Processing of Copper Based Foil Hardened with Zirconia by Non-Deformation Method
AUTOR(ES)
Vieira Junior, Luiz Eloi, Bendo, Tatiana, Nieto, Maria Izabel, Klein, Aloísio Nelmo, Hotza, Dachamir, Moreno, Rodrigo, Rodrigues Neto, João Batista
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
18/05/2017
RESUMO
Flat sintered copper and copper-zirconia substrates, with zirconia nanoparticles contents of 1 and 3 vol%, were produced by aqueous tape casting and controlled sintering. Aqueous suspensions were prepared to a solid content of 58 vol% using 3 wt% commercial binder emulsion. The green tapes were treated at 350 ºC in air to remove organics and sintered at temperatures ranging from 800 to 1000 ºC in atmosphere of Ar/5%H2. Copper tapes reached almost full densification at 900 ºC. Composite with 1 vol% zirconia, sintered at 800 ºC, maintained high density and provided a noticeable increase of the mechanical strength, whereas further additions up to 3 vol% reduced the densification and the resulting mechanical performance became poorer.
Documentos Relacionados
- Synthesis of Triazoles by Electro-Assisted Click Reaction Using a Copper Foil Electrode
- DNA sequencing by hybridization: 100 bases read by a non-gel-based method.
- Antimony (V) Oxide Adsorbed on a Silica-Zirconia Mixed Oxide Obtained by the Sol-Gel Processing Method: Preparation and Acid Properties
- Influence of a cold deformation process by drawing on the electrical properties of copper wires
- Ultrastructural Changes during Swelling and Contraction of Mitochondria from Cold-hardened and Non-hardened Winter Wheat 1