Elastomer
Mostrando 1-12 de 65 artigos, teses e dissertações.
-
1. SYNTHESIS OF TOLUENE DIISOCYANATE URETHANE PREPOLYMER USING CASTOR OIL AND EVALUATION OF MECHANICAL PROPERTIES
This research is the synthesis of urethane prepolymer cast elastomer which had been produced using toluene diisocyanate and castor oil to replace the synthetic polyol, from petroleum origin, and the evaluation of mechanical properties of the polyurethane. The focus was to replace polyol from petroleum to vegetable material looking for renewable resources. Th
Química Nova. Publicado em: 2022
-
2. Sustainable blends of LDPE/NR and sugarcane bagasse ashes with PE-g-MA thermomechanical relationships
RESUMO As blendas poliméricas obtidas com resíduos que antes eram chamados de lixos vêm crescendo como uma solução viável, permitindo melhorias nas propriedades mecânicas e como alternativas sustentáveis. Este trabalho relata os efeitos de misturas de polietileno de baixa densidade (PEBD) e borracha natural(NR), com cinzas de bagaço de cana-de-açú
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Quantification of Aerospace Polymer Blends by Thermogravimetric Analysis and Infrared Spectrometry
ABSTRACT Ethylene-propylene-diene elastomer (EPDM) is employed as thermal insulation for rocket motors, as well as EPDM blends with ethylene vinyl acetate (EVA) have been used in the aerospace industry. The quantification of these blends is more common using Fourier Transform Infrared Spectrometry (FT-IR) by transmission mode, but without discussing sample p
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
4. Quantification by FT-IR (UATR/NIRA) of NBR/SBR blends
Abstract Rubber blends are important materials in automotive industry, as well as in other sectors. However, there are implications when suitable use of a polymer in an artifact is not made. In the automotive area, for example, the use of an elastomer without the fuel resistance requirement would result in component degradation, potential fuel leakage, and
Polímeros. Publicado em: 29/11/2018
-
5. Effects of Rotor Speed on Peroxide/Bismaleimide Cured Polypropylene/Nitrile Rubber Thermoplastic Vulcanizates (TPVs)
Elastomer thermoplastics are a class of polymeric materials that received industry attention due to the possibility of joining the elastic of elastomers with the thermoplastics processability. The synergistic properties are linked to the appropriate processing. This study evaluated the effect of rotor speed during polymer mixing and the dynamic vulcanization
Mat. Res.. Publicado em: 09/08/2018
-
6. Estrategia para la optimización de un compuesto de caucho con aceite de soja utilizando diseños de experimentos
ABSTRACT When a rubber component is made, is necessary to start from a “rubber compound” which may be composed of one or more polymers and various additives or fillers. The development of an elastomer mixture to produce a compound with a specific end-use is complicated in the field of rubber technology. Therefore, the successful development of a compound
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Compatibilization of recycled polypropylene and recycled poly (ethylene terephthalate) blends with SEBS-g-MA
Abstract The compatibilization of recycled PP/PET blend with high and low concentration (20 and 5 phr) of elastomer functionalized by maleic anhydride (SEBS-g-MA) was achieved. Recycled polypropylene from plastic industry and recycled PET from post-consumer bottles was used. PP/PET blends: 80:20 w/w, 50:50 w/w and 20:80 w/w were prepared in an internal mixe
Polímeros. Publicado em: 15/03/2018
-
8. A Microrheological Study of Poly(Methyl Methacrylate) Elastomer/Poly(Ethylene Terephthalate) (PMMAelast/PET) Blends
This study involved an evaluation of the influence of phase inversion in poly(methyl methacrylate) elastomer/poly(ethylene terephthalate) binary blends (PMMAelast/PET) and the effect of the addition of poly(methyl methacrylate-glycidyl methacrylate-ethyl acrylate) (MGE) interfacial compatibilizer on the microrheological properties of this polymer blend. Ther
Mat. Res.. Publicado em: 30/11/2017
-
9. Evaluation of Filler Effects on the Dynamic Mechanical Behavior of HTPB-Elastomer Used as Binder in Exemplary Composite Formulations
ABSTRACT: This study aims to evaluate the dynamic mechanical properties of a binder, used in composite propellants, with increasing amount of different solid fillers. Dynamic Mechanical Analysis (DMA) is performed to determine the region of glass-rubber transition temperature (Tg). Further parameters were obtained from the description of the loss factor curv
J. Aerosp. Technol. Manag.. Publicado em: 2017-09
-
10. Effect of clay incorporation in the dimensional stability of FKM nanocomposite
ABSTRACT In this work was studied the effect of nanoparticle incorporation in the dimensional stability of elastomer matrix. To avoid excessive swelling and consequently dimensional instability in the films, crosslinking has been shown to be an efficient and simple method for achieve the reducing membrane swelling and improving mechanical stability. The elas
Matéria (Rio J.). Publicado em: 20/07/2017
-
11. Influence of ZnO and TiO2 Particle Sizes in the Mechanical and Dielectric Properties of Vulcanized Rubber
The novelty of the present study relies on the straightforward sonication of ZnO and TiO2 and incorporation to a complex formulation of latex, with other several organic-inorganic additives that influences the cross-linking reactions. The new elastomer with particles carefully sonicated exhibit improved electrical and mechanical properties. Strong interactio
Mat. Res.. Publicado em: 22/06/2017
-
12. Nonlinear Forced Vibration Analysis of Dielectric-Elastomer Based Micro-Beam with Considering Yeoh Hyper-Elastic Model
Abstract The present study investigates nonlinear forced vibration of dielectric elastomer-based micro-beam. The nonlinear terms in beam equation are geometric and material one. Geometric nonlinearity is considered by von-Karman strain displacement relationship and the material nonlinearity is modeled with Yeoh hyper-elastic model. Galerkin and Multiple scal
Lat. Am. j. solids struct.. Publicado em: 2017-03