STUDY OF PARAMETERS AFFECTING THE COALESCENCE OF DIMETHYL DISULFIDE DROPS IN A MEROX UNIT
AUTOR(ES)
Kasmaee, Mohammad
FONTE
Braz. J. Chem. Eng.
DATA DE PUBLICAÇÃO
13/01/2020
RESUMO
Abstract This study focuses on the coalescence of dimethyl disulfide drops with the mother phase at a flat aqueous-organic interface between dimethyl disulfide and different sodium hydroxide solutions. Drop coalescence is an important part of the Merox process for regenerating the solvent. A digital high-frame rate camera was used for recording drops coalescence and duration time. Drops of dimethyl disulfide were directed in different sodium hydroxide solutions as the continuous phase. Applying the experimental design method, the influences of independent variables of drop size and physical properties on coalescence time were investigated. Computational fluid dynamics (CFD) was employed to simulate the drops released from a nozzle, moving toward the interface, and the CFD results were validated by experimental data. The maximum deviation between the predicted and experimental coalescence times was 18.7%. It was found that, among the physical properties, interfacial tension plays the most important role on the coalescence time. Based on the results, a correlation for coalescence time was proposed.
Documentos Relacionados
- A study of parameters affecting the solvent extraction of lactic acid from fermentation broth
- Identification of dimethyl disulfide-forming bacteria isolated from activated sludge.
- Study of the parameters affecting ion beam emerging from cold conical cathode ion source
- Removal of methanethiol, dimethyl sulfide, dimethyl disulfide, and hydrogen sulfide from contaminated air by Thiobacillus thioparus TK-m.
- Atenolol eye drops in glaucoma: a double-masked, controlled study.