Calorimetry
Mostrando 1-12 de 1010 artigos, teses e dissertações.
-
1. Study of rhombohedral tricalcium phosphate in hexagonal crystal structure family on the sample prepared by the sol-gel route and the effect of calcination temperature
Abstract The effect of the calcination temperature at 800 and 1000 °C on the stable formation of the tricalcium phosphate with rhombohedral structure in the system of the hexagonal crystal family was determined, while its precursor was made from limestone obtained from nature in the Lumajang district, Indonesia. The rhombohedral tricalcium phosphate samples
Cerâmica. Publicado em: 2023
-
2. Catalytic Effects of Ruthenocene Bimetallic Compounds Derived from Fused Aromatic Ring Ligands on the Main Oxidizing Agent for Solid Rocket Motor
We report the catalytic effect of three ruthenocene bimetallic compounds derived from fused aromatic rings of general formula [{Cp*Ru}2L], with Cp*: pentamethylcyclopentadiene and L = pentalene (1), 2,6-diethyl-4,8-dimethyl-s-indacene (2), and 2,7-diethyl-as-indacene (3), on the thermal decomposition of ammonium perchlorate (AP). The new compound 3 was chara
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Evaluation of the influence of sodium and magnesium lignosulfonates on the hydration kinetics of cementitious paste
Abstract Motivated by their low cost, lignosulfonate-based water reducers are the most used type of admixture in the concrete industry worldwide. Due to the plurality of types of lignosulfonates (LSs) and the recent update to the Brazilian standard for admixtures for concrete, the objective of this work was to investigate the impact of sodium (Na-LS) and mag
Cerâmica. Publicado em: 2022
-
4. A Greener Enzymatic Oligoesterification of Biobased Renewable Synthons
Polyesters of xylitol and succinic acid were prepared yielding from 70 to 75% by enzyme-catalyzed esterification using a molar mass from 1:1 to 2:5 at 120 and 140 °C employing from 1 to 10% m/m of enzyme. Control over branching degree was achieved by tuning the reaction conditions (temperature, time, comonomer ratio, enzyme content). This one-step process f
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
5. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
6. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
7. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
8. Incorporation of Fluorescent Dyes in Electrospun Chitosan/Poly(ethylene oxide)
Polymeric films have been increasingly investigated due to the ease of miniaturization and integration in several sensor devices. Films obtained from the electrospinning technique have a controlled diameter and homogeneity, and substances can be incorporated into the polymeric network. Electrospinning fiber of chitosan (Ch) and poly(ethylene oxide) (PEO) was
J. Braz. Chem. Soc.. Publicado em: 2021-05
-
9. Compatibility by a Nonisothermal Kinetic Study of Azathioprine Associated with Usual Excipients in the Product Quality Review Process
Azathioprine is an immunosuppressive drug for several inflammatory disorders. Due to its clinical relevance, to explore the solid-state properties for excipient compatibility in the product quality review process is essential. Fourier transform infrared spectroscopy, powder X-ray diffraction and thermal analysis (thermogravimetry/derivative thermogravimetry
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
10. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats
Poly(3-hydroxybutyrate) (PHB) has been proposed to be a potential candidate to be used as biomaterial. However, its poor processability, high brittleness and rigidity have limited its applicability. Transesterification reactions with poly(ε-caprolactone) (PCL), one of the most promising biomedical materials, emerge as an attractive alternative to improve it
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
11. Blue Glow Sticks: Cinnamic Acids and Arylacrylonitriles with Liquid-Crystalline Properties and Highly Fluorescent
Five new π-conjugated chromophores derived from acrylic acid and acrylonitrile were synthesized and their thermal and photophysical behaviors were analyzed. They were designed and synthesized through Knoevenagel condensations between arylacetylenebenzaldehydes and a methylene group activated from cyanoacetic and malonic acids. The characterization of the ta
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
12. EFECTO DE LA ADICIÓN DE POLÍMEROS DE CADENA CORTA SOBRE LA ESTRUCTURA QUÍMICA, PROPIEDADES MECÁNICAS, TÉRMICAS Y BIOLÓGICAS DE POLIURETANOS SINTETIZADOS CON DIISOCIANATOS ALIFÁTICOS Y ACEITE DE HIGUERILLA
The objective of this research was to synthesize biocompatible polyurethanes, with suitable mechanical properties to be used as biomaterials. Polyurethanes were synthesized with polyols derived from castor oil and isophorone diisocyanate (IPDI), hexamethylene diisocyanate and 4,4’-methylenebis (cyclohexyl isocyanate), with the addition of polycaprolactone/
Quím. Nova. Publicado em: 2021-01