THERMAL HYDRAULIC ANALYSIS OF SMOOTH AND FINNED ANNULAR DUCTS / ANÁLISE TERMOHIDRÁULICA DE SEÇÕES ANULARES LISAS E ALETADAS

AUTOR(ES)
FONTE

IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia

DATA DE PUBLICAÇÃO

05/10/1987

RESUMO

The present work is concerned with the turbulent heat transfer and pressure drop in smooth and finned annular ducts. Average heat transfer coeeficients have been obtained by means of the heat exchanger theory. In addition, friction factors have also been determined. The experiments were performed by utiling four double-pipe heat exchangers. The average heat transfer coefficients, for air flowing in the annular section, were fertmined by measuring the overall heat transfer coefficients of the heat exchangers. In order to aatain fully developed conditions, the heat exchangers had a starting length of 30 hydrualic diameters. The thermal boundary conditions consisted of uniform temperature on the inner surface, the outer surface being insulate. The heat transfer coefficients and friction factors are presented in dimensinless forms, as functions of the Reynolds number of the fow. The results for smooth and finned annular ducts were compared. The purpose of such comparison was to study the influence of the fins on the pressure drop and heat transfer rate. In the case of the finned annular ducts, it is shown that fin efficiency has some influence on the heat transfer rates. Then a two-dimensional heat transfer analysis was performed in order to obtain the fin efficiency and the annular region efficiency. It is also shown that the overall thermal performance of finned surfaces depends mainly of the Nusselt number and on the region efficiency. These parameters are presented as functiond of the Reynolds number of the flow and the geometry of the problem.

ASSUNTO(S)

transferencia de calor heat transfer perda de carga pressure loss secoes anulares lisa e aletadas smooth and finned annular ducts

ACESSO AO ARTIGO

Documentos Relacionados