Atomic Processes
Mostrando 1-12 de 118 artigos, teses e dissertações.
-
1. SEQUENTIAL MULTI-ELEMENT DETERMINATION OF TRACE-METALS IN BIODIESEL SAMPLES USING HR-CS FAAS
In this work the feasibility of sequential multi-element determination of Zn, Fe, Mg, Cu, Na, K, Cr, Al and Ca in biodiesel samples by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS) was investigated. Biodiesel samples obtained from different sources and different chemical processes were analysed. The samples were diluted w
Quím. Nova. Publicado em: 2021-02
-
2. Plasma Treatment of Polyamide Fabric Surface by Hybrid Corona-Dielectric Barrier Discharge: Material Characterization and Dyeing/Washing Processes
In this study, the hybrid corona-dielectric barrier discharge plasma treatment was employed to modify the physical, chemical and morphological characteristics of a half-knitted fabric composed of 92% polyamide 6.6 and 8% elastane (PA). These properties of the fabric were evaluated by the water contact angle, x-ray diffraction, infrared spectroscopy, scanning
Mat. Res.. Publicado em: 28/11/2019
-
3. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
4. MAGNETOMETRIA IN-SITU PARA CARACTERIZAÇÃO DE MATERIAIS ELETRODEPOSITADOS
We have recently made studies of electrodeposits of Co onto graphene attached to different substrates, successfully performed via in-situ magnetization measurements. The magnetic analysis of deposits as a function of time lapse, indicate that Co grows with different magnetic characteristics from the beginning to the end of each run, independent of the substr
Quím. Nova. Publicado em: 18/07/2019
-
5. Obtenção de hydrochar a partir de carbonização hidrotérmica de cascas do fruto de Magonia pubescens A. St. Hil. Sapindaceae: Caracterização e avaliação em processo de adsorção
RESUMO A Carbonização hidrotermal (HTC) de cascas do fruto de Magonia pubescens A. St. Hil. Sapindaceae (Tingui do cerrado) é apresentada como uma proposta inédita na produção de hydrochars a partir de precursores de espécies do Cerrado Brasileiro, onde se verificou a influência da temperatura nas propriedades dos materiais obtidos. Os hyrochar obtid
Matéria (Rio J.). Publicado em: 10/06/2019
-
6. Human Embryonic Stem Cell-Derived Mesenchymal Progenitor (hESCs-MP) Growth on Nanostructured Ti6Al4V Surfaces
Nanotexturing processes that focus on enhancing the bone-implant contact, such as electropolishing, have been proposed. The aim of this work was to evaluate the influence of Ti6Al4V surface morphology on human embryonic stem cell-derived mesenchymal progenitor (hESCs-MP) growth. Three surface treatments were used in this study: mechanically polished samples
Mat. Res.. Publicado em: 30/07/2018
-
7. Cellulose Nanostructures Obtained from Waste Paper Industry: A Comparison of Acid and Mechanical Isolation Methods
The paper industry primary waste is usually deposited in landfills or incinerated. This material has a high content of lignocellulosic components, which could be converted to cellulose nanostructures (CNS). This study aimed to compare compositional (Fourier transform infrared spectroscopy), thermal (thermogravimetric analysis), morphological (scanning electr
Mat. Res.. Publicado em: 29/06/2017
-
8. Structural Characterization of ZnTe Grown by Atomic-Layer-Deposition Regime on GaAs and GaSb (100) Oriented Substrates
This work presents the characterization of ZnTe nanolayers grown on GaAs and GaSb (100) substrates by the Atomic Layer Deposition (ALD) regime. Under certain conditions, the alternating exposition of a substrate surface to the element vapours makes possible the growth of atomic layers in a reactor where the atmosphere is high-purity hydrogen. ZnTe was grown
Mat. Res.. Publicado em: 23/03/2017
-
9. Sinais de fundo em análise instrumental: uma discussão essencial em cursos de graduação
Understanding instrumental analysis is essential for obtaining reliable analytical results required by chemists in a variety of research areas and industrial activities. All instrumental techniques involve undesirable background (BG) signals originated either from concomitants in the sample or by spurious (e.g. electrical or optical) effects intrinsically re
Quím. Nova. Publicado em: 2017-02
-
10. OTIMIZAÇÃO MULTIVARIADA DE METODOLOGIA PARA DIGESTÃO DE MICROPARTÍCULAS POLIMÉRICAS CARREADORAS DE CÁTIONS METÁLICOS
There are not reports in the literature of digestion processes of metallic cation carrier microparticles. Multivariate experimental designs were utilized to ensure an appropriate digestion for further analysis by atomic absorption spectroscopy. It was used a heater plate and the polimeric degradation was evaluated utilizing an analyzer of total organic carbo
Quím. Nova. Publicado em: 2017-01
-
11. Study of the Adsorption of Arsenic (III and V) by Magnetite Nanoparticles Synthetized via AACVD
Globally, water pollution is mainly caused by the presence of heavy metals and metalloids such as arsenic. The majority of the techniques employed in the removal are of low efficiency and high cost. Therefore, in this work it is presented the adsorption processes of arsenic (As III and V) ions employing magnetite nanoparticles (MNPs) synthesized by the aeros
Mat. Res.. Publicado em: 08/12/2016
-
12. APPLICATION OF THERMAL PLASMA FOR INERTIZATION OF SLUDGE PRODUCED DURING TREATMENT OF LANDFILL LEACHATE
One of the outstanding issues of concern by governments and society in general relates to the final destination of solid waste, which can bring severe impacts on social, political, economic and environmental dimensions. The sustainable development of enterprises and industries goes for the care of the planet, thus ensuring the quality of life for future gene
Quím. Nova. Publicado em: 2016-09