Cooling Process
Mostrando 1-12 de 277 artigos, teses e dissertações.
-
1. Behavior of the effective heat transfer coefficient and global thermal resistance in freezing of fruit juice model solutions in cylindrical packages
Abstract In this study the effect of packing on freezing time, effective heat transfer coefficient and global thermal resistance were evaluated during the freezing of fruit juice model solution in an air blast freezer. Two configurations were arranged with 40 buckets and 15 kg of solution in each, totaling 600 kg. Thermocouples were installed to monitor the
Food Sci. Technol. Publicado em: 2020-12
-
2. 3D numerical investigation of mixture formation and combustion in a DISI engine at part-load under stratified operation
This work investigates through numerical simulation, the operation of a big bore direct fuel injection spark ignition engine, at part load under stratified operation. It evaluates fuel-air mixture preparation and combustion process with the adoption of detailed chemical kinetics mechanisms for both Isooctane and Ethanol, and applying adaptive mesh refinement
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2020
-
3. Austenitic Grain Size Prediction in Hot Forging of a 20MnCr5 Steel by Numerical Simulation Using the JMAK Model for Industrial Applications
Yield strength and toughness in steels are directly associated with hot forging processes, especially by controlling austenitic grain size and cooling conditions. The phenomenological JMAK model in macroscale has been applied in different material classes to predict grain size after hot forming. However, on an industrial application, there is still a lack of
Mat. Res.. Publicado em: 05/12/2019
-
4. Reproductive physiology of the heat-stressed dairy cow: implications for fertility and assisted reproduction
Abstract Heat stress causes a large decline in pregnancy success per insemination during warm times of the year. Improvements in fertility are possible by exploiting knowledge about how heat stress affects the reproductive process. The oocyte can be damaged by heat stress at the earliest stages of folliculogenesis and remains sensitive to heat stress in the
Anim. Reprod.. Publicado em: 28/11/2019
-
5. Avaliação de desvio dimensional em Inconel 718 após a retificação em diferentes técnicas de lubri-refrigeração
RESUMO O Inconel 718 é uma liga à base de níquel que possui elevada resistência à fadiga e à fluência, ductilidade, rigidez, inércia química e capacidade de operar em elevadas temperaturas, por isto é bastante utilizada na fabricação de peças aeronáuticas de alto rendimento. Estas peças exigem tolerâncias dimensionais e geométricas estreitas
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. Thermal Dissipation Effect on Temperature-controlled Friction Stir Welding
Resumo Durante a Soldagem por Fricção linear (FSW) de geometrias complexas, a dissipação térmica, induzida por características geométricas ou pelo ambiente circundante, desempenha um papel importante na qualidade final da junta. Para garantir uma qualidade consistente em condições diferentes é necessário a adaptacão de parâmetros durante o proce
Soldag. insp.. Publicado em: 25/11/2019
-
7. Characterization of Austenite Decomposition in Steels with Different Chemical Concepts and High Potential to Manufacture Seamed Pipes for Oil and Gas Industry
This work presents the characterization of austenite decomposition kinetics in two steels during continuous cooling considering non-deformed austenite grains. Two different chemical concepts of steels were evaluated: low carbon - high manganese and a relatively new concept based on low carbon - low manganese - high niobium contents. Dilatometric experiments,
Mat. Res.. Publicado em: 21/10/2019
-
8. Proposição de um Modelo Empírico para Determinação das Temperaturas Críticas Durante Resfriamento Contínuo em Zonas Termicamente Afetadas de Aços IF Soldados pelo Processo TIG
Resumo Aços IF são amplamente empregados na indústria automobilística. No decorrer das aplicações de soldagem, eles passam pela transformação de fase austenita (γ) → ferrita (α) que ocorre por nucleação e crescimento de grão e, em condições isotérmicas, é descrita pela equação JMAK. Todavia, as transformações de fases pós-soldagem ac
Soldag. insp.. Publicado em: 23/09/2019
-
9. Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
Droplet atomization characteristics and its morphology in twin-wire arc sprayed (TWAS) Ni-Al were explored in depth. Both numerical model and theoretical method were built for calculating the process of the droplet deformation and breakup in air flow, which based on the standard k-ε model and the volume of fluid (VOF) dual-phase flow model. The atomization
Mat. Res.. Publicado em: 23/09/2019
-
10. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
11. Modification of the Crystalline Structure of ZnO Nanoparticles Embedded Within a SiO2 Matrix due to Thermal Stress Effects
Self-assembled nanocrystals of ZnO were embedded within a SiO2 matrix by a sequential deposit using reactive R.F. sputtering. The ZnO nanoparticles (NP’s) were obtained by depositing a very thin layer (~20 nm) of Zn on the bottom of the valleys of a first SiO2 rough surface and then covered by another SiO2 layer at 500 ºC. The stress produced, due to the
Mat. Res.. Publicado em: 23/09/2019
-
12. Crystallization kinetics of poly (butylene adipate terephthalate) in biocomposite with coconut fiber
RESUMO Os parâmetros da cristalização a partir do fundido de um composto de fibras lignocelulósicas de côco dispersas em poli (butileno adipato tereftalato) (PBAT), uma matriz de copoliéster totalmente biodegradável, foi estudada por calorimetria exploratória diferencial (DSC). Os compostos de PBAT/fibra de côco com 10% e 20% de fibra foram preparad
Matéria (Rio J.). Publicado em: 16/09/2019