Crystallinity
Mostrando 1-12 de 366 artigos, teses e dissertações.
-
1. Synthesis of delafossite CuCrO2 via solution combustion method and its acid functionalization for biodiesel production
Abstract CuCrO2 was synthesized by solution combustion synthesis (SCS) and applied as a heterogeneous catalyst to produce soybean biodiesel. The combustion reaction was carried out using urea as a fuel, and copper (II) and chromium (III) nitrates as precursors. After the powders’ obtention, these were calcined and functionalized in an acidic medium. The po
Cerâmica. Publicado em: 2023
-
2. Phase transformation of kaolinite to hexagonal kalsilite using K2CO3
Abstract Hydrothermal synthesis of kalsilite was facilitated by the inclusion of potassium carbonate (K2CO3) as the source of the potassium ion. After a 24 h reaction at 220 °C, kaolin clay treated with 1.25 M K2CO3 showed the most significant peaks at 2θ of 28.5° and 34.7° by X-ray diffraction corresponding to the hexagonal kalsilite. In addition, field
Cerâmica. Publicado em: 2022
-
3. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022
-
4. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
5. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
6. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
7. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
8. Optimization and Study of the Response Surface of Properties for the Synthesis of ZSM-5 Zeolites with Hierarchical Pore Structure Obtained by Desilication
Hierarchical ZSM-5 zeolites were prepared by alkali treatment (desilication) at two temperatures, two reaction times, and two NaOH concentrations. A 23 factorial design was used to study the effect of these variables on the crystallinity, microporosity, and mesoporosity of the zeolite due to the desilication treatment. The factorial design analysis showed th
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
9. Expansibility of vermiculite (Santa Luzia, Brazil) irradiated with microwave
Abstract The effect of microwave heating on the expansion of vermiculite was studied at a level of 700 W for 4 min exposure time and compared with raw vermiculite. In this study, the characterization of vermiculite from a mine in the northeast region of Brazil was performed using thermogravimetry, N2-adsorption, cation exchange capacity, X-ray powder diffrac
Cerâmica. Publicado em: 2021-06
-
10. Effect of pH level and calcination on the production of calcium phosphates by acidic route of wet precipitation
Abstract Multiphasic calcium phosphate powders were synthesized by the acidic route, using lactic acid as a chelating agent that allows the production of a stable and rich solution of calcium and phosphate ions at room temperature. After pH adjusting, without varying the concentrations of precursor solution, XRD and FTIR analyses showed different CaP phases
Cerâmica. Publicado em: 2021-06
-
11. Agroindustry Residues as a Source for Cellulose Nanofibers Production
Our study was motivated by the large amount of crop residues produced in Brazil, which represent underutilized waste biomass and a serious threat to the environment because of the landfilling. For example, even though the corn crop is not popular in Brazil, it is produced in the area of around 18-20 million hectares with an average production of 5-6 t ha-1.
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
12. Synthesis and characterization of niobium-doped fish scale-derived hydroxyapatite by physical ultrasound interference
Abstract Fish scales of the Arapaima gigas (pirarucu) species were heat-treated to obtain natural hydroxyapatite (HAp), and it was doped with niobium (Nb) by physical ultrasound interference to confirm an effective route to the production of Nb-doped HAp powders. The effect of ultrasound application on doping was investigated. The structure of the powders wa
Cerâmica. Publicado em: 2021-03