Ceramic
Mostrando 13-24 de 1090 artigos, teses e dissertações.
-
13. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
14. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
15. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
16. Evaluation of the self-healing capacity of ceramics produced with alumina and silicon carbide
Abstract The self-healing capacity of a ceramic material produced by uniaxial pressing with alumina (Al2O3), silicon carbide (SiC), and magnesium oxide (MgO) was evaluated. To assess self-healing, a discontinuity was generated on the surface of the specimens. The healing time in the oven, at a temperature of 1000 ºC, was 1, 30, and 60 min. The specimens wer
Cerâmica. Publicado em: 2022
-
17. Microstructural characteristics, properties, synthesis and applications of mullite: a review
Abstract Mullite, an intermediate phase of the binary alumina-silica system, is one of the most important phases of ceramic products containing alumina and silica in the initial composition. Its stoichiometry ranges from 3Al2O3.2SiO2 (3:2) to 2Al2O3.SiO2 (2:1) and its crystalline structure is orthorhombic, characterized by the presence of octahedral chains o
Cerâmica. Publicado em: 2022
-
18. Preparation of Silicon Oxycarbide (SiCO) Ceramics from Different Polymer Architectures and Assessment on the Performance as Electrodic Materials for Voltammetric Sensing of Antioxidant Phenolic Compounds
Silicon oxycarbide (SiCO) ceramics obtained from polymer pyrolysis and with varied carbon contents were prepared and evaluated as new electrodic materials for sensing of tert butylhydroquinone (TBHQ) and butylated hydroxyanisole (BHA) antioxidants. Three polymers were synthesized varying molecular architecture and aromatic carbon groups, followed by pyrolysi
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
19. Using digital image processing and Unmanned Aerial Vehicle (UAV) for identifying ceramic cladding detachment in building facades
Resumo As ações que compõe o processo de manutenção em fachadas são orientadas pelos resultados obtidos na fase de inspeção. Algumas propostas metodológicas que visam a otimização do processo de inspeção têm sido discutidas, entre essas destacam-se as técnicas de Processamento Digital de Imagens (PDI) capturadas por Veículo Aéreo Não Tripul
Ambiente Construído. Publicado em: 2022
-
20. Three-dimensional assessment of internal adaptation measurement of three cad/cam ceramic systems
Resumo Este estudo teve como objetivo avaliar a adaptação interna de três diferentes coroas cerâmicas CAD/CAM (Computer-aided design/computer-aided manufacturing). A adaptação interna de um material cerâmico de rede com infiltração de polímero (Vita Enamic [VE]) foi comparada com duas cerâmicas de vidro maquináveis; silicato de lítio reforçado
Brazilian Dental Journal. Publicado em: 2022
-
21. Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Cerâmica. Publicado em: 2021-06
-
22. Editorial Comment: Luts-V: A new simplified score for assessing lower urinary tract symptoms in men
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
23. Oxidative Stress & Male Infertility - A necessary and conflicted indissociable marriage: How and when to call for evaluation?
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
24. Editorial Comment: Vasectomy re-reversal: effectiveness and parameters associated with its success
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06