Eddy Current
Mostrando 1-12 de 20 artigos, teses e dissertações.
-
1. Characterization of reverse martensitic transformation in cold-rolled austenitic 316 stainless steel
ABSTRACT In this work the reversion of the strain-induced ?’-martensite to ?’-austenite was studied in a series of AISI 316 stainless steels (SS) specimens. The samples were submitted to 63% reduction in thickness by rolling at a temperature of -70ºC, to achieve high martensite content. The reversion of martensite to austenite was made by means of isoch
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Modal Parameter Extraction of a Huge Four Stage Centrifugal Compressor Using Operational Modal Analysis Method
Abstract In recent years, modal analysis has become one of the essential methods for modification and optimization of dynamic characteristics of engineering structures. This is the first published study to identify modal parameters of a complex four-stage centrifugal compressor using Operational Modal Analysis (OMA). Vibrational response was measured contin
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
3. Design and Damping Analysis of a New Eddy Current Damper for Aerospace Applications
Abstract In order to reduce the structural vibrations of a mechanical system used in aerospace, a new sketch of eddy current damper (ECD), consisting of one cylindrical permanent magnet, two ring-shape copper plates, one axial transmission shaft and electromagnetic shield, is proposed. Three dimensional (3D) electromagnetic transient analysis on damping perf
Lat. Am. j. solids struct.. Publicado em: 2016-11
-
4. Effect of Aluminium Addition on the Magnetic Properties of a Semi-Processed Electrical Steel
Aluminum is often added to electrical steels since this element causes improvement of the magnetic properties. However the addition of aluminum is usually limited to 0.30 wt%1. Therefore, this work aimed at evaluating the influence of higher levels of aluminum in the magnetic properties of semi-processed steels. To accomplish this, four types of steel were p
Mat. Res.. Publicado em: 12/09/2016
-
5. Correntes de Foucault: Aspectos básicos
Este artigo foi escrito para mostrar aos alunos de graduação em física e engenharia como estimar as correntes de Foucault. Inicialmente fazemos uma breve análise das condições de contorno entre dois meios com diferentes parâmetros ε, µ e σ, que devem ser obedecidas tanto por campos eletromagnéticos estáticos quanto dependentes do tempo. Em seguid
Rev. Bras. Ensino Fís.. Publicado em: 2014-06
-
6. An analysis on electric and magnetic behaviour on an induction planar actuator
The induction planar actuator, i.e. IPA, proposed in this study presents an electromagnetic structure formed by a static ferromagnetic core with an aluminium plate that corresponds to the secondary, and a mover, also called primary. The latter comprehends two three-phase windings, mounted in an armature core, which are orthogonal to each other. When they are
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-06
-
7. Relationship between peak and mean amplitudes of the stimulating output voltage for functional control of the knee by spinal cord patients and healthy volunteers
INTRODUCTION: Functional electrical stimulation (FES) may evoke movements in people with movement impairments due to neurological lesion. The mean value of electrical current or voltage during FES depends on the stimulatory profile parameters. To investigate the relationship between peak and mean amplitudes of the stimulator output voltage while causing a kn
Rev. Bras. Eng. Bioméd.. Publicado em: 2013-06
-
8. Análise de defeitos em tubos de geradores de vapor de usinas nucleares utilizando a transformada de Hilbert-Huang em sinais de inspeção por correntes parasitas / Defects diagnosis of nuclear power plant steam generator tubes using the Hilbert-Huang Transform in eddy current testing signals
Os tubos de Geradores de Vapor em Reatores Nucleares do tipo PWR são submetidos a diferentes níveis de tensões e carregamento em altas temperaturas, reduzindo sua vida útil devido o surgimento de defeitos e corrosão. A inspeção por Correntes Parasitas é um ensaio não destrutivo usado para diagnosticar defeitos de corrosão e descontinuidades na supe
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/05/2012
-
9. A study on the extension of an upwind parallel solver for turbulent flow applications
The present work is primarily concerned with studying the influence of an upwind spatial discretization on the capability of representing turbulent flows on aerospace applications, in the context of a flow simulation code that is fairly close to a production code. Therefore, the work addresses the issues of implementing and validating an advanced turbulence
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/02/2012
-
10. Padrões de escoamento baroclínico de mesoescala ao largo do Embaiamento de Tubarão e do Banco de Abrolhos / Mesoscale baroclinic flow patterns off the Tubarão Bight and Abrolhos Bank
A região oceânica adjacente ao Embaiamento de Tubarão (ET) e ao Banco de Abrolhos (BAb) talvez seja uma das menos investigadas da margem continental brasileira. Estudos acerca da circulação nesta porção da costa atualmente restringem-se a trabalhos realizados na década de 80 e 90. Recentemente, estudos focando a atividade de mesoescala e a variabilid
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/02/2012
-
11. Estudo de confiabilidade e assertividade na inspeção superficial pelo método de corrente parasita
A base deste trabalho visa analisar a capacidade de detecção de diferentes tipos de defeitos superficiais em barras trefiladas redondas, onde para o tal estudo do utilizado o equipamento com princípio ensaio de correntes parasitas (eddy current) ¿ CIRCOGRAPH. Foram selecionadas aleatoriamente 13 barras com defeitos superficiais, sendo o tipo de defeito c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
12. Análise computacional da distribuição de campos e correntes e reconstrução de imagem em um sistema de tomografia de indução magnética / Computational analysis of current and field distribution and image reconstruction in a magnetic induction tomography system
A Tomografia de Indução Magnética é uma técnica em desenvolvimento para a visualização das propriedades eletromagnéticas de um objeto. Difere de outras técnicas de produção de imagens a partir de sinais eletromagnéticos por se tratar de um método não invasivo e sem contato cuja sua finalidade principal é a obtenção da distribuição de condu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/08/2011