Computational Modeling
Mostrando 13-24 de 480 artigos, teses e dissertações.
-
13. Modeling and hydraulic performance evaluation of a dripper device coupled to a branched water distribution network
Resumo A irrigação é responsável por aproximadamente 70% do consumo de água doce do mundo e é um dos principais fatores por trás da crescente escassez de água global. As técnicas e sistemas de irrigação são extremamente diferenciadas e complexas. Neste contexto, as ferramentas de dinâmica de fluidos computacional (CFD) ganham relevância, permit
Rev. Ambient. Água. Publicado em: 03/06/2019
-
14. Numerical fundamentals and interactive computer graphics system for the nonlinear analysis of planar frames
Abstract Recent scientific and computational advances have facilitated the analysis of slender structural systems subject to instability. With the employment of more sophisticated numerical tools and algorithms, it is possible to accurately determine the critical points (limit and bifurcation loads) as well as the post-critical behavior of the structural sys
REM, Int. Eng. J.. Publicado em: 2019-06
-
15. Analyses of reinforced concrete beams strengthened with CFRP under bending: theorical and computational approaches
Resumo Este trabalho tem como objetivo compilar o embasamento teórico do ACI 440.2R:2008 [1] com o da NBR 6118:2014 [2] a fim de levar em consideração os conceitos da norma brasileira no dimensionamento à flexão de vigas reforçadas com PRFC (Polímeros Reforçados com Fibra de Carbono). A contribuição da norma brasileira é dada particularmente no qu
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
16. On the observation of extended microstructures and localized deformations in granular materials - A feature of excat quasi-convex energy envelope
Abstract In this paper a most promising scope of the exact quasiconvex energy envelope in modeling the granular materials with microstructures is presented. This study shows that it is possible to observe both the extended microstructures and localized deformations in granular materials using a variational model based on the mathematical relaxation theory. T
Lat. Am. j. solids struct.. Publicado em: 25/04/2019
-
17. SYHDA – System of Hydrological Data Acquisition and Analysis
RESUMO A aquisição e a análise de séries hidrológicas são tarefas indispensáveis para estudos hidrológicos em bacias hidrográficas, no entanto, demandam tempo e normalmente apresentam complexidade e estão susceptíveis a erros humanos. A fim de minimizar estes problemas, frequentemente são empregadas ferramentas computacionais de análises hidrol
RBRH. Publicado em: 18/02/2019
-
18. Increasing yoghurt daily production with modeling and simulation process
RESUMO: O objetivo deste trabalho foi usar a modelagem e a simulação computacional como ferramenta de suporte aos tomadores de decisão, visando a aumentar a produtividade da agroindústria Laticínio Funarbe. Especificamente, modelou o setor atual da produção de iogurte para elaboração de análises que possibilita atender à nova demanda. Para a mode
Cienc. Rural. Publicado em: 18/01/2019
-
19. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 07/01/2019
-
20. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 20/12/2018
-
21. Computational Model for Microgeneration Simulation, From Solar and Wind Renewable Sources, With Optimal Allocation of Loads, Electric Vehicle and Energy Storage, In a Residential Electrical Micro Network
Abstract The electrical sector is under constant evolution. One of the areas refers to the consumers that come to be generators, implementing distributed generation, interconnected to a smart grid. This article discusses the improvement of an algorithm, already presented in the literature, to make the best temporal allocation of loads, electric vehicle, stor
Braz. arch. biol. technol.. Publicado em: 29/10/2018
-
22. Caracterización de compositos biocerámicos en esponjas de titanio mediante interpenetración por corriente pulsada asistida
ABSTRACT Recently, it has been directing some special attention to the development of new manufacturing processes, with engineering applications in human tissues [1]. 3D printing applied to tissue engineering requires pulse computational techniques such as stereolithographic modeling, and special manufacturing processes, to name a few; Laser Sintering or Ext
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. Behavior and design of built-up compressed steel members composed of concentric hot rolled circular hollow sections
Abstract This research presents a study of the behavior of built-up compressed steel members composed of concentric hot rolled circular hollow sections. The use of these members is an innovative solution of practical interest for situations in which a single member does not reach the required compressive strength. Some technically and economically viable de
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
24. VALIDATION OF COMPUTATIONAL METHODS APPLIED IN MOLECULAR MODELING OF CAFFEINE WITH EPITHELIAL ANTICANCER ACTIVITY: THEORETICAL STUDY OF GEOMETRIC, THERMOCHEMICAL AND SPECTROMETRIC DATA
Models validation in QSAR, pharmacophore, docking, and others, can ensure the accuracy and reliability of future predictions in design and selection of molecules with biological activity. In these study, the caffeine molecule was optimized using Hartree-Fock (HF) and Density Functional Theory (DFT/B3LYP) methods, with seven basis sets. Linear correlation dat
Quím. Nova. Publicado em: 2018-07