Characterization Of Thick Films
Mostrando 1-11 de 11 artigos, teses e dissertações.
-
1. Syntesis of Carbon Nanostructures Near Room Temperature Using Microwave PECVD
Carbon nanostructures (nanotubes, nanofibers and nanosponges) were synthesized onto Si (001) substrates using a microwave assisted plasma enhanced chemical vapor deposition (PECVD) from C2H2-Ar mixtures at low substrate temperatures (120 °C). Catalytic films (Ni and Cu) 3 nm thick were used. Different structures were formed, depending on the C2H2 partial pr
Mat. Res.. Publicado em: 2015-08
-
2. Desenvolvimento de membranas de poli(éter imida) sultonada para a permeacão de gases / Development of sulfonated poly(ether imide) membranes for gas permeation
A busca por membranas com propriedades adequadas a separação de gases em escala industrial tem levado a modificação e sIntese de polImeros de engenharia, com objetivo de obter membranas com propriedades adequadas. Uma das modificaçoes que tem se apresentado promissora é a inserção de grupos sulfônicos em polImeros comerciais. Espera-se que o polImer
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/12/2009
-
3. Estudo das propriedades estruturais e ópticas em materiais nanoestruturados a base de silício. / Study of structural and optical properties in nanostructured silicon based films.
The aim of this doctorate thesis is to enhance the knowledge in the research conducted along the Master degree based on the characterization and study of the structural and luminescent properties of silicon rich silicon oxynitride films (SiOxNy:H) deposited at low temperature by Plasma Enhanced Chemical Vapor Deposition (PECVD). The results of this study ind
Publicado em: 2009
-
4. Estudo das propriedades estruturais e elÃtricas das granadas ferrimagnÃticas GdIGXYIG1-X e suas aplicaÃÃes em componentes de microondas. / Study of the strutural and electric properties of garnets ferrimagnetc GdIGXYIG1-X and its aplications in componentes of microwaves.
Due to a fast progress in the development of communication systems, the dielectric and magnetic ceramics (ferrites) have become attractive to be used in devices. Although the ferrites of the spinel type were the first material used in the microwave range, garnets have smaller dielectric losses and, therefore, are chosen for many applications. High demands fo
Publicado em: 2008
-
5. Ligas magnéticas NiFe e NiFeCo eletrodepositadas, voltadas para aplicações em micro-sensores magnéticos tipo fluxgate planar / Electrodeposited NiFe and NiFeCo films for planar fluxgate sensors
This work presents the results about the fabrication and characterization of thin films of NiFe and NiFeCo alloys. The attempts to construct the planar fluxgate are also presented. Galvanostatic electrodeposition using an electrolytic solution containing Ni and Fe was used: NiSO4 (0,7 mol/l); NiCl2 (0,02 mol/l); FeSO4 (0,03 mol/l); H3BO3 (0,4 mol/l) and C7H5
Publicado em: 2007
-
6. Development and characterization of sodium alginate active films using calcium benzoate as cross-linking agent / Desenvolvimento e caracterização de filmes ativos de alginato de sodio reticulados com benzoato de calcio
Biodegradable films are produced from natural polymers, structurized mainly by polysaccharides or proteins, and have potential applications in the medical, pharmaceutical or food area. The incorporation of active agents can extend their application as antimicotic packaging, for instance. Films were manufactured with sodium alginate, using calcium chloride as
Publicado em: 2007
-
7. Production and characterization of indium oxide and indium nitride
Thin films of indium oxide 200 nm thick and indium nitride 150 nm thick were produced by reactive sputtering deposition onto soda lime substrates. The Indium cathode was kept under vacuum attached to a high voltage dc. The In xOy films were obtained in argon-oxygen mixture with total pressure between 2 and 7 Pa, current density between 0.04 and 0.56 mA/cm²
Brazilian Journal of Physics. Publicado em: 2006-09
-
8. A silicon-polymer heterostructure for sensor applications
We report the development and characterization of high quality polyaniline-silicon heterojunction diodes appropriated for use as gas and/or ionizing radiation sensors. Polyaniline thin films 40 nm thick are an active part of the junction structure, that presents excellent electrical characteristics, with rectifying ratio of 50,000 at ± 1.0 Volt bias. The de
Brazilian Journal of Physics. Publicado em: 2002-06
-
9. "Películas Espessas de Carbeto de Silício, SiC, sobre Mulita" / Silicon carbide, SiC, thick films over mullite.
Crystalline silicon carbide, SiC, films were deposited on mullite by atmospheric pressure chemical vapor deposition (CVD) method. The characteristic of substrate surface determinate if the film will be dense or porous, while the deposition temperature defines its crystalinity and nucleation rate in film formation. During the mullite substrate preparation pro
Publicado em: 2001
-
10. Recent progress in the synthesis and characterization of amorphous and crystalline carbon nitride coatings
This review summarizes our most recent findings in the structure and properties of amorphous and crystalline carbon nitride coatings, synthesized by reactive magnetron sputtering. By careful control of the plasma conditions via proper choice of process parameters such as substrate bias, target power and gas pressure, one can precisely control film structure
Brazilian Journal of Physics. Publicado em: 2000
-
11. Caracterização eletroquímica e ótica de filmes de óxido espesso crescidos sobre ouro. / Eletrochemical and optical characterization of thick oxide films on gold electrodes.
Potentiostatic polarization of polycrystalline Au electrodes at various polarization potentials, 1.8, ..., 2.4 V, RHE, for polarization times up to 72h, in acid and basic solutions, leads to formation of four oxide states, OC1, OC2, OC3 and OC4, distinguished, in reduction, using linear-sweep voltammetry. The quasi-2d state (OC1) tends to the limit of two mo
Publicado em: 1995