Dental Abutments
Mostrando 1-12 de 34 artigos, teses e dissertações.
-
1. Influence of Abutment Collar Height and Implant Length on Stress Distribution in Single Crowns
Resumo Este estudo avaliou a influência da altura da porção transmucosa do pilar protético com junção cone morse e do comprimento dos implantes no comportamento biomecânico coroas unitárias com diferentes proporção coroa-implante. Seis modelos virtuais (S11, M11, L11, S13, M13 e L13) foram construídos combinando pilares protéticos com transmucoso
Braz. Dent. J.. Publicado em: 03/06/2019
-
2. Short-term quality of life change perceived by patients after transition to mandibular overdentures
Abstract The aim of this longitudinal observational study was to evaluate the oral health-related quality of life (OHRQoL) following patient rehabilitation with implant-retained mandibular overdentures (IMO) and to identify the contribution of the different domains to OHRQoL. The Oral Health Impact Profile (OHIP-EDENT), Dental Impact on Daily Living (DIDL),
Braz. oral res.. Publicado em: 10/03/2017
-
3. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology
The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs) (Y-TZP - LAVA, 3M-ESPE), using a novel methodology based on micro-computed tomography (micro-CT) technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced wi
Braz. oral res.. Publicado em: 2013-09
-
4. Estudo in vitro de um material para selamento da interface implante-intermediário do tipo minipilar cônico em implantes de hexágono externo, hexágono interno e cone morse / In vitro sealing of a material of implant-abutment interface of mini conical pillar: inimplant external hexagon, internal hexagon and Morse taper
Microbial and fluidic leakage in the implant-abutment interface are shown in literature through a variety of studies, accusing the space that exists between the components of the implant, called \"GAP\", which seems to be the source of the microorganism infiltration, either from the external to the internal environment or the inverse, resulting in inflammato
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/05/2012
-
5. RESISTÊNCIA À FRATURA DE PILARES DE PRÓTESES FIXAS RESTAURADOS COM NÚCLEO DIRETO E INDIRETO EM MANDÍBULAS DE SUÍNOS / FRACTURE STRENGTH OF FIXED PARTIAL DENTURES ABUTMENTS RESTORED WITH DIRECT AND INDIRECT CORE IN SWINE JAW
O objetivo deste estudo foi comparar a resistência à fratura de pilares de próteses parciais fixas (PPFS) restaurados com núcleo em dentina, com pino de fibra de vidro e resina composta e com núcleo metálico fundido; analisar o tipo de fratura (reparável ou irreparável) e verificar a sua relação com o tipo de núcleo utilizado. Foram utilizados 15
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/03/2012
-
6. Morse taper implants at different bone levels: a finite element analysis of stress distribution
AIM: To explore the biomechanical effects of the different implantation bone levels of Morse taper implants, employing a finite element analysis (FEA). METHODS: Dental implants (TitamaxCM) with 4x13 mm and 4x11 mm, and their respective abutments with 3.5 mm height, simulating a screwed premolar metal-ceramic crown, had their design performed using the softwa
Braz. J. Oral Sci.. Publicado em: 2012-12
-
7. Connecting accuracy of interchanged prosthetic abutments to different dental implants using scanning electron microscopy
O presente estudo avaliou a intercambiabilidade dos componentes protéticos de implantes de hexágono externo medindo-se a precisão da interface implante/pilar com microscopia eletrônica de varredura. Foram utilizados dez implantes para cada uma de três marcas (SIN, Conexão, Neodent) com seus respectivos pilares (base metálica de CoCr , rotacional e nã
Braz. Dent. J.. Publicado em: 2012-10
-
8. Análise quantitativa do corante azul de Evan extravasado do interior das câmaras internas dos implantes por suas interfaces protéticas nas condições: Hexágono Externo (HE) - Hexágono Interno (HI) - Cone Morse (CM) / Quantitative analysis of Evans blue dye leakage from internal implant chambers through their prosthetic interfaces under the following conditions: External Hexagon (HE) Internal Hexagon (IH) Morse Cone (MC)
Research and studies seek to evaluate the capacity of adaptation and sealing between the implant-intermediate connections of different dental implant systems. It has recently been observed that in implants with screw-retained abutments, various phenomena, such as screw4 loosening and fracture, rotation and fracture of the abutment with bacterial penetration
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/09/2011
-
9. A rationale method for evaluating unscrewing torque values of prosthetic screws in dental implants
OBJECTIVES: Previous studies that evaluated the torque needed for removing dental implant screws have not considered the manner of transfer of the occlusal loads in clinical settings. Instead, the torque used for removal was applied directly to the screw, and most of them omitted the possibility that the hexagon could limit the action of the occlusal load in
Journal of Applied Oral Science. Publicado em: 2011-02
-
10. Linear dimensional changes in plaster die models using different elastomeric materials
Dental impression is an important step in the preparation of prostheses since it provides the reproduction of anatomic and surface details of teeth and adjacent structures. The objective of this study was to evaluate the linear dimensional alterations in gypsum dies obtained with different elastomeric materials, using a resin coping impression technique with
Brazilian Oral Research. Publicado em: 2010-09
-
11. Machined and plastic copings in three-element prostheses with different types of implantabutment joints: a strain gauge comparative analysis
OBJECTIVE: Using strain gauge (SG) analysis, the aim of this in vitro study was quantify the strain development during the fixation of three-unit screw implant-supported fixed partial dentures, varying the types of implant-abutment joints and the type of prosthetic coping. The hypotheses were that the type of hexagonal connection would generate different mic
Journal of Applied Oral Science. Publicado em: 2010-06
-
12. Evaluation of abutment and perimplantar region deformation of implant-supported screwed prostheses: an study using strain gauges / Avaliação da deformação do intermediário e região perimplantar de próteses implanto-suportada unitárias parafusada: estudo através da extensometria
The dental implant depends on the supporting bone for its stability and functional longevity. Mechanical behavior and trabecular bone structure affect the interface with the implant. Such knowledge may provide a basis for improvements in the current implant function and design, decreasing bone crest resorption and failure at bone-implant junction. Adequate q
Publicado em: 2010