Vibrations of beams with a variable cross-section fixed on rotational rigid disks
AUTOR(ES)
Zolkiewski, Slawomir
FONTE
Lat. Am. j. solids struct.
DATA DE PUBLICAÇÃO
2013-01
RESUMO
The work is focused on the problem of vibrating beams with a variable cross-section fixed on a rotational rigid disk. The beam is loaded by a transversal time varying force orthogonal to an axis of the beam and simultaneously parallel to the disk's plane. There are many ways of usage of the technical moveable systems composed of elements with the variable cross-sections. The main applications are used in numerous types of turbines and pumps. The paper is a kind of introduction to the dynamic analysis of above mentioned beam systems. The equations of motion of rotational beams fixed on the rigid disks were derived. After introducing the Coriolis forces and the centrifugal forces, the transportation effect in the mathematical model was considered. This particular project is the first stage research, where there were proposed certain solutions of problems connected with the linear variable cross-sections systems. The further investigation considering the nonlinear systems has been proceeding. The results, analysis and comparison will be presented in the future works.
Documentos Relacionados
- A Cross-section Anatomy
- Numerical analysis of reinforced concrete asymmetric cross-section beams under oblique bending
- New hybrid approach for free vibration and stability analyses of axially functionally graded Euler-Bernoulli beams with variable cross-section resting on uniform Winkler-Pasternak foundation
- Numerical Analysis of Twin-Roll Casting of Strips With Profiled Cross-Section
- Optimal design of a set of permanent magnet generators with the same cross-section