Determination Of Thermal Properties
Mostrando 1-12 de 74 artigos, teses e dissertações.
-
1. On the Use of a TiO2 Sol-Gel for Horseradish Peroxidase Enzyme Immobilization for Development of an Amperometric Biosensor
The sol-gel technique has drawn considerable attention in the area of biomolecules immobilization by virtue of its intrinsic properties including chemical inertness, thermal stability, and good biocompatibility. The present work reports the development of a bio-sensing methodology which involves the immobilization of horseradish peroxidase enzyme (HRP) on pe
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
2. Thermal Stability and Kinetic of Decomposition of Mono- and Dicationic Imidazolium-Based Ionic Liquids
Phase transitions, thermal stability, thermokinetics and activation parameters of degradation reaction of the dicationic ionic liquids (ILs), 1,n-bis(3-methylimidazolium-1-yl)alkane ([BisAlk(MIM)2][2Br]) and monocationic ILs, 1-(3-methylimidazolium-1-yl)alkane ([Alk(MIM)][Br]), where Alk = Dec, DoDec, TetDec, (decane, dodecane, tetradecane) were evaluated. T
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
3. EVALUATION OF DISTILLATION CURVES FOR BIO-OIL OBTAINED FROM THERMAL CRACKING OF WASTE COOKING OIL
ABSTRACT Bio-oil obtained from thermal cracking of waste cooking oil (WCO) is a complex mixture of different chemical compounds and, like crude oil, it is composed mainly of hydrocarbons. The large number of compounds in bio-oil leads to complex and expensive methods for its properties determination. In this study, the distillation curves were constructed fo
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
4. Influência da porosidade em algumas propriedades mecânicas da liga de Al-6,5%Si-0,6%Mg fundida e tratada termicamente
RESUMO As ligas de Al-Si-Mg são atualmente as mais utilizadas para obtenção de peças fundidas comerciais, isto porque as propriedades mecânicas desses materiais podem ser melhoradas através de tratamentos térmicos. No entanto, cabe salientar que nas peças fundidas de ligas de alumínio, a porosidade é o defeito que ocorre mais frequentemente. Esse d
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Estudio del comportamiento en enfriamiento continuo del acero martensítico ferrítico de activación reducida F82H
ABSTRACT 9% Cr martensitic-ferritic steels are currently the privileged candidates to manufacture structural components of the so-called Generation IV nuclear fission reactors, because they exhibit very good thermophysical and mechanical properties under neutron irradiation. Along with them, the so-called Reduced Activation Ferritic-Martensitic steels (RAFM�
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Mechanical characterization of PM aluminum composites by small punch test
ABSTRACT In this work Small Punch Test (SPT) was applied to study the mechanical behavior of ultrafine-grained Al-Al2O3metal matrix composites (MMCs) fabricated in situ via powder metallurgy route (HITEMAL®). Such MMCs show attractive mechanical properties, enhanced creep performance and increased thermal stability at elevated temperatures, not normally ass
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Correlations of microstructure and mechanical properties of the ternary Sn-9wt%Zn-2wt%Cu solder alloy
The microstructure length-scales (dendritic and eutectic), morphologies and tensile properties of a ternary Sn-9wt.%Zn-2wt.%Cu alloy are compared with those of a binary eutectic Sn-9wt.%Zn alloy. The following experimental/analytical steps were performed: transient directional solidification experiments of the Sn-9wt.%Zn-2wt.%Cu alloy; measurements of second
Mat. Res.. Publicado em: 11/01/2018
-
8. Epoxidized natural rubber and hydrotalcite compounds: rheological and thermal characterization
Abstract Epoxidized natural rubber (ENR) and synthetic non-modified hydrotalcite (HT) compounds were prepared and evaluated. Natural rubber (NR) was epoxidized with 20.6% of epoxy groups from a chemical modification of the latex. A sulfur-based curing system formulation with accelerators was used. The amounts of HT in the ENR-HT compositions was varied betwe
Polímeros. Publicado em: 21/09/2017
-
9. Preparation and Characterization of the Structural, Optical, Spectroscopic and Electrical Properties of Pr2O5 doped Borate Glass
Abstract We have successfully synthesized Pr2O5 doped borate glasses by conventional rapid melt quench method. The XRD pattern indicates the amorphous nature of Pr2O5 doped borate glass. An optical property of prepared borate glass was studied using the Photoluminescence spectrum. Determination and differentiation of the various vibrational modes were done u
Mat. Res.. Publicado em: 18/07/2016
-
10. Hybrid Materials Based on Bentonite Functionalized with Amine Groups via the Hydrolytic Sol-Gel Method
Bentonite is a natural clay that presents characteristics such as good capacity to exchange cations, large specific surface area, large porosity, and possibility to undergo intercalation and/or functionalization. This work reports on bentonite functionalization with organomodified alkoxides. Functionalization afforded hybrid materials displaying desirable pr
J. Braz. Chem. Soc.. Publicado em: 2016-05
-
11. Determination of Microstructure, Mechanical, Electrical and Thermal Properties of The Directionally Solidified Al-Si-Co Ternary Alloy
In this work, Al-12.6Si-2Co (wt.%) ternary alloy of near eutectic composition was directionally solidified at a constant temperature gradient (G=7.60 K/mm) in a wide range of growth rates (V=8.35-166.30 µm/s) using by Bridgman type growth apparatus. Flake spacing (λ), microhardness (HV), tensile stress (σ) and electrical resistivity (ρ) were measured fro
Mat. Res.. Publicado em: 26/02/2016
-
12. Evaluation of decomposition kinetics of poly (ether-ether-ketone) by thermogravimetric analysis
The non-isothermal thermogravimetric methods have been used extensively for the determination of kinetic parameters in polymers. The poly (ether ketones) are used as matrix in advanced high performance composites due its high thermal stability, excellent environmental performance and superior mechanical properties. In this work, the non-isothermal decomposit
Mat. Res.. Publicado em: 17/12/2013