TiO2 thin Films for Biofouling Applications
AUTOR(ES)
Soethe, Viviane Lilian, Delatorre, Rafael Gallina, Ramos, Eder Marlon, Parucker, Moisés Luiz
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
23/10/2017
RESUMO
This work presents a study of TiO2 thin films prepared by sputtering, for using as protection for biofouling action on marine structures. Titanium oxide thin films were prepared with different amount of oxygen on the surface of regular 1020 steel, a structural material for marine technology. The cristalline structure analysis evidenced the formation of anatase and rutile phases, as well as an amorphous phase of titanium oxide. Roughness measurements shown that the surface finish can contribute to the fixation of microorganisms. The crystalline TiO2 thin films was evaluated as a potential biofouling protective coating. Contact angle measurements revealed that under UV-C light, the material evidenced a changing in wettability from hydrophobic to hydrophilic behavior, what is associated to the activation of photocatalytic reactions that is nocive for living beings on its surface. The effect of marine ambient on sample corroborates this conclusion, where after 6 months of exposure it was not sufficient for growing of biofouling on surface.
Documentos Relacionados
- Synthesis and characterization of nanostructured TiO2 and TiO2/W thin films deposited by co-sputtering
- Sol-Gel TiO2 thin films sensitized with the mulberry pigment cyanidin
- TiO2 thin film growth using the MOCVD method
- N and F Codoped TiO2 Thin Films on Stainless Steel for Photoelectrocatalytic Removal of Cyanide Ions in Aqueous Solutions
- Investigations on the Synthesis, Optical and Electrical Properties of TiO2 Thin Films by Chemical Bath Deposition (CBD) method