Ceramic Powders
Mostrando 1-12 de 66 artigos, teses e dissertações.
-
1. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
2. Síntese de perovskitas tipo LaAl1-xCrxO3 para aplicação em esmalte transparente
RESUMO No Brasil, estudos sobre pigmentos cerâmicos ainda são bastante escassos. Por esta razão, grande parte dos pigmentos consumidos pela indústria cerâmica são importados dos países europeus. Outra parte destes pigmentos são obtidos pela rota cerâmica, entretanto, esta rota de síntese resulta em pigmentos com propriedades bastante heterogêneas,
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Obtenção de ferritas de cálcio dopadas com cromo visando aplicação em esmaltes transparentes brilhante e mate
RESUMO Este trabalho tem como objetivo obter óxidos com estrutura tipo espinélio de composição CaFe1,8Cr0,2O4 pelo método gelatina, visando aplicação em esmaltes transparentes brilhantes e mate. Os pós precursores, resultantes do processo de síntese, foram calcinados a 600 °C e a 800 °C para a obtenção da fase espinélio. Os pós foram caracteri
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Influência do tipo de solvente na síntese de mulita pelo método Pechini
Resumo Mulita é um aluminossilicato com grande importância na tecnologia cerâmica. Sua síntese através de métodos químicos tem sido extensivamente estudada, no entanto, não se observam estudos da sua obtenção pelo método Pechini. Assim, este estudo teve por objetivo a síntese de mulita por meio deste método. Foi avaliada a influência de diverso
Cerâmica. Publicado em: 15/08/2019
-
5. Estudo de obtenção da membrana cerâmica densa BaCeO3
RESUMO Nos últimos anos, pós cerâmicos à base de óxidos de estrutura do tipo perovskita ganharam atenção considerável devido às suas aplicações tecnológicas na área de membranas permeáveis de oxigênio. O óxido misto BaCeO3 apesenta-se como um material amplamente estudado em uma grande diversidade de aplicações, seja como materiais eletrolí
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
7. Photodegradation of Rhodamine B catalyzed by ZnO pellets
Abstract This paper describes the development of ZnO semiconductors applied as photocatalysts for the degradation of water contaminants, with the shape of ceramic pellets thick enough to maintain their structures, prepared by slip casting and sintering. The samples presented porosities around 40% and densities around 3.4 g/cm3, which represented about 61% of
Cerâmica. Publicado em: 2019-01
-
8. Densification and microstructure of Si3N4-TiN ceramic composites
Abstract Silicon nitride is a ceramic material widely used in various structural applications at high temperatures owing to its excellent combination of mechanical and thermal properties. To increase the application of Si3N4, many researches have been developed to improve its fracture toughness and processing conditions. In this study, the sintering and micr
Cerâmica. Publicado em: 2019-01
-
9. Avaliação da adição de resíduos de vidro sodo-cálcico e erva-mate em matriz cerâmica
Resumo O presente trabalho avaliou os efeitos da adição de resíduos de vidro sodo-cálcico e de erva-mate sobre a absorção de água, porosidade e resistência mecânica de um material cerâmico. Os pós homogeneizados foram compactados por prensagem uniaxial e submetidos a queima de 900 e 1100 °C a 2 °C.min-1. Os resultados mostraram que a adição de
Cerâmica. Publicado em: 2019-01
-
10. Controller for a SPS machine: a proposal PI control
ABSTRACT Temperature control is the key to effective sintering process for metal, ceramic and polymer powders. The original control temperature provides an irregular control operation process which affects the material properties due to the spacer involved in it. Furthermore, it is analyzed how the material responds to an electrical input determining a model
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Effect of Flame Spray Deposition Parameters on The Microstructure of Al2 O3 - 13 %TiO2 Coatings Applied Onto 7075 Aluminum Alloy
In this work, the effect of flame spraying parameters on physical, structural and microstructural characteristics of Al2O3 - 13 wt.% TiO2 (AT-13) coatings were studied. NiCrAl and AT-13 feedstock powders were used for spraying a bond coat (BC) and a top coat (TC), respectively, onto a 7075 aluminum alloy substrate. The effect of acetylene-to-oxygen ratio and
Mat. Res.. Publicado em: 10/07/2018
-
12. Study of the microstructure and mechanical properties of beta tricalcium phosphate-based composites with alumina addition produced by powder metallurgy
Abstract The use of alumina as a reinforcement in metallic and ceramic matrix is well-known. The purpose of this study was to investigate the effect of alumina addition according to its amount on the microstructural and mechanical behavior of tricalcium phosphate ceramic (TCP), more specifically the β-TCP. Although β-TCP has excellent bioactive and biocomp
REM, Int. Eng. J.. Publicado em: 2017-12