Sequential voltammetric determination of chromium, thallium, cadmium, lead, copper and antimony in saline hemodialysis concentrates using electrolyte pH gradient
AUTOR(ES)
Nascimento, Paulo C, Schneider, Alexandre B, Bohrer, Denise, Carvalho, Leandro M. de, Jost, Cristiane L
FONTE
Journal of the Brazilian Chemical Society
DATA DE PUBLICAÇÃO
2011-05
RESUMO
The sequential voltammetric determination of chromium, thallium, cadmium, lead, copper and antimony in dialysate concentrates (DCs), is presented herein. Chromium was quantified by adsorptive cathodic stripping voltammetry and thallium, cadmium, lead, copper and antimony were assayed by anodic stripping voltammetry. The novel method developed to test these samples exploits the effect of electrolyte pH gradient on voltammetric response. The limits of detection (LOD) ranged from 0.03 µg L-1 for cadmium to 0.27 µg L-1 for copper. Recoveries from spiked samples were 92.0-117.5%. This method was applied to the analysis of commercial DCs, where the investigated metals were found in some samples at concentrations between 0.16 µg L-1 for antimony and 140.00 µg L-1 for copper. Interferences and the reference method are discussed
Documentos Relacionados
- DETERMINAÇÃO SEQUENCIAL DE CROMO, TÁLIO, CÁDMIO, CHUMBO, COBRE E ANTIMÔNIO EM CONCENTRADO POLIELETROLÍTICO PARA HEMODIÁLISE POR VOLTAMETRIA DE REDISSOLUÇÃO ATRAVÉS DE UM GRADIENTE DE pH
- Levels of Chromium, Copper, Iron, Magnesium, Manganese, Selenium, Zinc, Cadmium, Lead and Aluminium of honey varieties produced in Turkey
- Heavy metal pollution among autoworkers. II. Cadmium, chromium, copper, manganese, and nickel.
- Dietary risk assessment of fluoride, lead, chromium, and cadmium through consumption of Tieguanyin tea and white tea
- Separation and Pre-concentration of Cadmium, Copper, Lead, Nickel and Zinc by Solid-Liquid Extraction of their Cocrystallized Naphthalene Dithizone Chelate in Saline Matrices