Cad Cam System
Mostrando 1-12 de 23 artigos, teses e dissertações.
-
1. Effect of Self-Etching Primer Associated to Hydrofluoric acid or Silane on Bonding to Lithium Disilicate
Resumo Avaliar o efeito da combinação de ácido fluorídrico ou silano com o primer autocondicionante de cerâmicas sobre a eficácia da união imediata e após 1 ano de armazenamento em água, padrão de condicionamento e interação química desses tratamentos com o dissilicato de lítio. Um total de 16 blocos CAD/CAM de dissilicato de lítio (DL) foram
Braz. Dent. J.. Publicado em: 04/04/2019
-
2. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018
-
3. Reliability of light microscopy and a computer-assisted replica measurement technique for evaluating the fit of dental copings
Abstract The aim of this in vitro study was to assess the reliability of two measurement systems for evaluating the marginal and internal fit of dental copings. Material and Methods: Sixteen CAD/CAM titanium copings were produced for a prepared maxillary canine. To modify the CAD surface model using different parameters (data density; enlargement in differe
J. Appl. Oral Sci.. Publicado em: 01/02/2018
-
4. Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system
Objective This study investigated the marginal and internal adaptation of individual dental crowns fabricated using a CAD/CAM system (Sirona’s BlueCam), also evaluating the effect of the software version used, and the specific parameter settings in the adaptation of crowns. Material and Methods Forty digital impressions of a master model previously pre
J. Appl. Oral Sci.. Publicado em: 2015-10
-
5. Influence of surrounding wall thickness on the fatigue resistance of molars restored with ceramic inlay
The purpose of this study was to evaluate the influence of buccal and lingual wall thickness on the fatigue resistance of molars restored with CAD/CAM ceramic inlays. Forty human third molars were selected and divided into 4 groups, according to the remaining surrounding wall thickness chosen for inlay preparation (n = 10): G1, 2.0 mm; G2, 1.5 mm; G3, 1.0 mm
Braz. oral res.. Publicado em: 11/06/2014
-
6. Dimensional stability of a novel polyvinyl siloxane impression technique
AIM: To introduce a modification of the reline impression technique (MRIT), and compare the dimensional changes of impressions obtained by MRIT and by conventional reline impression technique (CRIT). METHODS: An acrylic resin tablet was milled by a CAD-CAM system to simulate three abutments (A, B and C) with different distances among them. The abutment
Braz. J. Oral Sci.. Publicado em: 2014-04
-
7. Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technology
The objective of the study was to measure the marginal and internal fit of zirconia-based all-ceramic three-unit fixed partial dentures (FPDs) (Y-TZP - LAVA, 3M-ESPE), using a novel methodology based on micro-computed tomography (micro-CT) technology. Stainless steel models of prepared abutments were fabricated to design FPDs. Ten frameworks were produced wi
Braz. oral res.. Publicado em: 2013-09
-
8. Geração de b-splines via FPGA / B-spline generation via FPGA
The b-splines are used in CAD/CAM/CAE systems to represent and define complex curves and surfaces, being adopted by the main computer graphics standards due to features like compact mathematic representation, flexibility and affine transformations. In 3D acquisition systems and integrated CAM-CNC systems, the use of the b-spline in the geometric information
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
9. Contribuição para os usuários de sistemas CAD/CAM/CNC em operação de fresamento de topo em aço para moldes e matrizes / Contribution to the users of systems CAD/CAM/CNC in end milling operation in steel for molds and dies
The increased in the demand for plastic products and the need for reduction manufacturing times, and the growing dependence of man on the computer in present day, especially in manufacturing activities, has resulted in constant research of technological developments in order to supply these needs. In dies and molds manufacturing industry for plastic injectio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/06/2011
-
10. "Automação do processo de detalhamento de torres metálicas via tecnologia CAD"
This work presents the design and implementation of a computer system denominated TowerCAD for automation of the detailing process of steel towers structures by integrating CAD (Computer Aided Design), CAE (Computer Aided Engineering) and CAM (Computer Aided Manufacturing) technologies. The TowerCAD system integrates a CAD application and a database. The sys
Publicado em: 2010
-
11. Avaliação da resistência à fratura de coroas totais confeccionadas pelo Sistema Zirkonzahn®, em função de diferentes agentes de cimentação / Evaluation of fracture resistance of ceramic crowns made by Zirkonzahn® System, according to each luting agent
O presente estudo teve como objetivo investigar a resistência à fratura de coroas totais confeccionadas em zircõnia tetragonal policristalina estabilizada por ítrio (Y-TZP), após serem submetidas ao ensaio de resistência à fadiga termomecânica, frente a diferentes agentes de cimentação. Foram utifizados sessenta incisivos bovinos recém extraídos,
Publicado em: 2010
-
12. Mechanical behavior of ceramic materials used for fixed partial dentures / Comportamento mecânico de cerâmicas utilizadas na confecção de próteses parciais fixas
Objectives: to determine the flexural strength (f), Weibull modulus (m), slow crack growth coefficient (n) and fracture toughness (KIC) of three ceramics used as framework materials for fixed partial dentures (FPDs) (YZ- yttria partially stabilized zirconia tetragonal polycrystals; IZ- alumina-based zirconia-reinforced glass infiltrated ceramic; AL alumina p
Publicado em: 2010