Síntese e caracterização das fases minerais C3S, C2S, C3A e C4AF para utilização em cimento tipo Portland

AUTOR(ES)
FONTE

Cerâmica

DATA DE PUBLICAÇÃO

2019-01

RESUMO

Resumo As principais fases contidas no cimento Portland são 3CaO.SiO2 (C3S), 2CaO.SiO2 (C2S), 3CaO.Al2O3 (C3A) e 4CaO.Al2O3.Fe2O3 (C4AF). No processo industrial estas apresentam incorporações de outros elementos que dependem das matérias-primas e dos combustíveis utilizados na queima. O uso das fases puras auxilia na compreensão dos fenômenos envolvidos no estado fresco e endurecido, porém sua produção isolada exige condições específicas. O objetivo foi realizar a síntese das fases com o intuito de obter a menor quantidade de polimorfos e CaO. Na caracterização das fases químicas foram utilizadas as análises de granulometria a laser, fluorescência de raios X e difração de raios X com a quantificação das fases pelo método de Rietveld. Foi obtida elevada pureza para o C4AF e o C3A. O C3S e o C2S apresentaram apenas um polimorfo, porém elevados teores de CaO, 4,9 e 5,1%, respectivamente.Abstract The main phases contained in the Portland cement are 3CaO.SiO2 (C3S), 2CaO.SiO2 (C2S), 3CaO.Al2O3 (C3A), and 4CaO.Al2O3.Fe2O3 (C4AF). In the industrial process, these phases present incorporations of other elements that depend on the raw materials and the fuels used in the firing. The use of the pure phase helps in understanding the phenomena involved in the fresh and hardened state, however their isolated production requires specific conditions. The objective of this research was to perform the synthesis of the phases in order to obtain the minimum of polymorphs and CaO. In the characterization of the chemical phases obtained, the laser particle-size analysis, X-ray fluorescence and X-ray diffraction with the quantification by Rietveld method were used. High purity could be obtained for C4AF and C3A. The C3S and C2S phases had at most one polymorph, but high levels of CaO, 4.9 and 5.1%, respectively.

Documentos Relacionados