Beam To Column
Mostrando 1-12 de 58 artigos, teses e dissertações.
-
1. Experimental analysis of built-up cold-formed steel lipped channel stub column
Abstract This article reports the results of experimental tests conducted on built-up cold-formed steel (CFS) stub columns, composed of double lipped channel members connected with self-drilling screws, which will be applied as the chord members of laced columns. These experiments aim to quantify the effect of four distinct web fastener layouts on the compos
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
2. Beam-Column Joints Reinforcement Detailing Adequacy in Case of a Corner Column Loss-Numerical Analysis
Abstract This study investigates the behavior of reinforced concrete (RC) beam-column joints at the corner panel after a ground corner column loss scenario. The ductility of a frame is dependent on the ductility of its components, particularly its joints. Deficiency in joints performance can be related to an unexpected event. For example, the removal of a gr
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
3. Seismic Upgrading of Exterior Reinforced Concrete Frame with Small Column and Joint Area Using Externally Attached Steel Column
Abstract This paper presents cyclic load test of five exterior reinforced concrete frames. All the specimens represent a substandard single-span, low-rise reinforced concrete frame building which behaves a weak column-strong beam mechanism under a strong seismic loading. The first three exterior frames M1, M2 and M3 were designed for the joint shear critical
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
4. FE Modeling and Seismic Performance Evaluation of Hybrid SMA-Steel RC Beam-Column Joints
Abstract Severe permanent deformations of buildings during earthquakes have been found as one of the major causes of the instability and failure of structures. The application of superelastic Shape Memory Alloy rebars at the plastic hinge region of reinforced concrete beam-column joints (SESMA-BCJs) can eliminate the seismic residual deformations. Such self-
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
5. Experimental and numerical evaluation of mortar specimens shape and size influence on compression tests
Resumo A resistência à compressão axial de compostos cimentícios é um parâmetro importante para classificação, aferição de qualidade e dimensionamento desses materiais. Os valores obtidos nos ensaios são diretamente influenciados pelas propriedades intrínsecas dos compostos e por fatores externos, como dimensão e forma dos corpos de prova. O pre
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
6. Uso do diafragma externo na ligação entre viga de seção I e pilar tubular de seção circular
Resumo O diafragma externo na ligação entre viga metálica de seção I e pilar metálico tubular de seção circular tem por objetivo o aumento na eficácia da transferência dos esforços. A proposta é dar alternativas ao uso desse sistema estrutural, reduzindo a limitação imposta por sua simples ligação ao se adicionar esse elemento, similar a um a
Ambient. constr.. Publicado em: 2019-03
-
7. Experimental and numerical study of I-shape slit dampers in connections
Abstract This paper proposes a new beam to column connection which has slit dampers to increase ductility and moment capacity of structures. After Northridge and Kobe earthquakes, many researchers have tried to achieve more ductile connections. Ductility of connections causes to dissipate more energy before failure of connections. Also, some researchers have
Lat. Am. j. solids struct.. Publicado em: 14/11/2018
-
8. Optimal design of beam-column connections of plane steel frames using the component method
Abstract This paper presents a methodology for optimization of beam-column connections of plane steel frames. The objective is to obtain beam- column connections mechanically more efficient and with minimum cost by determination of the optimal dimensions for the components of the connection; satisfying mechanical constraints associated with the bending momen
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
9. Numerical simulation of bolted connections
Abstract This article presents the modeling of a complete bolted connection based on a model with one bolt connecting two or three plates. Initially, the behavior of this model with one bolt is analyzed by comparing it with existing bibliography for 3 different types of applied load: tension, shear and a combination of these two. This model includes all nece
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
10. Reinforced Concrete Beam-Column Inverted Knee Joint Behaviour after Ground Corner Column Loss-Numerical Analysis
Abstract Beam-column joints are critical component in the load path of reinforced concrete (RC) frames, due to their role in transferring loads among different RC frame components. The loss of a ground corner column in a RC frame turns an exterior joint into an inverted knee joint and recent code provisions for exterior joints are not sufficient to knee join
Lat. Am. j. solids struct.. Publicado em: 04/10/2018
-
11. On the Nonlinear Transient Analysis of Planar Steel Frames with Semi-Rigid Connections: From Fundamentals to Algorithms and Numerical Studies
Abstract This paper presents the fundamentals for prediction of a more realistic behavior of planar steel frames with semi-rigid connections under dynamic loading. The majority of the research in this area concentrates on the nonlinear static analysis of frames with semi-rigid connections. Indeed, few studies have contributed to the nonlinear dynamic and vi
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
12. Finite Element Analysis of Reinforced Concrete Beam-Column Connections with Governing Joint Shear Failure Mode
Abstract Reinforced concrete (RC) beam-column connections especially those without transverse reinforcement in joint region can exhibit brittle behavior when intensive damage is concentrated in the joint region during an earthquake event. Brittle behavior in the joint region can compromise the ductile design philosophy and the expected overall performance of
Lat. Am. j. solids struct.. Publicado em: 2017-08