal GaAs (100) substrates at temperatures from 300°C to 600°C. The electrical characteristics of these films as a function of the substrate temperature were determined from the capacitance and current ve
Matéria (Rio de Janeiro). Publicado em: 2008-03
-
8. Obtenção de filmes finos de TiO2 nanoestruturado pelo método dos precursores poliméricos
This work focuses in optimizing setup for obtaining TiO2 thin films by polymeric precursor route due to its advantages on stoichiometric and morphological control. Precursor stoichiometry, synthesis pH, solids concentration and rotation speed at deposition were optimized evaluating thin films morphology and thickness. Thermogravimetry and RMN were applied fo
Química Nova. Publicado em: 2008
-
9. Characterization of thin titanium oxite films for ISFET application / Caracterização de filmes finos de oxido de titanio obtidos atraves de RTP par aplicação em ISFETs
This work presents the characterization of thin titanium oxide films as potential dielectric to be applied in ion sensitive field effect transistors. The films were obtained through rapid thermal oxidation and annealing of titanium thin films of different thicknesses deposited by Ebeam evaporation on silicon wafers. These films were analyzed by Ellipsometry,
Publicado em: 2008
-
10. Isolantes de porta com altas constantes dieletricas (High K) para tecnologia MOS / High K gate insulators for MOS technology
High k insulators for the next generation (sub-32 nm CMOS (complementary metaloxide-semiconductor) technology), such as titanium oxide (TiOx), titanium oxynitride (TiOxNy), titanium-aluminum oxynitride (AlxTiwOyNz), titanium-aluminum nitride (AlxTiwNz) and titanium-aluminum oxide (AlxTiwOy), have been obtained by Ti or Ti/Al e-beam evaporation, with addition
Publicado em: 2008
-
11. Immobilization of proteins onto polysaccharide surfaces / Imobilização de proteínas sobre superfícies de polissacarídeos
This thesis presents the study on thin film formation and characterization of xyloglucans extracted from two different sources, Hymenaea courbaril (HXG) and Tamarindus indica (TXG) onto Si/SiO2 wafers or amino-terminated wafers, as well as the application of these films as substrates for the immobilization of the lectin concanavalin A (Con A) by means of ell
Publicado em: 2008
-
12. Cellulose acetate propionate coated titanium: characterization and biotechnological application
Surfaces of pure titanium and Ti coated with cellulose acetate propionate (CAP) have been characterized by means of scanning electron microscopy X ray coupled with elemental microanalysis (SEM-EDS), ellipsometry, atomic force microscopy (AFM) and contact angle measurements. Coating Ti surfaces with CAP ultrathin films reduced original surface roughness. Surf
Materials Research. Publicado em: 2007-12