Butadiene
Mostrando 1-12 de 112 artigos, teses e dissertações.
-
1. Short Circuit and Recovery Time Tests in a helical bifilar R-SFCL module
Abstract Superconducting Fault Current Limiter (SFCL) modules with distinct arrangements have been investigated, seeking design and performance enhancements. In this context, this work aims to propose a design for resistive SFCL (R-SFCL) modules, using RE-Ba-Cu-O high-temperature superconducting tapes (HTS) wound on an alternative support material. An R-SFCL
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
2. CONSTRUÇÃO DE UM SUPORTE AJUSTÁVEL LAB-MADE IMPRESSO EM 3D PARA MEDIÇÃO DE ÂNGULO DE CONTATO
Advances in the use of 3D printing technology have led to the development of new low-cost devices. This technology features high versatility, considering the easy modulation of the materials depending on its objectives and applications. In this sense, we have developed a laboratory-built contact angle measuring device (lab-made). The device was composed by t
Quím. Nova. Publicado em: 2020-09
-
3. SPRAY RETENTION ON COFFEE LEAVES ASSOCIATED WITH TYPE AND CONCENTRATION OF ADJUVANTS
ABSTRACT Agricultural spray adjuvants (ASA) are widely used in pesticide applications to enhance the performance of pesticides. The aim of this research was to investigate the effects of ASA on static surface tension (SST) and foliar spray retention on coffee leaves. The SST of ASA at different concentrations was determined by the drop weight method. Spray r
Eng. Agríc.. Publicado em: 04/11/2019
-
4. Modelo de Treinamento para Inserção de Dispositivos Intrauterinos
RESUMO Introdução Aprender praticando exclusivamente em pacientes é cada vez menos aceitável no ensino médico. O ensino baseado em simulação é uma ferramenta capaz de gerar aquisição de habilidades e competências de forma eficaz e em ambiente controlado, sem causar dano ao paciente. A Ginecologia é uma especialidade médica que depende de trein
Rev. bras. educ. med.. Publicado em: 14/10/2019
-
5. Influência do envelhecimento termo-oxidativo nas propriedades mecânicas e de amarelamento de blendas de poliestireno com borracha reciclada de estireno-butadieno (SBR)
RESUMO Este trabalho teve como objetivo avaliar o envelhecimento termo-oxidativo, nas propriedades mecânicas e de índice de amarelamento (YI), de blendas de poliestireno com borracha reciclada (SBRr), compatibilizadas. As blendas foram preparadas, inicialmente, em uma extrusora de rosca dupla corrotacional e, posteriormente, os grânulos extrudados foram m
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Performance Analysis of X Band Horn Antennas using Additive Manufacturing Method Coated with Different Techniques
Abstract In this study are analyzed horn antennas to operating at X band (8 – 12 GHz) and manufactured by additive manufacturing method (AM). To construct the antennas using AM method was necessary made the structure with acrylonitrile butadiene styrene (ABS) thermoplastic using a 3D printer, and then coated the antennas with conductive surfaces. Were fabr
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
7. Selecting chemicals for separation of ABS and HIPS in WEEE by froth flotation
Abstract The feasibility of using common chemicals to separate plastics from waste electrical and electronic equipment (WEEE) by froth flotation is investigated. Plastic waste is one of the WEEE polluters and a separation is necessary to recycle it. The most common plastics in electronic industries are acrylonitrile-butadiene-styrene (ABS) and high impact po
Polímeros. Publicado em: 10/06/2019
-
8. SPME Fiber Evaluation for Volatile Organic Compounds Extraction from Acerola
Volatile organic compounds (VOCs) were isolated from acerola fruits (Malpighia emarginata D.C.), by means of different solid phase microextraction (SPME) fibers. For the extraction, the headspace SPME method was used, identifying the VOCs by gas chromatography (GC) with mass spectrometry (MS). The objective of this work was to evaluate the efficiency of SPME
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
9. Composition Determination of Rubber Blends by Applying Differential Scanning Calorimetry and SPA-PLS Treatment
This paper proposes an innovative approach to determine the composition of natural rubber (NR) and styrene butadiene rubber (SBR) blends from the analysis of the data provided by the differential scanning calorimetry (DSC) technique. DSC registers are post-processed, based on a multivariate chemometric approach, consisting in the application of the successiv
Mat. Res.. Publicado em: 07/01/2019
-
10. Quantification by FT-IR (UATR/NIRA) of NBR/SBR blends
Abstract Rubber blends are important materials in automotive industry, as well as in other sectors. However, there are implications when suitable use of a polymer in an artifact is not made. In the automotive area, for example, the use of an elastomer without the fuel resistance requirement would result in component degradation, potential fuel leakage, and
Polímeros. Publicado em: 29/11/2018
-
11. Preparation and Characterization of Hollow Glass Microspheres- Reinforced Poly (acrylonitrile-co-butadiene-co-styrene) Composites
In this study, poly(acrylonitrile-co-butadiene-co-styrene)/hollow glass microspheres (ABS/HGM) composites were prepared by means of a twin-screw extruder. HGM were incorporated at different loadings of 2.5, 5.0, and 7.5 wt.% at the central extruder zone with different types of ABS. The morphological, physical, thermal, rheological and mechanical properties o
Mat. Res.. Publicado em: 17/09/2018
-
12. Efecto de la adición de bentonita sobre las propiedades ópticas de diferentes materiales compuestos poliméricos
ABSTRACT In this work, composite materials were obtained by the incorporation of bentonite to biodegradable and synthetic polymeric matrices. Commercial (BE) and natural (BM) bentonite samples were employed, as well as three different polymeric matrices: thermoplastic corn starch (TPS), high density polyethylene (HDPE) and a poly(styrene-b-butadiene-b-styren
Matéria (Rio J.). Publicado em: 19/07/2018