Copolymer
Mostrando 1-12 de 425 artigos, teses e dissertações.
-
1. SELECTIVE SEPARATION OF Mn(II) AND Cd(II) AS WELL AS REGENERATION OF POLYMER VIA SHEAR INDUCED DISSOCIATION COUPLING WITH ULTRAFILTRATION
Abstract The selective separation of Mn(II) and Cd(II) as well as regeneration of the complexing agent were conducted by shear induced dissociation coupling with ultrafiltration (SID-UF), and the copolymer of maleic acid and acrylic acid (PMA) was used as complexing agent. At the optimal complexation conditions, pH 6 and P/M (mass ratio of polymer to metal i
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Does the sequence of addition of herbicide and adjuvants to the spray solution influence sicklepod control?
RESUMO O uso de adjuvantes associados a herbicidas visa melhorar o desempenho da aplicação e o consequente aumento do efeito biológico do tratamento. Porém, a ordem de adição dos produtos ao tanque do pulverizador pode trazer importantes influências à calda fitossanitária. Assim, o objetivo desta pesquisa foi avaliar o controle de Senna obtusifolia
Arq. Inst. Biol.. Publicado em: 28/11/2019
-
3. SPRAY RETENTION ON COFFEE LEAVES ASSOCIATED WITH TYPE AND CONCENTRATION OF ADJUVANTS
ABSTRACT Agricultural spray adjuvants (ASA) are widely used in pesticide applications to enhance the performance of pesticides. The aim of this research was to investigate the effects of ASA on static surface tension (SST) and foliar spray retention on coffee leaves. The SST of ASA at different concentrations was determined by the drop weight method. Spray r
Eng. Agríc.. Publicado em: 04/11/2019
-
4. A Sustainable Methodology to Extract Bismuth from Secondary Sources
Bismuth is a critical metal broadly used in cosmetic, medicine and metallurgy. However, its scarcity in Earth’s crust may impair further applications. An alternative is to recover bismuth from secondary sources. In this work, a methodology to extract bismuth from safety valves of discharged gas cylinders is proposed. Extraction and purification of bismuth
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
5. SBSE(EG-Silicone)-UFLC-MS/MS and HPLC-Flu Analysis of Norharman in Passiflora edulis Rinds
Previous studies on Passiflora edulis (sour passion fruit) rinds reported some biological activities and there is a growing interest on rinds flour as a possible functional food, but its alkaloid composition was not detailed investigated. This work reports on for the first time in the literature the identification of norharman in P. edulis rinds, by using st
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
6. Grafting polypropylene over hollow glass microspheres by reactive extrusion
Abstract Hollow glass microspheres HGM are light, round, hollow, hydrophilic microspheres used to produce polyolefin composites with reduced density. To maintain mechanical strength, it is necessary to improve the adhesion between the polymer matrix and the microspheres, which is done by a compatibilizer. For polypropylene composites a maleic anhydride graft
Polímeros. Publicado em: 10/10/2019
-
7. Tank mixture of pesticides and foliar fertilizers for Triozoida limbata control in guava trees (Psidium guajava L.)
ABSTRACT Although tank mixture of pesticides and foliar fertilizers is common practice in agriculture, further clarification and scientific evidence is needed to support regulation. Thus, the objective of this work was to evaluate the effect of tank mixing an organosilicon adjuvant and manganese foliar fertilizer on the insecticide imidacloprid effectiveness
Rev. Ceres. Publicado em: 03/10/2019
-
8. Sulfonated Styrene-Acrylic Acid Copolymers with pH-Indicator Property
In this study, a polymer pH-indicator was synthesized by sulfonation of poly(styrene-co-acrylic acid) with concentrated sulfuric acid. The synthesized polymer pH-indicator exhibited pH-responsive color changes in aqueous solutions, being purple in alkaline medium (pH < 4), whereas yellow in acidic medium (pH > 9). The sulfonation process extent and polymer c
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
9. Obtenção e caracterização de copolímeros de Poliacrilonitrila (PAN) para uso em processos de fiação em extrusora
RESUMO A disponibilidade de novos materiais, processos e equipamentos sempre traz perspectivas favoráveis ao mercado. A busca por processos alternativos e pela redução do custo da obtenção de precursores de materiais de alto desempenho tem se tornado primordial para o desenvolvimento do setor industrial de produtos com valores mais acessíveis, visando
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Avaliação do efeito do agente compatibilizante (PP-g-MA) em misturas PP/Amido termoplástico
RESUMO O crescente desperdício de materiais plásticos no meio ambiente juntamente com a preocupação com a futura escassez do petróleo tem aumentado o interesse por polímeros biodegradáveis, como o amido. Nos últimos anos, o amido tem sido utilizado em misturas com diferentes polímeros sintéticos. Essas misturas têm sido compatibilizadas por meio d
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Effect of Pesticide Addition Sequence on the Preparation of Phytosanitary Spray Solutions
RESUMO: A adição de adjuvantes às caldas herbicidas visa preservar ou aumentar o efeito biológico do tratamento, porém é comumente realizada sem conhecimento das interações físico-químicas entre os produtos. Assim, objetivou-se neste trabalho avaliar os efeitos sobre a tensão superficial e o ângulo de contato decorrentes de diferentes sequências
Planta daninha. Publicado em: 09/09/2019
-
12. Micellar propolis nanoformulation of high antioxidant and hepatoprotective activity
ABSTRACT The present study reports a promising antioxidant protection by a recently developed micellar propolis formulation, against oxidative stress in in vitro and in vivo models of toxicity. The formulation, based on poplar propolis encapsulated in poly(ethylene oxide)–β-poly(propylene oxide)–β-poly(ethylene oxide) triblock copolymer (PEO26–PPO40�
Rev. bras. farmacogn.. Publicado em: 26/08/2019