Deep Rolling
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Investigation of Deep Cold Rolling Effects on the Bending Fatigue of Brass C38500
Abstract In this paper, the effects of deep cold rolling (DCR) process on the bending fatigue behavior of brass C38500 are investigated. Unilateral rotary bending fatigue tests were conducted by an automatic device on the basis of Moore rotary bending instrument. The treatment was done for various rolling depths (rolling forces) and one repeated pass to fin
Lat. Am. j. solids struct.. Publicado em: 04/06/2018
-
2. An axisymmetric nodal averaged finite element
Abstract A nodal averaging technique which was earlier used for plane strain and three-dimensional problems is extended to include the axisymmetric one. Based on the virtual work principle, an expression for nodal force is found. In turn, a nodal force variation yields a stiffness matrix that proves to be non-symmetrical. But, cumbersome non-symmetrical ter
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
3. Dislocation Density and Texture in Copper Deformed by Cold Rolling and Ecap
Analysis of dislocation density in metallic materials has been pursued with great interest for many years because dislocations are closely associated with plastic deformation and thus exert a deep effect on the mechanical properties of any material. Crystallographic texture has also a decisive influence in some properties. In this work, the dislocation densi
Mat. Res.. Publicado em: 23/10/2017
-
4. Simulação computacional, projeto, construção e análise do desempenho de uma matriz para extrusão em canal angular dedicada ao processamento de chapas / Computational simulation, design, construction and performance analysis of an equal channel angular pressing die for the processing of flat billets
The present work describes the design, construction and testing of an equal channel angular pressing (ECAP) die characterized by rectangular cross section channels. The main parameter of the ECAP dies is the geometry of the channels, given by the angle trough which they meet, and the curvature radii at this point. The material employed in the experiments was
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/08/2012
-
5. Aumento da vida em fadiga por meio do processo de roleteamento profundo para geração de tensão residual compressiva
Este trabalho comprovou a eficácia do processo de roleteamento profundo no aumento da vida em fadiga em eixos submetidos ao ensaio de fadiga sob tensão axial. Uma pesquisa bibliográfica extensa foi realizada para o entendimento do comportamento físico do fenômeno encruamento, onde esta pesquisa abrangeu a metalurgia, plasticidade e elasticidade dos mate
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/04/2012
-
6. Otimização do corte de pontas de um aço livre de intersticiais laminado a quente usando tesoura do tipo guilhotina / Optimization the cut edge of a hot rolled interstitial free steel using a guillotine type shearing machine
The automotive industry\ s demand for high formability steels for use in exposed body panels motivated the development of several interstitial free (IF) steels specifications at Companhia Siderurgica Nacional. The \"IF-Ti\" steel specification belongs to the special deep drawing steels group (CSN EEP-IF), with yield strength <380 MPa, and among all grades of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/02/2011
-
7. Estudo comparativo da estampabilidade da liga de aluminio AA1050 partindo de placas obtidas por vazamento direto e bobinas obtidas por vazamento contínuo. / Comparative study of the deep drawing alloy AA1050 from plates obtained by direct casting and coils obtained by continuos casting.
Stampability of aluminum alloys is a subject of interest to several industrial sectors because they are largely used in the fabrication of several parts and components. The choice is based upon the stampability and the relative manufacturing capability in relation to other aluminum alloys that contain larger amounts of alloying elements and, consequently, hi
Publicado em: 2010
-
8. Estudo sobre a vida útil de rolamentos fixos de uma carreira de esferas. / Study about rolling bearing life of deep groove ball bearings.
O presente trabalho destina-se à discussão sobre o cálculo de vida útil de rolamentos. Mostrando o avanço do processo de cálculo ao longo das décadas até o mais alto grau de desenvolvimento atual. A preocupação do texto é demonstrar de forma simples e objetiva as divergências que existem entre a formulação teórica e a real vida dos rolamentos,
Publicado em: 2007
-
9. Surface processing to improve the fatigue resistance of advanced bar steels for automotive applications
With the development of new steels and processing techniques, there have been corresponding advances in the fatigue performance of automotive components. These advances have led to increased component life and smaller power transfer systems. New processing approaches to enhance the fatigue performance of steels are reviewed with an emphasis on carburizing an
Materials Research. Publicado em: 2005-12
-
10. Evolução da microestrutura e da textura durante o processamento de chapas da liga Al-Mn-Fe-Si (3003) produzidas por lingotamento contínuo: um estudo comparativo com o processo semi-contínuo. / Microstructure and texture evolution of the Al-Mn-Fe-Si (3003) aluminum alloy produced from continuous casting process: comparative analysis with semi-continuous casting process.
The main reason for the development of this PhD Thesis was to compare the microstructures and textures of the 3003 aluminum alloy produced from continuous and semi-continuous casting processes. The roll caster process (continuous casting) has been increasingly used in the aluminum industry. Products usually obtained by means of heavy rolling operations in th
Publicado em: 2005
-
11. Adequabilidade das CondiÃÃes de LaminaÃÃo de um AÃo Baixo-Carbono à Estampagem Profunda / Suitability of the Terms of Rolling a Low-Carbon Steel Stamping the Deep
Dependendo da direÃÃo em que sÃo medidas, algumas propriedades dos materiais policristalinos se apresentam diferenciadas. Isso se deve a existÃncia de textura, ou seja, direÃÃes preferenciais dos cristais no material. Esta caracterÃstica pode ser decorrente da solidificaÃÃo de um processo de deformaÃÃo plÃstica ou de um tratamento tÃrmico. A tex
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/12/2003
-
12. Response of Leaf Water Potential, Stomatal Resistance, and Leaf Rolling to Water Stress
Numerous studies have associated increased stomatal resistance with response to water deficit in cereals. However, consideration of change in leaf form seems to have been neglected. The response of adaxial and abaxial stomatal resistance and leaf rolling in rice to decreasing leaf water potential was investigated. Two rice cultivars were subjected to control