Curing Under Stress
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. Análisis comparativo de las propiedades mecánicas de un material compuesto reforzado con fibras de carbono y las de su matriz polimérica de resina epóxica
ABSTRACT In recent years composite materials have been developed for different applications in engineering areas. This paper first presents the tensile properties of a polymer, in this case an epoxy resin, to be used as the matrix of a fiber reinforced composite material. A study of the mechanical properties is presented, which was carried out by performing
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Hybrid Nanocomposites Based on Epoxy/silsesquioxanes Matrices Reinforced with Multi-walled Carbon Nanotubes
The aim of this work was the synthesis of hybrid organic-inorganic epoxy-copolysilsesquioxane nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Copolysilsesquioxanes oligomers from 3-aminopropyltriethoxysilane (APTES) and phenyltriethoxysilane (PTES) precursors have been synthesized by a sol-gel process and chemically incorporated to an e
Mat. Res.. Publicado em: 24/11/2015
-
3. Análise fotoelástica da tensão de contração da polimerização de compósitos resinosos sob influência de técnicas restauradoras / Photoelastic analysis of polymerization shrinkage stress of composites under the influence of restorative techniques
Polymerization shrinkage stress is an undesirable and inevitable characteristic of adhesive restorations. It is important to understand the stress distribution to improve the clinical effectiveness of resin composite restoration. Chapter 1: The aim was to evaluate the polymerization shrinkage stress and degree of conversion of a resin composite material subm
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/06/2011
-
4. Resistência e deformabilidade de blocos vazados de concreto, prismas e paredes e suas correlações com as propriedades mecânicas dos materiais constituintes / Strength and deformability of hollow concrete blocks, prisms and walls and their correlation to mechanical properties of constituent materials
This work aims to identify and correlate the mechanical properties of concrete and bedding mortar to the structural behavior of hollow concrete blocks, prisms and walls, by mean of physical and numerical modeling. A detailed experimental investigation was carried out by assuming as a premise the use of plastic consistency concrete to produce hollow blocks an
Publicado em: 2008
-
5. Comportamento mecânico de um solo cimentado curado sob tensão em ensaios triaxiais / Mechanical behaviour of a cemented soil cured under stress in triaxial tests
O comportamento de solos estruturados por cimentação é fortemente influenciado pelo estado de tensões existente durante a deposição do agente cimentante. Procedimentos rotineiros de extração e preparação de amostras em laboratório geralmente causam danos à estrutura natural do material, impedindo, muitas vezes a observação do comportamento real
Publicado em: 2007
-
6. Plastificação de um solo cimentado curado sob tensão / Yielding of a Cemented Soil cured under Stress
A fim de avaliar a contribuição das ligações cimentantes no comportamento tensão-deformação dos solos cimentados, bem como quantificar a variação das tensões de início de plastificação e incremento de tensão de plastificação em função do índice de vazios de cura, foram realizados dezoito ensaios de compressão isotrópica em amostras artif
Publicado em: 2007
-
7. The Curing Agent Sodium Nitrite, Used in the Production of Fermented Sausages, Is Less Inhibiting to the Bacteriocin-Producing Meat Starter Culture Lactobacillus curvatus LTH 1174 under Anaerobic Conditions
Curvacin A is a listericidal bacteriocin produced by Lactobacillus curvatus LTH 1174, a strain isolated from fermented sausage. The response of this strain to an added curing agent (sodium nitrite) in terms of cell growth and bacteriocin production was investigated in vitro by laboratory fermentations with modified MRS broth. The strain was highly sensitive
American Society for Microbiology.