Deformations And Tensions
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Mechanical Properties Analysis of Al2024 alloy Submitted to Different Aging Time and different Cold Plastic Deformation degree
Brazilian aeronautical industries report that, due to the high mechanical properties presented commercially, AA2024-T351 alloy presents fissures and non-homogeneous deformations during the mechanical processing. This work proposes a manufacturing process capable of increasing the ductility of the material to withstand tensions during processing and a subsequ
Mat. Res.. Publicado em: 10/07/2019
-
2. Analyses of reinforced concrete beams strengthened with CFRP under bending: theorical and computational approaches
Resumo Este trabalho tem como objetivo compilar o embasamento teórico do ACI 440.2R:2008 [1] com o da NBR 6118:2014 [2] a fim de levar em consideração os conceitos da norma brasileira no dimensionamento à flexão de vigas reforçadas com PRFC (Polímeros Reforçados com Fibra de Carbono). A contribuição da norma brasileira é dada particularmente no qu
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
3. Study of tension in the periodontal ligament using the finite elements method
Orthodontic movement is process of transformation of a physical stimulation into a force applied to a tooth, with a biological response identified as bone remodelling. Although it is possible to measure the force applied on a tooth, its distribution around the root is irregular forming areas of higher concentration of tensions, which do not correspond to the
Dental Press Journal of Orthodontics. Publicado em: 2012-02
-
4. Estudo geoestrutural do maciÃo de Granito Vermelho Frevo SertÃnia-PE
The purpose of this report is to recommend a new methodology for prospecting ornamental rocks massifs. This is why it is important to supply the technical staff, for the future operations of mining of knowledgement of the petrographic and physical-mechanical features of the rock to be extracted and the regime of tensions to be submitted to define the best sy
Publicado em: 2008
-
5. Modelagem computacional de um reator anaeróbico fabricado em polietileno de alta densidade rotomoldado / Computational modeling of a anaerobic reactor manufaturated in polyethilene of high density rotomolding
The present work was developed to evaluate the potential of uses of an anaerobic reactor manufactured in HDPE High Density Polyethylene produced by the rotomolding process in substitution to the conventional reactors built in stonemasonry, working in a batch regime and buried in the soil. The state of tensions and the deformations were assessed using the pro
Publicado em: 2007
-
6. CONECTOR DE CISALHAMENTO EM PERFIL FORMADO A FRIO: ANÁLISE VIA MODELAGEM COMPUTACIONAL
In a composite system, a steel beam (laminated, welded or cold formed) is associated with a concrete slab, forming a composite beam. The interaction between concrete and steel can be mechanical, by friction or, in some cases, only by adherence. One of the major advantages of the composite beams is the increase in strength and stiffness due to association of
Publicado em: 2006
-
7. Estudo teórico-experimental da ligação pilar-fundação por meio de cálice em estruturas de concreto pré-moldado / Theoretical-experimental analysis of column-foundation connection through socket of precast concrete structures
This research presents a theoretical-experimental analysis of column-foundation connection through socket of precast concrete structures, with emphasis in pedestal walls. The experimental program included five models submitted to normal load with large eccentricity, changing the type and the condition of interface: three models had smooth interface and two m
Publicado em: 2004
-
8. DEFORMABILITY AND STABILITY OF SLOPES SUPPORTED BY SOIL NAILING / DEFORMABILIDADE E ESTABILIDADE DE TALUDES EM SOLO GRAMPEADO
Deformability and stability of slopes supported by soil nailing are relevant aspects in the utilization of this reinforcement system during excavation. The project concept involves choosing the installation angle, spacing, and resistance of the soil nails. The parameters, usually determined from Limit Equilibrium Theory, cannot predict the deformation of the
Publicado em: 2002