Dcp
Mostrando 1-12 de 165 artigos, teses e dissertações.
-
1. Use of blood residue as alternative source of phosphorus in sunflower (Helianthus annuus L.) cultivation
RESUMO Objetivou-se com este trabalho verificar biometria de parte aérea, rendimento de aquênios de plantas de girassol sobre o efeito de doses crescentes de resíduo de sangue, como fonte alternativa de fósforo (P), em um Latossolo vermelho de textura argilosa. O delineamento experimento utilizado foi o de blocos casualizados, com seis tratamentos e quat
Arquivo Brasileiro de Medicina Veterinária e Zootecnia. Publicado em: 2022
-
2. OS EFEITOS DAS IMAGENS SOBRE A DISPOSICÃO A PAGAR POR INGRESSOS DAS ATRAÇÕES TURÍSTICAS
RESUMO: O objetivo deste estudo foi medir a Disposição dos Consumidores a Pagar (DCP) por ingressos em atrações turísticas que eles nunca haviam visitado anteriormente, depois de visualizar imagens de atração turística como as mostradas no Instagram, por exemplo. Este artigo avaliou os possíveis efeitos das imagens na disposição dos jovens a pagar
Tur., Visão e Ação. Publicado em: 2021-08
-
3. Resultado funcional dos pacientes submetidos a artrodese de joelho após artroplastia total infectada
Resumo Objetivo Avaliar de modo retrospectivo o resultado funcional dos pacientes submetidos a artrodese após falha séptica da artroplastia total de joelho. Métodos Foram avaliados 18 pacientes com tempo médio de 3,7 anos de seguimento. A cirurgia de artrodese foi realizada com placa do tipo dynamic compression plate (DCP) estreita, anterior e medial,
Rev. bras. ortop.. Publicado em: 2021-05
-
4. Translation of the quality-of-life measure for adults with primary ciliary dyskinesia and its application in patients in Brazil
RESUMO A discinesia ciliar primária (DCP) é uma doença genética de origem comumente autossômica recessiva. Caracteriza-se clinicamente por infecções respiratórias de repetição; porém, a repercussão na qualidade de vida desses pacientes deve ser levada em consideração. Estudos têm demonstrado um importante impacto da doença nesse quesito, mas
J. bras. pneumol.. Publicado em: 29/04/2019
-
5. Efeito das variáveis reacionais na síntese de um polímero biodegradável funcionalizado: PCL-g-MA
RESUMO A Poli(ɛ-caprolactona) (PCL) é um termoplástico sintético biodegradável que tem sido foco de estudos em novos “polímeros verdes”, devido principalmente as suas boas propriedades mecânicas, o que a torna competitiva com outros polímeros convencionais e biopolímeros, tais como: Poli(ácido lático) (PLA), Poli(hidroxibutirato) (PHB). O obje
Matéria (Rio J.). Publicado em: 06/12/2018
-
6. Measurement of Residual Stresses in Welded Joints by DCP Method
Residual stresses on welded joints have been studied by several methods. In this present work, residual stresses was measured by a novel methodology under development named Displacement of Coordinated Points (DCP). To evaluate anisotropy effects in steel plates, two directions of the weld bead were considered: Welding was performed in both parallel and trans
Mat. Res.. Publicado em: 16/07/2018
-
7. Characterization of additives in NR formulations by TLC-IR (UATR)
Abstract It is a well-established fact that rubber accelerator is essential to provide solution in different sectors. However, there is a reversal process which can reduce the material performance. Sulfur accelerators donors and organic peroxides have been presented as a solution to the problem. The methodology development that can separate or characterize
Polímeros. Publicado em: 10/07/2018
-
8. The Back Stress Behavior Study Analyzed in Residual Stress of Welded Naval Plates in Different Lamination Directions and Different Thermal Contributions
The lamination process adds the anisotropy characteristic in the final product. This anisotropy influences the yield strength according to the direction in question, the difference between the value of the yield tension in one direction and the value of the yield tension in another direction referred to as the back stress. Naval plates were welded by the GMA
Mat. Res.. Publicado em: 18/12/2017
-
9. Welded Joints' Heat Affected Zone's Extension Prediction by Switching Welding Parameters
Choosing welding parameters is an important step in welding process, directly influencing in the heat input provided to welded joints. This heat input value, along with temperature distribution in welded joints, provides, to the drafter, conditions of predicting the Heat Affected Zone (HAZ) extension, the kind of microstructure to be formed, and therefore, t
Mat. Res.. Publicado em: 30/11/2017
-
10. Thermal and Mechanical Properties of Vinyltrimethoxysilane (VTMOS) Crosslinked High Molecular Weight Polyethylene (HMWPE)
The use of polyethylene in sliding systems for automotive industry requires adequate mechanical properties, such as high wear resistance, besides good processing properties in conventional extrusion processes. Aiming to fulfill these requirements, crosslinks were introduced in a high molecular weight polyethylene (HMWPE) grade through a process involving gra
Mat. Res.. Publicado em: 27/07/2017
-
11. Effect of Cupric Salts (Cu (NO3)2, CuSO4, Cu(CH3COO)2) on Cu2(OH)PO4 Morphology for Photocatalytic Degradation of 2,4-dichlorophenol under Near-infrared light irradiation
Cu2(OH)PO4 microstructures were synthesized by the hydrothermal method using three different types cupric salts (Cu (NO3)2, CuSO4, Cu(CH3COO)2) as raw materials. The X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible-NIR absorption spectra were used to characterize the as-obtained products. The different anions (SO42-, CH3COO-, NO3-)
Mat. Res.. Publicado em: 26/01/2017
-
12. O sistema convencional de placa e parafusos na osteotomia tibial alta em cunha de abertura medial é suficientemente estável? Um estudo retrospectivo
RESUMO Objetivo: A osteotomia em cunha de abertura da tíbia proximal é um procedimento amplamente feito para o tratamento da gonartrose medial em pacientes ativos e na presença de mau alinhamento em varo do membro inferior. O método de fixação é controverso e o uso de implantes convencionais foi substituído pelo uso de implantes com parafusos de blo
Rev. bras. ortop.. Publicado em: 2017