Conventional Process
Mostrando 13-24 de 974 artigos, teses e dissertações.
-
13. ToF-SIMS Characterization of Nanostructured ZrO2 Coatings Applied to Near Equiatomic Ni-Ti Alloy
The ToF-SIMS technique was applied to analyze thin ZrO2 coatings deposited on the surface of a Ni-Ti alloy. Due to its nanostructured nature, these films are difficult to characterize by conventional techniques. ZrO2 coatings were deposited on near equiatomic Ni-Ti wires by pulse electrodeposition. Part of the samples was electrolytically polished before the
Mat. Res.. Publicado em: 20/12/2019
-
14. PHYSICAL, MECHANICAL AND THERMAL BEHAVIOUR OF ADOBE STABILIZED WITH THE SLUDGE OF WASTEWATER TREATMENT PLANTS
ABSTRACT The need for treated water is essential for life. With the constant increase in population, the most common way to purify surface water is through conventional water treatment plants (WTPs). The high volume of residue (sludge) generated in this process is most often returned to the catchment site, negatively affecting the ecosystem. The sludge of WT
Eng. Agríc.. Publicado em: 09/12/2019
-
15. Contexto de trabalho e satisfação profissional de enfermeiros que atuam na Estratégia Saúde da Família
RESUMO A pesquisa objetivou avaliar o contexto de trabalho e a satisfação profissional de enfermeiros que atuam na Estratégia Saúde da Família no estado da Paraíba, estabelecendo uma análise comparativa entre equipes convencionais e do Programa Mais Médicos (PMM). Trata-se de um estudo transversal realizado com 50 enfermeiros de 34 municípios repres
Saúde debate. Publicado em: 25/11/2019
-
16. Comparative overview of innovation and patent filings in Radiopharmacy
RESUMO Objetivo Evidenciar a situação atual da Medicina Nuclear brasileira em relação à inovação, considerando a proteção à Propriedade Intelectual e suas particularidades na área. Métodos Foi realizado um levantamento comparativo do número e da origem de depósitos de patentes relacionadas a essa área no Brasil, nos Estados Unidos e em país
Einstein (São Paulo). Publicado em: 25/11/2019
-
17. Pré-tratamento físico-químico e enzimático para efluente de abatedouro
RESUMO O efluente gerado em um abatedouro de aves, contendo gordura (quantificada pela análise de Óleos e Graxas - O&G) na concentração de 1.100 mg.L-1, foi submetido a dois pré-tratamentos para redução da concentração de material orgânico particulado: um tratamento físico-químico convencional (coagulação/floculação com cloreto férrico) ou u
Eng. Sanit. Ambient.. Publicado em: 25/11/2019
-
18. Avaliação de desvio dimensional em Inconel 718 após a retificação em diferentes técnicas de lubri-refrigeração
RESUMO O Inconel 718 é uma liga à base de níquel que possui elevada resistência à fadiga e à fluência, ductilidade, rigidez, inércia química e capacidade de operar em elevadas temperaturas, por isto é bastante utilizada na fabricação de peças aeronáuticas de alto rendimento. Estas peças exigem tolerâncias dimensionais e geométricas estreitas
Matéria (Rio J.). Publicado em: 25/11/2019
-
19. Effect of Rolling Temperature on Microstructure and Mechanical Properties of a Nb-Mo Microalloyed Medium Mn Steel
Warm rolling of medium Mn steel is a promising technology to meet the needs of vehicle weight reduction and energy conservation while ensuring the safety for passengers. In this study, a novel Nb-Mo microalloyed 6.6Mn steel was subjected to a series of warm rolling tests at temperatures ranging from 630 to 690 ºC, based on the thermodynamic-based prediction
Mat. Res.. Publicado em: 11/11/2019
-
20. FIPLIQ: an alternative solution for gynecological and oral cytology
RESUMO Introdução: A citologia em meio líquido foi desenvolvida para melhorar o teste de Papanicolaou. Alguns meios líquidos são comercialmente disponíveis, no entanto, devido ao alto custo, há dificuldades para sua implementação em programas de saúde pública em muitos países. Objetivos: Estudar a adequabilidade de meios líquidos alternativos
J. Bras. Patol. Med. Lab.. Publicado em: 11/11/2019
-
21. Effects of Heat Treatment and Yb 3+ Concentration on the Downconversion Emission of Er 3+ /Yb 3+ Co-Doped Transparent Silicate Glass-Ceramics
The SiO2-Al2O3-BaF2-TiO2-CaF2 transparent silicate glass-ceramics containing BaF2 nanocrystals were successfully prepared by heat treatment process through conventional melting method. Effects of heat treatment processes and Yb3+ concentration on the downconversion (DC) emission of the co-doped Er3+/Yb3+ transparent silicate glass-ceramics were investigated.
Mat. Res.. Publicado em: 28/10/2019
-
22. Inovação e Difusão de Tecnologia na Agricultura de Várzea na Amazônia
Resumo A literatura sobre a inovação e a difusão de tecnologias no agronegócio é vasta e a explicação dominante para a disseminação de inovações enfatiza o processo de influência e fluxo de informações através de um sistema social. Questões de pesquisa relativas à inovação e difusão de tecnologias ultrapassam os limites disciplinares conv
Rev. adm. contemp.. Publicado em: 28/10/2019
-
23. Characterization of Austenite Decomposition in Steels with Different Chemical Concepts and High Potential to Manufacture Seamed Pipes for Oil and Gas Industry
This work presents the characterization of austenite decomposition kinetics in two steels during continuous cooling considering non-deformed austenite grains. Two different chemical concepts of steels were evaluated: low carbon - high manganese and a relatively new concept based on low carbon - low manganese - high niobium contents. Dilatometric experiments,
Mat. Res.. Publicado em: 21/10/2019
-
24. Remineralizing Potential of Nano-Silver-Fluoride for Tooth Enamel: An Optical Coherence Tomography Analysis
Abstract Objective: To evaluate the use of nanosilver fluoride in the enamel remineralization process through optical coherence tomography. Material and Methods: All samples were submitted to demineralization process by pH cycling during 14 days and randomly distributed into three groups (n = 11): Nanosilver Fluoride (NSF), Sodium fluoride (NaF), and negat
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 10/10/2019