Relation between in-vitro wear and nanomechanical properties of commercial light-cured dental composites coated with surface sealants
AUTOR(ES)
Santos Jr, Emanuel, Nascimento, Kelma D. P., Camargo Jr, Sérgio S.
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
25/06/2013
RESUMO
This work investigates the correlation between the in-vitro wear resistance and the nanomechanical properties of dental sealants commercially available. Mechanical properties, namely hardness (H) and elastic modulus (E), were assessed by nanoindentation technique. The coated samples presented lower H and E values than the Z250 composite resin substrate. Such measurements were used to calculate H/E ratios. Wear tests were carried out in water by using a pin-on-plate apparatus. Scars formed on the samples were qualitatively examined by optical microscopy, while their wear depths were measured by contact profilometry. Based on the findings, an empirical correlation between the wear depths and H/E was obtained. A high H/E ratio was associated to surfaces with enhanced wear resistance. For the tribological conditions here employed, the H/E ratio could be, therefore, considered a useful parameter for ranking the in-vitro wear of dental sealants.
Documentos Relacionados
- Surface energy and wettability of polymers light-cured by two different systems
- Clinical wear of approximal glass ionomer restorations protected with a nanofilled self-adhesive light-cured protective coating
- Effect of the increase of energy density on knoop hardness of dental composites light-cured by conventional QTH, LED and xenon plasma arc
- Influence of etching time and bonding strategies on the microshear bond strength of self- and light-cured pit-and-fissure sealants
- Optimizing light-cured composite through variations in camphorquinone and butylhydroxytoluene concentrations