Cladding
Mostrando 13-24 de 52 artigos, teses e dissertações.
-
13. Evaluation of hydrogen-Induced cracking resistance of the In625 laser coating system on a C-Mn steel substrate
Abstract The corrosion of C-Mn steels in the presence of hydrogen sulfide (H2S) represents a significant challenge to oil production and natural gas treatment facilities. The failure mechanism induced by hydrogen-induced cracking (HIC) in a Inconel 625 coating / C-Mn steel has not been extensively investigated in the past. In the present work, an API 5CT ste
REM, Int. Eng. J.. Publicado em: 2017-06
-
14. Diamond Films on Stainless Steel Substrates with an Interlayer Applied by Laser Cladding
The objective of this work is the Hot Filament Chemical Vapor Deposition (HFCVD) of diamond films on stainless steel substrates using a new technique for intermediate barrier forming, made by laser cladding process. In this technique, a powder layer is irradiated by a laser beam to melt the powder layer and the substrate surface layer to create the interlaye
Mat. Res.. Publicado em: 06/03/2017
-
15. Propagation Characteristics of Optical Long Period Fiber Gratings using Graphical Solution Methods
Abstract In this paper, we explicitly show a complete analysis and detailed calculation of propagation characteristics of the effective refractive indices of the core and cladding for a long period grating employing both the Two-Layer and Three-Layer Geometries. The results are achieved employing graphical solution methods and presented in terms of the effec
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-06
-
16. The Bond Strength Behavior of Polymer-modified Mortars During a Wetting and Drying Process
Polymer-modified mortars are highly popular for setting exterior tile systems and low-porosity ceramic tiles because they possess greater flexibility and higher bond strengths than conventional mortars which increases cladding serviceability. However, the long-term performance of this application is not completely understood and many pathologies has been rep
Mat. Res.. Publicado em: 24/11/2015
-
17. Effect of Processing on Microstructure and Corrosion Mitigating Properties of Hydrotalcite Coatings on AA 6061 Alloy
Pitting corrosion of the aluminium cladding of spent nuclear fuels stored in light water pools has been observed. To prevent this, coating of the Al cladding with hydrotalcite (HTC) was proposed. This paper presents the effect of chemical bath and processing parameters on microstructure and corrosion behavior of HTC coatings on alloy AA 6061 specimens. The H
Mat. Res.. Publicado em: 03/11/2015
-
18. Liga NiCrSiBC: Microestrutura e Dureza de Revestimentos Processados a Arco e a Laser
A técnica de processamento é determinante sobre características de um revestimento. Isso porque o aporte térmico, que depende da técnica e dos parâmetros, tem influência sobre a diluição e a taxa de solidificação. Em ligas com baixa complexidade metalúrgica, o impacto do processamento com técnicas de deposição que impõem maior taxa de resfria
Soldag. insp.. Publicado em: 2015-03
-
19. Effect of plasma fluorination variables on the deposition and growth of partially fluorinated polymer over PMMA films
In this work, an investigation was made of the modification of film surface of Poly(methylmethacrylate) (PMMA) using the plasma polymerization technique. PMMA films 10 µm thick were obtained by Spin-Coating starting from a chloroform solution (15.36% w/w). The films were exposed to the plasma of CHF3 at different gas pressures and exposure times to increase
Polímeros. Publicado em: 2013
-
20. Sistemas de sensores ópticos baseados em fibra óptica de perfil-W dopada com Érbio / Optical sensing systems based on Erbium-doped W-fiber
Depressed-cladding (often referred to as dual-clad or "W"- fiber) fibers with fundamental-mode cutoffs provide high distributed losses at long wavelengths and low losses at short wavelengths. The magnitude of the abrupt transition between low-loss at short wavelengths and high-loss at long wavelengths exceeds 200 dB/km and is found to be extremely sensitive
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/07/2012
-
21. Índice de reflectancia solar de revestimientos verticales: potencial para la mitigación de la isla de calor urbana
The artificial condition of an urban environment modifies energy consumption and thermal comfort. The higher temperatures in a city center in relation to peripheral areas, lead to the formation of an urban heat island. Therefore, working on the thermo-physical properties of materials (roofs, floors and facades) is a feasible mitigation strategy to reduce the
Ambient. constr.. Publicado em: 2012-09
-
22. Estudo da viabilidade para fabricação de fibra óptica polimérica (FOP) por extrusão vertical / Study of the feasibility on manufacturing polymeric optical fiber (POF) by vertical extrusion
Polymeric optical fibers (POF) presents some advantages compared to the glass optical fibers as flexibility, higher numerical aperture (NA), ease in handling and connecting due to their larger diameter and lower cost manufacturing and installation. However, due to their larger transmission losses compared to the main applications of glass fibers, POF are lim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2011
-
23. Comparative study of fundamental properties of honey comb photonic crystal fiber at 1.55µm wavelength
Fundamental properties such as mode field distribution, real effective refractive index, imaginary effective refractive index, confinement loss of two new kinds of honeycomb photonic crystal fibers are successfully studied by using Full-Vectorial Finite element method (FV-FEM). Low confinement loss 0.1×10-4dB/km is achieved at wavelength 1.55µm in hollow c
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2011-12
-
24. Cimento de alvenaria:: uma abordagem sob a ótica da sustentabilidade
The civil construction industry consumes, around the world, a significant annual volume of cement to produce concrete and mortar. However, a great part of the cement consumption would not need, depending on the type of application, to be as strong and rich in tricalcium silicate (C3S), but is effectively enough if is rich in dicalcium silicate (C2S). Cements
Publicado em: 2010